129,468 used machines on RESALE, but how to find them? Machine Search
New BIG BAG filling station The device is available immediately from stock. Technical data: -Weight: 320 kg -up to 1.5 qbm big bags can be used. -Foldable feet -With EXTRA large funnel to the trucks/excavators filling -Dimensions: 1520 x 1640 (L x W) mm Retracted height feet: 2560 mm Extended height feet: 3060 mm -Hopper opening: 1400 x 1100 mm Technical data sheet, see the images on offer.
The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...
New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT
Yanmar Diesel Generator Set 16 kVA - NEW + + E-Start - AVR - Water Cooled + + - - - - - Engine: - Manufacturer: Yanmar (Italy) - Model: 3TNV70 - 2 cylinders - Diesel - Water-cooled - Power: 22 hp - 872 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 16 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 130 x 70 cm - Weight: 485 kg - Consumption: 3.1 lt ...
Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 140 x 70 cm - Weight: 450 kg ...
Kohler Diesel Generator Set 11 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 16 hp - 954 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 10 / 11 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 16A socket - incl. hedging - Key start - Voltmeter - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engine temperature too high - Oil pressure too low - Battery voltage not i.O. - Tear from the V-belt - Overspeed / Underspeed - - - - - Other data: - Dimensions: 95 x 65 cm - Weight: 235 kg - Consumption: 2.5 ltr. / h (75%) - - - - - ...
Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...
Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet
Permanent Overbelt Magnetic Separator TYPE DMPM800 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite mag ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal range 2,500mm (customizable) Rising range 4,000mm (customizable) Angle in the bend freely infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x30mm T-40 Cleat - 300mm pitch 2-layer particularly transversely stable We always have va ...
Demo Machine Specifications: Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, External dimensions of the mill drum - Ø870 x 1120 mm, Distance between bearings - 1260 mm, Height of the drum axis - 860 mm, Operating capacity - 600 dm3, Weight of the machine - 641 kg, Installed power - 5.5 kW, Input voltage/frequency - 400V/50Hz, Connector - 32A; 400 V Milling time range - 1s... 99h59min, Mill installed on a steel frame, Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification: Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed) Dimensions of the packed machine - 1500 x 1800 x 1320 mm, Mill drum external dimensions - Ø870 x 1120 mm, ...
Key data: 250 KW, 313 kVA, 400 V
MODEL: EQ-D313250 ENGINE: Deutz BF6M1015C-LA G3A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 313(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3500kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Key data: 240 KW, 300 kVA, 400 V
GENERATOR ENGINE: Perkins 1506A-E88TAG5 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 300(kVA) / 240(kW) ENGINE POWER: 240(kW) CYLINDERS: 6 CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2150kg DIMENSIONS L/W/HEIGHT (MM): 310010001700 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wi ...
Key data: 1000 KW, 1250 kVA, 400 V
ENGINE: 4012-46TWG2A FREQUENCY (HZ): 50 POWER: 1250kVA / 1000(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 13025kg DIMENSIONS L/W/HEIGHT (MM): 640022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or individual ad ...
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-VP250200 GENERATOR ENGINE: Volvo Penta TAD734GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1950kg DIMENSIONS L/W/HEIGHT (MM): 260011001530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
Key data: 500 KW, 625 kVA, 400 V
ENGINE: Volvo Penta TWD1643GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 625(kVA) / 500(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3600kg DIMENSIONS L/W/HEIGHT (MM): 330014001950 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or ind ...
Key data: 400 KW, 500 kVA, 400 V
MODEL: EQ-VP500400 GENERATOR ENGINE: Volvo Penta TAD1345GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 500(kVA) / 400(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3400kg DIMENSIONS L/W/HEIGHT (MM): 320011501800 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
weight max.: 1600 kg Drive: Diesel motor: Deutz weight: 13,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long
Manufacturer: Diebels GbR recycling machines Cutting capacity: 30 ton Materials:-Aluminium (cylinder heads), brass (taps), copper, etc. Special features: work desk side folding Weight: 1100 kg Drive: 7,5 kw / 400 V Control: foot pedal
Te Koop: Flowmeter DN 80 Diessel, Hildesheim Type: IZI/80 article no. 418407
S07 - used approx. 20 m³ / 20,000 litres steel tank, double-walled, underground tank, fire-fighting water tank, water cistern. In good condition, double-walled steel tank, lying horizontally, underground storage tank, water tank, diesel fuel tank, heating oil tank. volume: approx. 20 m³ / 20.000 litres material: steel tank length: approx. 6.00 m diameter: approx. Ø 2.00 m weight: approx. 4,0 t Outer side with bituminous insulation or bitumen coating. Used storage container, emptied and professionally cleaned inside. According to the age traces of use are present. Lightest damage and small dents to the insulation due to the excavation process. The tank is fully functional. This steel tank can be used as a storage container for many different media. On demand we can also modify it as a fire-fighting water tank, just ask us. Price upon request. Transport c ...
