ropp cap used for sale

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-06 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 6 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 36 mm - Functional length - 70 mm - Body diameter - 17 mm - Length body diameter - 4 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.113 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-10 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 10 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 10 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 45 mm - Functional length - 70 mm - Body diameter - 27 mm - Length body diameter - 4 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 10 Nm - Tool design - steel - Mass (weight) - 2.207 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on milling arbor holder, quantity = 1 piece ISO: C8-391.05C-22 030M Product data: - Machine direction adapter interface -Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 22 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 4: axially concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 22 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 30 mm - Body diameter - 80 mm - Length body diameter - 30 mm - Torque - 45 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 1.86 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-12 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 12 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 12 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 48 mm - Functional length - 70 mm - Body diameter - 32 mm - Length body diameter - 5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.3 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.20-14 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 14 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 14 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 48 mm - Functional length - 70 mm - Body diameter - 34 mm - Length body diameter - 5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.315 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on milling arbor holder, quantity = 1 piece ISO: C8-391.05C-27 030M Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 27 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 4: axially concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 27 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 30 mm - Body diameter - 80 mm - Length body diameter - 30 mm - Torque - 80 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 1.91 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 1 piece ISO: C8-391.19-12 090 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 10 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 12 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 90 mm - Body diameter - 24 mm - Length body diameter - 50.2 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.151 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto on shrink chuck, quantity = 1 piece ISO: C8-391.19-25 100 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (shrink fit) -metric: 25 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Functional length - 95 mm - Body diameter - 33 mm - Length body diameter - 56.5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Tool design - steel - Mass (weight) - 2.5 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - ISO 9766, quantity = 1 piece ISO: C8-391.27-32 090 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 32 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 32 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 61.5 mm - Functional length - 90 mm - Body diameter - 52 mm - Length body diameter - 53.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 30 Nm - Tool design - steel - Mass (weight) - 2.368 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.27-20 080 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 20 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 20 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 51.5 mm - Functional length - 80 mm - Body diameter - 36 mm - Length body diameter - 43.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.247 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity 1 piece ISO: C8-391.27-25 085 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 25 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 25 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 57.5 mm - Functional length - 85 mm - Body diameter - 45 mm - Length body diameter - 49.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 20 Nm - Tool design - steel - Mass (weight) - 2.315 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - Weldon, quantity = 1 piece ISO: C8-391.27-16 080 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Cylindrical clamping (ISO9766 drill shank) -metric: 16 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 16 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 49.5 mm - Functional length - 80 mm - Body diameter - 36 mm - Length body diameter - 42 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 12 Nm - Tool design - steel - Mass (weight) - 2.24 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Adapter Coromant Capto - ISO 9766, quantity = 1 piece ISO: C8-391.27-40 095 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Facing adjustment - Weldon -metric - 32 - Code for coolant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Recording diameter - 80 mm - Recording diameter, workpiece side - 40 mm - Angle position of holder, workpiece side - 0 deg - Clamping length - 71.5 mm - Functional length - 95 mm - Body diameter - 65 mm - Length body diameter - 62.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 1/min - Torque - 40 Nm - Tool design - steel - Mass (weight) - 2.649 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Description: Coromant Capto - CoroChuck 970, quantity = 1 piece ISO: 970-C8-40-161 Product data: - Tapping range, max. - M30 - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Fastening type cutting plate - S: clamp with screw through hole - Facing adjustment - ER collet (DIN6499-B) for tapping -ER40 - Code for cooling lubricant supply - 3: axial concentric and radial entry - Cooling lubricant outlet - 1: axial concentric exit - Coolant pressure - 80 bar - Recording diameter - 80 mm - Recording diameter, workpiece side - 40.8 mm - Functional diameter - 40 - 55 mm - Functional length - 143.7 mm - Length body diameter 1 (LB1) - 125.1 mm - Length body diameter 1 (LB2) - 155.1 mm - Speed, max. (-81, -82: Maximum speed) - 8,000 1/min - Mass (weight) - 3.448 kg Approx. Onsite Dimension. (l x w x h): 300 x 200 x 100 mm, weight approx.: 5 kg

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

7 pcs. Index VD30 mounts with Capto interface, 3 pcs. powered by it, mint condition!

