rotary 500 used for sale

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Key data: 500 mm, 400 mm, 300 mm

Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

Inv. Num. : 7637 Type: Robot 500 Produzent: Vemag Erzeugt: Parametern: Portionsgewicht: 5-30.000 g Kapazität: 2800 kg/h

Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

Used Used labeller Newtec 6.500 bph: Year: 2010 Condition: As Is EA 636 | LABELLER NEWTEC Year: 2010 Speed: 6.500 Bph Direction: Clockwise Number of heads: 6 Number of stations: 2 Type of application: Front Back Bottle formats: Bordolese from 500g to 1,5Lt Safety protections Code: EA 636 More details: https://bottlingscout.com

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Gluingmachine for paper, Width: 500 mm, Options: for PVA glue, floorstand model

faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

turning diameter: / mm turning length: / mm workpiece length: / mm Drum brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

height of stroke: 3300 mm fork length: 2000 mm weight max.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10000 kg length: 5000 mm width: 2000 mm loading area height: 700 mm Heavy-Duty Trailers - Industrial Trailers - Available immediately from stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height 1850 mm Width 950 mm Length 2650 mm Capacity 500 l Power supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless steel, acid-resistant Stirrer Type Spiral Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer

Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Dimensions: see photos -Dimensions: 270/110/40 mm -Weight: 2.1 kg

Original Danfoss frequency converter 1,5 kW 2,2 kW and many more

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STROMAB pneumatic cut-off machine mod. TR 500 – CE standards – used - With 4000mm TIGERSTOP electronic positioning stop - Table with 4500mm infeed rollers - Table with 4500mm outfeed rollers - Blade diam. 500 - Maximum cutting capacity: 360 mm (L) to 60 mm (H) 135 mm (H) to 280 mm (W) - 10 hp motor - 415 volts - Matr. 1377 - Year 2007

Transnorm belt conveyor GF 3990-700-600 RA2069 Technical data: Conveyor length (NL): 3990 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3990 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: ...

Transnorm Rising falling Incline belt conveyor GF 7750-600-500 RA2054 Technical data: Conveyor length (NL): 7750 mm (4150 mm + 3600 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4BMG Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7750 Nominal / outs ...

Lippert belt conveyor GF 3220-650-500 RA1466 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3220 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 20 ...

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.