New: MB 12 - SH | 1.2 Ton Mini Excavator | with Warranty Location: Poland | Availability: Pre-order Product Overview: We offer the MB 12 - S|H, a 1.2-ton mini excavator with a 1,000 operating hour warranty. Ideal for landscaping. Key Features: Operating weight: 1,200 kg Emission standard: EU Stage V Digging force: Arm: 3 kN / Bucket: 7 kN Dimensions: 2870 x 940 x 2280 mm Operator cabin: open Technical Specifications Engine: Co-op D192F Power: 7.6 kW / 10.3 HP at 3,000 rpm Torque: 25.5 Nm at 2,880 rpm Fuel consumption: 275–280 g/kWh Cooling: Air-cooled Fuel type: Diesel Number of cylinders: 1 Hydraulic System: Pump: Gear pump Flow rate: 18 L/min Valves: Permco Tianjin multi-way hydraulic valve Swing motor: LKC Travel motor: LKC Hydraulic hoses: Continental Hydraulic oil capacity: 13 L Max. working pressure: 160 ...
Diesel forklift 2.5-ton load capacity with a Kubota engine offers impressive performance and is super maneuverable, even in tight spaces. Thanks to its efficient fuel consumption and robust drive, it is ideal for flexible use in warehouses and confined work areas. Specifications: - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 60 L - Transmission: 1-1 Powershift - Load capacity: 2500 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 100 x 40 mm - Total weight: 3680 kg - Vehicle width: 1170 mm - Total length with fork: 3646 mm - Total length without fork: 2576 mm Powerful Kubota diesel engine - Compact design for tight applications - Environmentally friendly & efficient according to EU Stage V - Ideal for w ...
Diesel forklift with a load capacity of 3,000 kg and a Kubota engine offers impressive performance and manoeuvrability. It is ideal for tight warehouses and confined work areas, as it ensures low fuel consumption and high reliability. With its robust construction and strong pulling force, this forklift is perfect for versatile applications in different environments. We offer a wide range of electric, gas and four-wheel drive forklifts with load capacities from 1 to 10 tonnes. If you need any further information, please do not hesitate to contact us. Specifications: - Load capacity: 3,000 kg - Engine: Kubota 4-cylinder diesel engine - Lifting height: up to 4,500 mm - Steering: Hydrostatic - Travel speed: max. 20 km/h - Tyres: pneumatic tyres, front: 6.00-9, rear: 6.00-9 - Total weight: approx. 4,800 kg - Tilt angle: 6° Tyres: - Front tire: 6.00-9 (pneumatic tire) - ...
Diesel forklift with a load capacity of 3,500 kg offers impressive performance and manoeuvrability, ideal for warehouses and tight work areas. With a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it ensures efficient fuel consumption and high tractive force. We also offer electric forklifts, gas forklifts and four-wheel drive forklifts in various capacities and options, including chassis adjustment, double telescopic mast and an ergonomic cab for comfortable operation. - Load capacity: 3500 kg - Emission standards: EU Stage V, EPA Tier 4 - Engine: Kubota V2607-CR-EW03 - Power: 38 kW / 50.9 hp at 2200 rpm - Torque: 174.1 Nm at 1500 rpm - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Max. lifting height: 3000 mm (standard fork) - Fork dimensions: 1070 x 125 x 45 mm - Total weight: 4700 kg - Vehicle width: 1225 mm - ...
This rugged diesel forklift with a load capacity of 4,000 kg (8,818 lbs) is the perfect choice for demanding applications in tight storage areas. Equipped with a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it offers excellent manoeuvrability and energy efficiency. In addition, we also have electric, gas and four-wheel drive forklifts in various designs and options such as chassis adjustment, double telescopic mast and ergonomic cab to meet all your special requirements. - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Load capacity: 4000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 130 x 50 mm - Total weight: 5310 kg - Vehicle width: 1410 mm ...
Diesel forklift 5.0 tons (5,000 kg, 11,023 lbs) is perfect for intensive use in large warehouses and when lifting heavy loads. Equipped with a powerful four-cylinder engine, hydrostatic steering, pneumatic tyres and a high-lift mast, it ensures fast and efficient transport of goods. In addition, we also offer electric forklifts that enable emission-free work in confined spaces, gas forklifts for balanced performance in various applications, and four-wheel drive forklifts that are ideal for outdoor use. Features: - Load capacity: 5000 kg - Engine: Cummins F3.8 - Power: 55 kW / 73.7 hp at 2500 rpm - Torque: 400 Nm at 1300 rpm - Displacement: 3.8 liters - Fuel tank: 140 liters - Emission standards: EU Stage V / EPA Tier 4 - Transmission: 2-2 Powershift - Maximum lifting height: 3000 mm (with standard fork) - Fork dimensions: 1220 x 150 x 55 mm - Total weight: 8160 kg - Vehi ...
