rotar used for sale

Rotary table, rotatable and swivelling WMW Ø 450 mm swivel 360° x 90° groove width: 14 / 25 mm Foot size: 400 x 500 mm used ! Dimensions: 860 x 800 x 400 mm

Rotary Actuator, Actuator, 90° Rotary Actuator BERNARD ASP 25 ( ASP25 ) 150 Nm 0,0,0,0 25 rpm 0.03 KW 400 V Hollow shaft: Ø 20 mm Flange diameter: Ø 125 mm New ! Dimensions: 470 x 340 x 320 mm

Rotary table DSZ MKA 250 Ø 250 mm table height: 115 mm groove width: 14 / 20 mm Dimensions: 340 x 410 x 150 mm

Rotary Actuator AUMA SAR 10.1-G0 Speed: 22 rpm Closing torque ( min / max ): 60-120 Nm Opening torque ( min / max): 60-120 Nm Hollow shaft: hexagonal profile, wrench size 32 mm Motor: VD 71-2/35 0,0,0,020 Nm/35br /0,020 37 kW 2800 rpm 380 V 3AC 50 Hz IP 67 New ! Dimensions: 550 x 280 x 310 mm

Rotary table with 4 jaw chucks PAGUS diameter: Ø 160 mm table height: 160 mm lathe chuck 360° rotatable ( manual, without gearbox ) with 15° detent ( small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

Round Sectioning Table, Rotary Table WMW (SEMPUCO Greiz) RmM 315 - 3007 Ø 315 mm Table height: 155 mm Groove size: 14 / 24 mm Dimensions: 625 x 490 x 155 mm

Rotary table STANKO 720440023 Ø 400 mm Table height: 160 mm used, tested ! Dimensions: 500 x 600 x 160 mm

Rotary table PAGUS Ø 300mm used, tested ! Dimensions: 60 x 60 x 25 cm

Rotary union for coolant DEUBLIN 1139-022-301 295910 X0603 max 140 bar max 28 l/min max 30,000 rpm New ! Dimensions: 150 x 65 x 65 mm

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

Hammer drill, drilling machine HILTI TE 54 ( TE54 ) drilling capacity steel: 13 mm drilling capacity concrete: 52 mm 230 / 480 rpm 900 W 230 V with case Dimensions: 600 x 400 x 140 mm

Round Sectioning Table, Rotary Table, Circular Dividing Table PAGUS Ø 250 mm Table height: 98 mm Groove width: 14 / 25 mm Groove depth: 23 mm used ! Dimensions: 400 x 350 x 100 mm

Rotary table PAGUS Ø 800 mm Table height: 160 mm 4 grooves: 50 mm Dimensions: Drm. 930 x 470 mm

Used rotary bottle rinsing machine from Italian company Poggio, model FM24. New 2007.

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Offer 17230 Specifications: - Load capacity 3600 kg - Face plate diameter approx. 1050 x 1050 mm - Face Plate mot. swivel + swivel - Face plate speed electr. infinitely variable 0.2 - 1 rpm -Mot. Right - + Left - Run - Handheld remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Handheld remote control

Offer 24037 Specifications: - Max. load capacity 150 kg - Face plate diameter 800 - min. table height in horizontal position approx. 600 mm - Max. table height in horizontal position approx. 1100 mm - Face plate hydraulically infinitely variable swivel or tilt - Right + counterclockwise rotation of the face plate - Rotary movement electr. hydt. adjustable - Welding current transmission approx. 500 A - Drive 400 V - Connected load approx. 0.75 kW - Space requirement approx. W 1700 x H 1450 x D 1000 mm - Weight approx. 900 kg

Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

• overhauled • suitable for installation in a folding box cartoner type C 2205 • 2-fold arm

• Single rotary press • 36 punching stations • Upper-lower punch EU-B (diam. 19 mm), die EU-BB (diam. 24 mm) • Pressing/pre-pressing force max. 80/10 kN • Tablet diam. max. 13 mm • Filling depth max. 19 mm • Output max. 264,000 tablets/h • Keyed turret (lower and upper punch) • Forced feeder • Filling funnel nozzle present, filling funnel not present • Stainless steel Design • Without tabletting tools • HMI Courtoy multi-control • PLC B+R NT 44 • Drive 400V/50Hz This machine is being offered at a special price and is being sold as is without a technical inspection.

Welding Rotator SARAZIN type HD 100 - No 2 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

Voltage: 220V/380V, frequency: 50Hz, power: 250W, cycle rate: 3600 cycles/h. On-site inspection is possible.

Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.

An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for ...

Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible.

rotary table diameter: 800 mm grinding height: 1200 mm grinding head - power requirement: kW total power requirement: 30 kW weight of the machine ca.: 8500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible.

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mm table load: x t table height: x mm spindle diameter: 0 mm x-travel: 500 mm y-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 10-STATION HORIZONTAL AXIS ROTARY TABLE, - bar max. Ø 60 mm;, - workpiece length max. 220 mm., - barr length max. 6.000 mm

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two almost identical rotary indexing tables are available, 1x TT315-04-270-RH-20-3 KA57 DRN100L4-M2A and 1x TT315-04-270-RH-20-1 KA57 DRN100L4-M5B, diameter output flange: 360mm, overall height (screw-on surface output flange) 243.5, center diameter: 90mm, max. recommended mounting plate size Ø: 2800mm, weight of output flange: 193kg, load on output flange axial force: 32kN, radial force: 17kNm, tilting moment: 5kNm. mounting plate size Ø: 2800mm, rotary table weight: 193kg, load output flange axial force: 32kN, radial force: 17kN, tilting moment: 5kNm, load center column axial force: 28kN, tilting moment: 4kNm, accuracies partial accuracy: ±22mm, axial runout at output flange: ±0.01mm, radial runout at output flange: ±0.01mm. With documentation, on-site inspection is possible.

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml | number of filling heads: 6 | max. number of machine cycles in neutral: 26 cycles/min | current: 220/380V, 2.5kW | air pressure and consumption: 5-7bar, 0.7m? | machine dimensions LxWxH: 2600x1630x1900mm | weight: 1600kg. Please note that our new prices are o ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has two filling heads for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 500ml | number of filling heads: 2 | max. number of machine cycles in neutral: 16 cycles/min (corresponds to max. 33 bags/min) | current: 220V, 1.5kW | air pressure and consumption: 5-7bar, 0.65m? | machine dimensions LxWxH: 1990x1300x1980mm | weight: 1500kg. Please note that our new prices are ofte ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages ...

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable f ...

Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouches and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable  ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Techn ...

Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(100-350)xW(100-210)mm. - Techn ...

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Rotary cultivator Pellenc Tournesol TS 1000 LD, three-point rear attachment, tool Rotary cultivator with 2 movable cutter blades on the boom (manual length adjustment approx. +/- 25 cm), hydraulic drive by means of 540 rpm push-on PTO pump, hydraulic lifting (1 x hydraulic connection ew required). Support and evasion function can be adjusted several times, solid sliding shoe (approx. 60 kg). Year of manufacture 2014, used. Manufacturer's specs: For tractors 50 hp, hydraulics 30-40 ltr. /min. at 180 bar, working speed max. 5 km/h, vine width min. 2.20 m.

Slitter rewinder for artificial leather or textiles Width 160cm

Leather splitting machine Camoga C 520 L with 50cm working width

Kiefel Roller Sheeter

Stock number: SF018, Rotation filter, stainless steel,, Fratelli Gianazza type 15020., Double jacket., Rotation, for kieselguhr., Ø 500 mm, 5,6 m²., Material: Stainless steel AISI 304