rotary 500 used for sale

pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x

pressure:500 t distance between columns:1220 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1600 x 1200 mm pressure of drawing cushion in table:320 t stroke of drawing cushion in table:150 mm drawing cushion surface in table:750 x 625 mm pressure of drawing cushion in ram:180 t stroke of drawing cushion in ram:100 mm drawing cushion area in ram:750 x 625 mm ram surface:1600 x 1200 mm table height over floor:800 mm speed down:665 mm/s speed up:530 mm/s working speed:34 - 100 mm/s quantity of oil:2000 l power requirement:180,0 kW weight:40,0 t Dimensions (WxDxH):3,2 x 2,4 x 7,5 m Depth of foundation pit:4,1 m Height above floor:5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

pressure:500 t distance between columns:1910 mm stroke:500 mm Distance table/ram, max. stroke up, adjustment up:700 mm table surfache without cutting impact cushions:1910 x 1360 mm table surfache with cutting impact cushions:1600 x 1360 mm table height over floor:800 mm ram surface:1600 x 1270 mm Side window:600 mm speed down:400 mm/s speed up:330 mm/s working speed:10 - 28 mm/s oil volume:1200 l power requirement:60,0 kW weight:40,0 t Dimensions (WxDxH):3,6 x 2,5 x 5,0 m height over floor:4,5 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic

pressure:500 t stroke:fix 300 mm no. of strokes:20 - 70 Hub/min distance between columns:3100 mm side window:1400 mm distance table/ram, max. stroke up, adjustment up:1000 mm Table area:2800 x 1600 mm ram surface:2800 x 1450 mm ram adjustment:100 mm power requirement:90,0 kW weight:100,0 t Dimensions (WxDxH):5,75 x 3,2 x 7,8 m height above floor:6,4 m height beneath floor:1,4 m clutch:pneumatic; Ortlinghaus ram adjustment:motoric overload protection in ram:hydraulic ram counterbalance:pneumatic

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Pure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems. Pure steam production: adjustable (operating range stated) up to 8 bar. Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam. DiscountDistillation ...

General SKU360S873 LocationBarneveld MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel Information Year of construction2011 Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsRubberPlastic & rubberMinerals & inorganicPlastic & polymersOther chemicalStarchGeneric medicinesPowdered foodsConsumer wasteVibro sievesTren ...

General SKU288N443 MakeConstructiebedrijf Verkouille No.A9673 Year of construction1997 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket8 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactorcheck Capacity5000 Ltr Vessel sizesdia.1700mm x2200mm Dished bottomcheck Dished top sidecheck Manholedia.500mm, dia.200mm Top connections(2x)dia.100mm, dia.80mm, dia.25mm Outletdia.80mm Half coil jacketedcheck With paddle stirrercheck Motor2,2 KW, 230/400 Volt (EExd II) Information LocationBarneveld Floorspace2,0x1,8 M Total height+/- 4,5 M Weight3250 KGCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsRubberAPI ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGCatalysts & fillersF ...

General SKU253N183 LocationBarneveld MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic liftingcheck (3,6 kW) MaterialStainless steel Information Year of construction1986 With switchgearcheck (as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPlanetary mixersOther chemicalFine chemicalsOintmentsPaints & coatings ...

General SKU274P408 LocationBarneveld MakeHellmich Behälter- und Apparatebau (DE) No.4973 Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4541 (321) Stainless Steel Reactors Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm Information Year of construction1998 Mounted on legscheck Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgCatalysts & fillersFeed additivesPaper & otherSolventsStainless Steel ReactorsDetergen ...

General SKU040Z169 MakeHaagen & Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorcheck In-line homogeniser Rotor sizesø 150 x 150 mm Inlet120 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m3/h With mechanical sealcheck Motor22,0 KW, 400 Volt With frequency controllercheck Rotor speed2900 rpm MaterialStainless steel 1.4306 (304L) Information With switchcheck With switchgearcheck Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg CEcheck Extra Specifications- mirror polished rotor and stator - stator with mechanical seal DiscountInline high shear mixersHaagen & RinauDiscountMixers > Inline high shear mixersBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer MaterialStainless steel 1.4404 (316L) Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgCatalysts & fillersFeed additivesPaper & otherConical dryersOther pha ...

Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg   

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Manufacturer: MUSTANG (Made in Europe) Model: RH 20 Serial Number: AH250805 Year of construction: 2026 Equipment Type: Hydraulic Demolition Shear/Pulverizer (Heavy Duty) Model RH 20 Weight 1,800 kg Year of construction 2026 Working pressure 300 bar Rotary printing 70 bar Oil requirements 200 l/min Rotational Oil Requirement 30 l/min Manufacturer Mustang Main circuit: 200 l/min at 300 bar Rotator (360° rotation function): 30 l/min at 70 bar Excavator class approx. 18–25 tons Auction-ID: 04D-BP3-2

Lightbox, single-sided HINRICHS FOTOFACTORY 500 x 500 mm ( 500x500mm ) max. foil size: 480 x 480 mm 230 V AC 50 Hz 32 W used, aluminium housing, tested ! Dimensions: 500 x 85 x 500 mm

Strip cylinder NORGREN M/446040/M/500 stroke 500 mm piston diameter Ø 40 mm 10 bar used ! Dimensions: 800 x 75 x 90 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 500 x 500 mm height: 120 mm used ! Dimensions: 500 x 500 x 120 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Worktop, Straightening Plate, Measuring Plate,Spotting Plate PAGUS Work surface: 500 x 500 mm Height: 40 mm used, tested ! Dimensions: 520 x 500 x 40 mm

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Material: steel Engine: 7,5 kW Weight: 8500 kg Length x Width x Height: 7500 mm x 2000 mm x 3000 mm With working platform Turning pipe: 44 U/min Length 5950 mm, diameter 1700 mm; two draft. Very good condition, overhauled. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm

; very good

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

; see pictures

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.