Diesel forklift with a load capacity of 6,000 kg (6,000 kg, 13,228 lbs) offers reliable performance, even with heavy loads and challenging working conditions. Thanks to the hydrostatic steering, pneumatic tyres, high-lift equipment and dual-circuit braking systems, the truck remains manoeuvrable and safe even under extreme loads. If you're looking for a more environmentally friendly alternative, we also have electric forklifts for zero-emission operations, gas forklifts for greater flexibility, and four-wheel drive forklifts that are ideal for rugged use on construction sites and rough terrain. Specifications: - Engine: Cummins F3.8 - Power: 55 kW (73.7 hp) at 2500 rpm - Torque: 400 Nm at 1300 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 6000 kg - Max. lifting height (standard fork) ...
Powerful forklift for demanding journeys with 7.0T to lifting capacity (7,000 kg, 15,432 lbs). Cummins diesel direct injection, hydrostatic steering, pneumatic tyres, tilt. Ideal for lifting up and tilting! Also available in electric for zero-emission transport, in gas for medium distances, in transports and in all-wheel drive for difficult off-road models. Specifications: - Load capacity: 7000 kg; - Engine: Cummins F3.8; - Power: 55 kW / 73.7 hp at 2500 rpm; - Torque: 400 Nm at 1300 rpm; - Displacement: 3.8 l; - Fuel tank: 140 liters; - Emission standards: EU Stage V / EPA Stage 4; - Transmission: 2-2 Powershift; - Maximum height of the construction: 3000 mm ; Fork dimensions: 1220 x 150 x 70 mm; - Vehicle width: 1995 mm; Overall length: 4800 mm – with fork / 3580 mm – without fork; Control: steering wheel and precise joystick; - Tires: front: 8.25-14-14PR, rear: 8.1 ...
Diesel Forklift Capacity 8.0 T (8,000 kg, 17,637 lbs) is just the right thing for real heavy work. A powerful Cummins diesel engine, hydrostatic steering, pneumatic tires and rough terrain stabilizers ensure maximum comfort and efficiency, especially with heavy loads. In addition to diesel forklift trucks, Jungheinrich also offers electric forklifts for a clean and emission-free solution, gas forklifts for versatile use and all-wheel drive forklifts for universal use in multi-vehicle depots. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 8000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 150 x 75 mm - Total weight: 9850 kg - Vehicle width: 1995 mm - ...
The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg ...
Toyota, Forklift Diesel BJ 2018 Toyota 40-8FD40N , 4.5 to / 4500 kg Payload 1.Hand, bought from us New, available now just look at it on site Full view duplex mast 4000mm, with lateral shift and fork positioner, Manufacturer Meyer, forks/tine length 1200mm approx. 11,500 BH / operating hours, 408FD40N10563 Year of manufacture 2018 Comfort cab, heating Mini lever for quick and easy operation, Switch on the left of the steering column for changing direction of travel On-board computer including load weight display Comfortable Grammer seat wide fenders and 300mm wide pneumatic tires also suitable Price VHB Diesel forklift type 40-8FD40N with SAS system for active stability Basic load capacity 4500 kg Load center 500 mm Mast type full clearance duplex Lifting height approx. 4000 mm Overall height approx. 2990 mm Free ...
McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.
McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).
Used pressure filter for diatomaceous earth, Diemme, type FA 10. Filtration area 10m2. New 1986. Stainless steel.
DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...
DETROIT DIESEL 8V 71 TI 380 HP - 2100 RPM Listing ID 20093 Make DETROIT Model 8V 71 TI - 24V STARTER - Serial No. Cylinders 8 V / Inline V Power 380 HP RPM 2100 RPM General Info Condition: Runner Application: Marine Weight (kg): 1300 KG Cooling : Water Cooled WITH EXPANSION TANK Dimension 150 x 120 x 140
DETROIT DIESEL 6 71 TI 485 HP - 2500 RPM Listing ID 20095 Make DETROIT Model 6-71ti - 24V STARTER - Serial No. 6A 0474626 Cylinders 6 V / Inline INLINE Power 485 HP RPM 2500 RPM MAX RPM 2700 General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / WATER COOLED TURBO / HEAT EXCHANGER Turbo WET Dimension 130 X 100 X 120
DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...
DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20096 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry
DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20097 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry
Electric motor, three-phase motor -Manufacturer: Dietz, electric motor type DR 71 b / 2p -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 240/180 / H140 mm -Weight: 8 kg
ID NO 20109 MARINE DIESEL ENGINE Reference number 20109 Brand DETROIT Model 12V71 Power 382 HP RPM 1800 MAX RPM 1950 Serial number 12VA 085003 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 30 Flywheel INCLUDED Governor Exhaust system WET Turbo NONE Cooling system HEAT EXCHANGER Starter INCLUDED Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO PANEL Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) APPROX 2500 KG
maximum number of results exceeded
please refine your search