Used Simonazzi Europa Isobaric Monoblock 48 8 8 Suitable for the production of beer sparkling wine soft drinks both carbonated and non carbonated and mineral water in glass containers with a height of 130mm to 350 mm The monobloc is composed of a filling carousel of 48 Simonazzi Eurostar model taps with completely new pre evacuation vacuum self levelling and relative snift the bell rods are electropolished for perfect sliding and a very long life Flling system of Used Simonazzi Europa Isobaric Monoblock The sniff is equipped with a double seal to use the taps for both carbonated and non carbonated There is a vacuum pump with a water cooled ring The filling bell is tested for 7 Bar of pressure and is internally mirror electropolished with an internal inclination for maximum sanitization The 48 pistons are completely new in stainless steel and also the sliding bars and bearings are new and ...

M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

Horizontal batch mixer with 630 l. gross capacity, pneumatically operated discharge gate (new cylinder), 37 kW drive, Flender gearbox (N2 = 58,58 RPM) and hard metal plated mixing tools. Refurbished in 2016, very good condition.

Built 1985, tank with weighing equipment in special steel, capactiy: 800 l, tank on 3 weighing cells, max. pressure: 6 bar.

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

FORMAT 76x100 cm for the production of folders (CD)Hullen, etc. Estro unit for capacitive folders (3D) Hot glue with 2 dues very good condition Option with Fidia Vetta folder locking unit (MHGraphics is Fidia-dealer) This price includes transport, installation and instruction (3 days) in Germany/Austria/Switzerland/France/Belgium/Niederlaende/Scandinavisin/ Poland. New price Euro 185.000 Available: immediately/Imm.

Silo 8 m3, capacity 8 m3, outlet flap NW 250

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Y.O.M. 1985, Pneumatic pressure conveying vessel for operating pressure 1 bar with 600 l usable capacity in normal steel., With built-in container scale BW3 for 250 kg/batch, shake, swivel valve, rotary valve DK 4 /200, load cell and ventilation. Without control cabinet.

Make: KSB Model: KRR-EX-200-500 Capacity: 90m3/hr Built: 2001 Pump height: 25m Engine power: 30KW DN 200 The pump is designed for water and sludge and has an open impeller!

Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Pneumatic conveyor (working pressure: 1 bar) with 600 l capacity in mild steel. With inbuilt bin-type scale BW3 (250 kg/batch), slide, swivel slider, rotary-vane feeder DK 4/200, weighing cell and ventilation., Without electrical switchgear cabinet.

Make: KSB Model: Krr-EX-200-500 Capacity: 90m3/hr Built: 2000 Pump height: 19m DN 200 The pump is designed for water or sludge, with open impeller! Originally, a 30KW engine was installed.

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

This is a portioning plant for the bakery industry The machine is made entirely of stainless steel. It has a conveyor belt table special for strand bread plants. Funnel capacity:180kg (Teflon coated). The weight of, This machine is variably available and can be designed according to your wishes. The machine is variable in height and also size of the dough pieces, etc. Optionally also tritt n Mehstreuer can be ordered.

Kat-No 10-1271 New Container capacity: approx. 15 litres Batch size: 3-10 litres Material: stainless steel V2A 1.4301 Frame construction: mobile Double coat Insulated 3 bar Homogenizer 5.5 kW 500-3000 RPM Agitator 0.5 kW 30 RPM Scraper stirrer 0.18 kW adjustable 10-45 UPM Automatic vacuum control 0.55 kW Lid can be folded manually Display of product temperature Template container left 3 litres for powder components Template container on the right 3 litres for liquid components The price is valid for a process system. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share ...

This is a portioning plant for the bakery industry the dough hopper has a capacity of 180kg (teflon-coated) the system consists entirely of stainless steel at the same time is still a height conveyor attached to the teigli, but the system is also variably available according to your wishes and ideas whether other dough size or other, or no conveying height

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.

Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...