rotary die cutter used for sale

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 930 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 B14 -Flange: Ø 160 mm -Protection class: IP 33 -Dimensions: 355/260/H195 mm -Weight: 25 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Number: 2 motors available -Price: per piece -Dimensions: 320/277/H215 mm -Weight: 25 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Price: per piece -Number: 1x available -Dimensions: 350/280/H205 mm -Weight: 30 kg

electric motor, three-phase motor -Power: 0.25 kW -Speed: 700 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Dimensions: 275/210/H160 mm -Weight: 11 kg

three-phase motor, electric motor -Manufacturer: Dietz, electric motor type DR 90L/4n -Power: 1.5 kW -Speed: 1720 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 325/240/H175 mm -Weight: 18 kg/pc.

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 28 x 80 mm -Design: B3 -Dimensions: 440/320/H270 mm -Weight: 60 kg

Electric motor, three-phase motor -Power: 0.59/0.74/0.95 kW -Speed: 925/1410/2820 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 360/278/H210 mm -Weight: 35 kg

Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Switching power supply, control, modem, power supply -Type: SNT 25 -Dimensions: 97/100/H36 mm -Weight: 0.35 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 24 x 50 mm -Construction: B34 -Flange: Ø 160 mm -Number: 3 motors available -Price: per piece -Dimensions: 350/246/H205 mm -Weight: 31 kg

three-phase motor, electric motor -Power: 1.5 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Flange: Ø 160 mm -Protection class: IP 54 -Dimensions: 330/255/H190 mm -Weight: 25 kg

Three-phase motor, electric motor -Power: 1.6 kW -Speed: 930 rpm -Shaft: Ø 22x70 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 2x available -Dimensions: 400/320/H260 mm -Weight each: 47 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 300/235/H181 mm -Weight: 16 kg

Electric motor, three-phase motor -Power: 0.15/0.22 kW -Speed: 690/1400 rpm -Shaft: Ø 18 mm -Wave length: 50 mm -Construction: B3 -Protection class: - -Dimensions: 295/225/H180 mm -Weight: 17 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 355/265/H250 mm -Weight: 28 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Design: B3 -Dimensions: 445/317/H260 mm -Weight: 60 kg

Gear motor, electric motor, three-phase motor, angular gear motor -Speed: 30 rpm -Power: 0.6 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 395/140/H200 -Weight: 12.9 kg

Electric motor, three-phase motor -Power: 0.125 kW -Speed: 1100 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 235/190/H160 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Speed: 44/88 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: 420/210/H220 mm -Weight: 26.3 kg

Gear motor, electric motor, electric gear motor -Speed: 115 rpm -Power: 0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 410/210/H195 mm -Weight: 19.5 kg

Gear motor, electric motor, electric gear motor -Speed: 28 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: 365/180/H175 mm -Weight: 13.3 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Max. Operating pressure: bar -Temperature range: up to 120 °C -without fan -Dimensions: 420/120/H650 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1500 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: - -Dimensions: 380/300/H250 mm -Weight: 38 kg

Electric motor, three-phase motor -Power: 0.125 kW -Speed: 900 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 5x available -Dimensions: 230/190/H160 mm -Weight: 10 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 2.7/4.0 kW -Speed: 950/1440 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: -Dimensions: 480/320/H270 mm -Weight: 78 kg

Electric motor, three-phase motor -Power: 4 kW -Speed: 1450 rpm -Shaft: Ø 32 mm -Construction: B3 -Protection class: - -Number: 1x available -Price: per piece -Dimensions: 430/360/H285 mm -Weight: 58 kg

Gear motor, electric motor -Speed: 66 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: -Dimensions: 445/210/H220 mm -Weight: 27 kg

Geared motor, electric motor, three-phase motor -Speed: 12 rpm -Power: 1.1 kW -Design: B3 angle -Hollow shaft diameter: Ø 35 mm (shaft Ø 35 mm) -Dimensions: 510/220/H300 mm -Weight: 33 kg

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Voltage: 500 volts -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

Electric motor, three-phase motor -Motor is for a husband grinder -Electric motor: with 2 shaft outputs -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 580/340/H260 mm -Weight: 75 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 1415 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 380/195/H275 mm -Weight: 27 kg

Brand Engine : Detroit Model : 12V 91 TI Power: 540 hp RPM : 1800 General condition: Running taken out with gearbox reference 20191 Options Flywheel housing Flywheel Governor Exhaust system Turbo Starter Panel Water Pump Weight (kg) 2300 Dimensions (cm) 230X120X160

Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type GDP 233 pole-changing -Power: 0.8/1.1 kW -Speed: 1410/2820 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 310/270/H210 mm -Weight: 25 kg

Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type FDR 80C/ 2 Q -Power: 1.5kw -Speed: 2850 rpm -Shaft: Ø 19 x 35 mm -Construction: B14 -Protection class: IP 54 -Number: 3x motors available -Price per piece -Dimensions: 275/210/H160 mm -Weight: 13.2 kg/pc.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Dierking, DC gear motor type SO GP 86-2L -Voltage: 160 V -Power: 300 watts -Speed: 3000/146 rpm / i = 20.5 : 1 -Shaft: Ø 16 x 30 mm -Dimensions: 320/160/H150 mm -Weight: 10.1 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

electric motor, three-phase motor -Manufacturer:Dietz, electric motor type FDR100LB/ 4 P -Power: 2.5 kW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 360/300/H250 mm -Weight: 30 kg

Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm -Weight: 10.5 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 198 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 5.5 kW -Shaft mount: Ø 32 mm -other sizes also available in stock -Number: 14 engines available -Price per piece -Weight: 87 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg