rotary 500 used for sale

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Load hook, retractable safety device, load securing device -Load securing device: Type 16 -Load capacity: 500 kg -Rope length: 6.7 m -Note: not for persons -Dimensions: 720/240/140 mm -Own weight: 12.8 kg

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

Manometer, test manometer, saw tension gauge -Manometer: Saw tension gauge -Type: 0 to 5000 kgs/cm² -Mounting: see photos, bore Ø 16 mm -Dimensions: 70/60/H160 mm -Weight: 1.0 kg

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...

roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block -Roller conveyor: non-driven, length 1.65 m on solid base frame, height adjustable -Roll width: 500 mm -Roll diameter: 80 mm -Roller spacing: 230 mm -Transport dimensions: 1480/720/H1020 mm -Weight: 134 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg

Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 1115 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 90 kg

Square, locksmithsquare, hair square, precision hair square -Angle stop: Leg length 510 x 250 mm -Dimensions: 510/250/H40 mm -Weight: 2.3 kg

Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...

Transnorm conveyor belt GF 2300-600-500 RA2057 Technical data: Conveyor length (NL): 2300 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2300 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentral ...

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 500 mm -Quantity: 4x flat angles available -Price: per piece -Dimensions: 1000/500/H9 mm -Weight: 5.3 kg/pc.

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Lippert belt conveyor GF 22000-650-500 RA1361 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Length (NL): 22.000 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT 80 N4 MM07 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum (AT): Ø = 81 mm Belt return roller: Ø = 50 mm Belt type: NNT 10 ENBU year of construction: 2001 Optional accessor ...

Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 -Pipe size: 1/4 to 1 -built-in cutting jaws: 1 -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cubes: heavy-duty version, 4 pieces -Length: 500 mm -Material: Steel -Submission/Price: complete -Dimensions: 500/120/H160 mm each -Transport dimensions: 500/480/H160 mm -Weight: 207 kg

Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Defle ...

Lippert belt conveyor GF 1710-650-500 RA1370 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1710 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed: adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.07 / 0.37 S1 Deflection roller: Ø = 34 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally available: Suppo ...

-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg -Lifting speeds: 1/3 m/min -Lifting height: 6 m -Double strand

Lippert belt conveyor GF 1285-650-500 RA1378 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1285 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection drum: Ø = 64 mm Drive drum: Ø = 81 mm Belt type: SNB 8 E year of construction: 2001 Optionally ...

Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 200 ...

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile racking system -Width: 1300 mm -Depth: 500 mm -Height: 1520 mm -Quantity: 2 available Price: per piece -Weight: 40 kg/piece

Stage lights, spotlights, lamps, searchlights -Ultralite Quadro-500 -Technical data: -Power supply: 15/230 V 50/60 Hz -Lamp: GY9.5 500 W -Weight: 3 kg -Average operating distance: 4-10 m -Swivel range: 45°-45° -Beam angle: Min/Max 8°-37°

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MCV 600 -Width: 500 mm -Length: 500 mm -with supporting ribs -with Span Index -Weight: 115 kg

Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 ...

Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Be ...

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (U ...

Lippert belt conveyor flap belt GF 970-650-500 RA1465 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 970 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construc ...

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2000 mm -Number: 4x stands -Price: complete -without: crossbeams -Weight: 50 kg

Lippert belt conveyor GF10250-650-500 RA1394 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 10.250 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converter up and down Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT 10 ENBU Year of manufacture. 2001 Op ...

Lippert belt conveyor GF 780-650-500 RA1444 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 200 ...

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg

Concrete bucket, concrete bomb, concrete silo -Concrete bomb: for concreting by crane -Contents: 500 liters -Crane slings -Dimensions: Ø 1100 x 1700 mm -Empty weight: 200 kg

Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Features: Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

Data sheet Retrofit Pos. Tr 015 TRANSNORM strap foerers 800-600-500 Type TRANSNORM TS 1100 Laenge strap foerers 800 mm Total width 600 mm Strap width 500 mm Strap type E 8/2 gruen Drive station COMPACT Drive drum motor Type: TM 113 B25-434 Z, FU preprepared Power: 0.25 kW Voltage: 230/400 V, 50 Hz conveying speed 1.02 m/s Stuetzen without hustle and craps, please request if necessary Functional, visually good condition Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: Van der Graaf Trommelmotor KW: 0,25/S1 Ampere: 0,71 Conveyor speed m / s: 1,02 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ih ...

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg

curved belt 60° right Transnorm TS1500-80 Built in 2007 Direction: right Width: 500 mm Inner radius: 600 mm with guiding systems inside and out Drive location: outside pulling constant speed v = 0.75 m/sec. incl. 3 supports Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 0,75 scope of delivery: including side guides, including support with three feet Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralo ...

Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 9827 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach m ...

Transnorm conveyor belt GF 19480-600-500 RA2107 Technical data: Conveyor length (NL): 19480 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 19480 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...