127,361 used machines on RESALE, but how to find them? Machine Search
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer
Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer; New
Star Ball Mill, Rotor Ball Mill, Centrifugal Ball Mill, Centrifugal Ball Mill Used. Manufacturer: EHINGER IMPIANTI Type: RM 150 Achievable grain sizes: with dynamic classifier: 0-20 μ and 0-300 μ with static selector 0-2 mm Average continuous output approx. 1.6 t of glass per hour Motor SIEMENS 75 kW 738 rpm 400 V Dimensions approx. 2850 x 4100 x 5000 mm original matching dust filter with fan The mill pictured serves only as a sample. The mill for sale is currently being revised. These mills are now being built by Eirich as an OrbitMill for the fine grinding of industrial minerals. Performance data of the Orbit Mill according to the manufacturer as an example of limestone. Air flow rate 13000 m³/h Limestone Throughput d97= 20 μm : 1.6 t/h d97= 40 μm : 3.3 t/h d97= 105 μm : 6.0 t/h The mill pictured was used in glass recycling. Four balls, which a ...
Rotary table (lazy Susan) all stainless steel turn table new diameter 1.250 mm adjustable height 825 – 855 mm safety guard (height 10 mm) 1 speed (3 rpm) 0,12 kW
Rotary vane vacuum pump Manufacturer: Leybold Type: Sogevac SV280 Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
Rated power up to 600 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (three-phase) Electrical fuse 16 A Laenge 2080 mm width 1030 mm He 1450 mm Juice pan in 1.4301 / AISI 304 Pressing force 24 to Press pressure 380 bar Juice yield up to 75% connection for juice drain 30mm High juice drain 400 mm Supplied scope of delivery 80x80cm, 20 pressing inserts made of acacia wood 50x50xcm ; New machine - best condition
Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition
Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use
Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use
used
VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.
Buhler rotary discharge valve type MPS 22/13, reviewed, with ball bearings, partially with new bearings. Rectangular inlet 130/10, I/U 2, gap 0.05 (2 x), 0.10 (2 x), 0.15 (1 x), 0, 2 (1 x), d = 35. We have used rotary valves in all sizes and of many various types. Just ask! Our technicians will gladly advise you.
Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0063F Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation
Drehschieber-vacuum pump Manufacturer: Leybold Type: Sogevacs SV280 Status: used, tested! The maintenance for the unit is sold separately! Including: oil filling Delivery time: In stock!; ready for operation
Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: E2M28, E2M18 Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation
Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation
Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation
Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation
Rotary vane vacuum pumps lubricated Manufacturer: Becker Type: U5. 100 Suction power: 100 m ³/h Discharge pressure: 0.1 mbar (abs.) Including: Gasbalast, oil filter Status: Demo Warranty: 12 months Delivery time: In stock; ready for operation
Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0016C. Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation
Rotary vane vacuum pumps dry manufacturer: Becker type: VT 4.40 Condition: Rebuilt Voltage 400V DS suction capacity. 40 m³/h warranty: 12 months delivery time: in stock More pumps on request!; ready for operation
Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 8 and RV 5 Motor: 230V Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation
Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation
Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 250 d Status: Demo Warranty: 12 months Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation
Rotary vane vacuum pump manufacturer: Becker Type: U4. 630 SA/K o F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15KW status: used, tested! The General overhaul for the device will be sold separately! Including: oil, vacuum suction filter Delivery time: In stock!; ready for operation
Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: small 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation
Rotary vacuum pumps sliding & lubricated Number: 5 PCs Status: Rebuilt Warranty: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60 Hz 400V Motor power: 4KW Nominal: 160m ³/h Discharge pressure: 0,5hpa(mbar) Includes: user manual, parts list Delivery time: In stock; ready for operation
Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock
Rotary vane compressor manufacturer: Becker Type: VT4. 25 Voltage: 400V/50 Hz Warranty: 12 months Status: Rebuilt and new painted Pressure capacity: 25 m ³/h Discharge pressure: Max + 1 bar (rel) Accessories: owner's manual; ready for operation
new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW
Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation
The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.
Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg
Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg
The fan speed is refurbished, can be supplied as a complete unit.
Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar
Capacity: 150 l/min Motor: 1,5 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg
used
Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes
Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg
Connection: 1 x DN 25, DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 1,5 kW Capacity: 150 l/min. Pressure: 2 bar Measurements and Weight: Length: 1330 mm Width: 520 mm Height: 860 mm
Connection: 1 x DN 25, DN 50 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 11 kW Capacity: 20m3/h Pressure: 8 bar Measurements and Weight: Length: 930 mm Width: 580 mm Height: 1030 mm
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
Connection: 1 x DN 40 , DN 40 (on request the connections can be changed) - mobile chassis - with cable and CE plug Motor: 3,0 kW Capacity: 170l/min Pressure: 2 bar Measurements and Weight: Length: 1000 mm Width: 370 mm Height: 700 mm
The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.
A generally overhauled blower type GMb 039 is offered.
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GMA 12.6 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.
A refurbished rotary piston blower brand is offered: Aerzener Maschinenfabrik Type: GM 30 L All our blowers are overhauled and equipped with new bearings and sealing elements. If you have any questions, please call.
maximum number of results exceeded
please refine your search
