138,294 used machines on RESALE, but how to find them? Machine Search
clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5000 mm high: 2185 mm weight of the machine ca.: 0,98 t dimensions: 1,72 x 0,8 x 2,2 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 kN stroke: 40 mm throat: 73 mm Working height from to: 60 - 150 mm table surface area: 115 x 70 mm weight of the machine ca.: 10 Kg .Toggle lever hand press SPECIAL OFFER! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 1170 x 580 x 580 mm operating pressure: 2,2 - 8,0 bar dimensions: 1,22 x 0,93 x 1,70 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 690 mm table load: 0,5/0,25 t swivelling range: 0 - 90 motorisch Grad turning speeds: 0,2 - 2,5 U/min spindle bore: 100 mm Torque: 375 Nm welding current: 500 Ampere connected load frequency: 230 Volt weight: 290 kg Dimensions (LxWxH): 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 855 mm table width: 500 mm stroke height: 900 mm : 340 mm weight max. in kg: 500 kg weight of the machine ca.: 0,085 t : 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring length: bis 5000 mm Tube length: 5280 mm numbers of toolholders: 6 : Rohr Edelstahl dimensions: 5,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 550 mm table load: 500 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlos table load capacity: 250 kg. vertikal total power requirement: 0,8 kW weight of the machine ca.: 245 Kg dimensions of the machine ca.: 820 x 730 x 710 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impact length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 172 kg length in width: 620 mm length in total: 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller conveyor length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 140 kg length in width: 620 mm length in total: 5000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FRYER, TS TECHNIEK BV, MODEL: HOF-5000x600 Technical description: Serial number: 200939-00124 Power supply: 400 V, 3 Ph, 50 Hz, 3 kW Mesh widht: 600 mm - (Stainless steel) Dimensions: 5000 x 1800 x 2300 mm With internal heating coil
Key data: 5000 kN
Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h
Key data: 630 mm, 620 mm, 710 mm
ÖKK HP 500S CNC Horizontal Machining Center CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Travel Z-axis: 710 mm Table Indexing 0.001° Spindle Heads MAS BBT40 Spindle speed 100 - 12,000 1/min Spindle drive 11/7.5 kW Number in Stacks: 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock. We are selling this machine at a special price, called "as seen". This means that we do not check the condition of the machine.
Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.
Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...
Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display, Screen diameter: 500 mm, Enlargement: 50 and 100 times, Swivel range of the upper table: +/- 2 mm, Connected load approx.: 230 V / 50 Hz, Dimensions W x D x H approx.: 1200 x 700 x 1800 mm, Weight approx.: 400 kg, colour: Light grey
Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Speed or High Accuracy | - Specifications: stainless steel (SS304) version | filling range: 10-5000g, accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 50-200, ...
Basic Automatic Linear Auger Filler with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: Hopper volume: 45 liter | filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 40 cycles/minute | power: 380V, 1.6kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 di ...
Basic Automatic DUAL Linear Auger Filler (two filling stations) with weight feedback via separate weigher. Including free flow device for better product flow control and including dustproof cover. SIEMENS PLC controlled with SIEMENS Touch Screen. - Specifications: hopper volume: 85 liter | Filling weight: 10-5.000g | stainless steel version with servo motor | packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-550g), 0-0.5% (at 500g and more) (depending on product and total weight) | max. speed of the machine in neutral: 80 cycles/minute | power: 380V, 3.2kW | compressed air: 0.05m?/min, 6bar | machine dimensions: L2000xW1000xH2100mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packag ...
Fully automatic powder filling system, single auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. - Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% | suitable for: metal cans, glass bottles, plastic jar, paper bags, etc. | container dimensions: diameter 40-80, height 60-180mm with different can feeding screws | max. speed of the machine in neutral: 60 cycles/min | power: 220V, 1.6kW | machine dimensions: L1450xW1230xH1800mm | weight: 190kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new p ...
Semi-automatic auger filler for 100-5000g. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres | filling weight: 10-5000g (change of dosing screws required) | stainless steel version AISI 304 | servo motor | packaging accuracy: 1-2% (depending on product and total weight) | max. speed of the machine in neutral: 50/minute | current: 1.5kW, 3P, 380V | machine dimensions: L600xW800xH1000mm | weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainles ...
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for cus ...
Stand-alone Auger Filler with weight feedback via load cell. PLC controlled with Touch Screen. Hopper volume: 50 liter. Filling weight: 10-5000g. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover.- Specifications: packing accuracy: 0-1.5% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 40 cycles/minute | power: 220V, 1.4kW | machine dimensions: L1150xW1000xH2100mm | weight: 200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized ...
Stand-alone Auger Filler with weight feedback via connected weigher. PLC controlled with Touch Screen. Preset programming possible. Hopper volume: 25 liter. Filling weight: 10-500g. Extension of filling range to 5-600g possible when second dosing screw is added. Built-in filling head height adjuster and weighing cells guarantee accuracy by means of permanent control and automatic correction of dosage. Stainless steel version with servo motor. - Including: Level Split hopper for easier cleaning, Filling head height adjuster, Free Flow Device for better control of product flow and including Dustproof Cover. - Specifications: packing accuracy: 0-2% (at 0-100g), 0-1% (at 100-500g), 0-0.5% (at 500g and more) (depending on product and total weight). Packaging speed 50 cycles/minute | power: 220V, 0.95kW | machine dimensions: L800xW790xH1900mm | weight: 130kg. Please note that our new prices ar ...
Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 5000kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 5000kg/h | power: 380V, 5.5kW | hopper diameter: 650mm | discharge diameter: 420mm | height of vacuum pump: 1800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possibl ...
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 10-5000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.25kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 3-500g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vibration Feeder (volume ca. 500 l), infeed container for product with vibrating mechnism to supply product to infeed conveyor, stainless steel, L1600xW880xH1100mm, 250/300kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
NNP 500L Tumbler Stainless, 500L tumbler, in caged frame, safety guards, with discharge door, 3Ph
Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg
Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm
Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²
used
Tränklein banding machine ZW-D 500, with cardboard device, machine number 2967, year of construction 1986, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Iobr Sbsvvirij Ta Ejau You are welcome to visit the machine in our house by prior appointment.
Used piston press for apple juice production made by Bucher, model: HP 5000, capacity 5 t / h. New: 1985. 2 pieces available for general renovation (hydraulics) or for parts. Control cabinet available for 1 press.
Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
Max. X-axis stroke730 mm Max. Y-axis stroke730 mm Max. Z-axis stroke880 mm Max. workpiece diameter800 mm Max. workpiece height1,000 mm Max. workpiece weight700 kg Control & software SIEMENS
Marel concept 500 labelling machine, - top and bottom labelling machine
Technical data of the pallet rack stand: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 3720 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,500 mm high 1,100 mm deep Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
grinding diameter: 140 -1260 mm grinding length: 5000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 800 x 80 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 35000 kg spindle drive: 30 kW grinding wheel turining speeds: 720 - 1800 U/min feeds of grinding head: 60 - 4000 mm/min grinding feed: 0,0125 mm/U working spindle drive: 45 kW work piece spindle speed: 240 - 2400 U/min total power requirement: - kW weight of the machine ca.: - t 2008 Electrical Upgrade Computer Controlled Allen Bradley Powerflex Digital Drives Allen Bradley 1606-XL Power Supply N-Tron 508 XT Ethernet Card Allen Bradley Panelview Plus 1250 Digital Readouts Allen Bradley PLC CompactLogix L32E - Crowning and Cambering Capabilities - Stationary Rotating Roll with Travelling Grinding Carriage - 2 Steadies - Servo Drives: Headstock & Grinding Wheel, - Rapid Traverse C ...
CONVEYOR BELT, Sturdy steel construction,, belt width 450 mm,, total length 8 500 mm,, inclination change 45°,, PVC belt L450mm, with applied trapezoidal guides,, corrugated edges, H50 mm and flights H50 mm L250mm,, idler roller diam.219,, outlet 500x150mm,, side rails,, 0.75 kw gear motor, rust-proof+enamel paint
Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph
Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C
Used packaging machine made by Hugart, type: DS 5000. Capacity 5000 pcs / h. New: 2013.
A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
