rolls royce used for sale

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   FACCIN - 3 HEL 3134 3 roll plate bender 3000 x 25 mm MACH - ID 6329 Make: FACCIN Type: 3 HEL 3134 YOP: 2009 Rolling width      3.000 mm Rolling thickness 3 x toproll Ø    20 mm Rolling thickness 5x toproll Ø     25 mm Rolling thickness prebending      18 mm Top Roll Ø     340 mm Side roll Ø     300 mm Number of rolls    3 Rolling speed      0 - 5 m/min Adjustiment lower roll      200 mm Power      20 kW Dimensions Length      5.000 mm Width       2.000 mm Height      2.100 mm Weight     13.000 kg

Bread rolls Stüpfler stainless steel 380 volts -30 in part

Used head machine GULLIVER, type: IRIS 20 -In bakery condition- For square buns or ciabatta - Machine in stainless steel - NEW tapes - 3 cutting rollers - Stepless adjustment of the cutting length (length section) - Inlet and outlet belt high folding - 2x flouring - Display swivel Sightseeing and test run are possible by arrangement.

Sheet thickness: 4,00 mm Bending length: 250 mm Number of rolls: 3   ROUNDO - PM-0 Quick rolling machine 250 x 4 mm MACH - ID 6320 Make: ROUNDO Type: PM-0 YOP: 1995 Rolling width    250 mm Rolling thickness 3  x toproll Ø4 mm Rolling thickness 5  x toproll Ø5 mm Top Roll Ø    100 mm Bottom Roll Ø  40 mm Number of rolls    3 Rolling speed     2/4 m/min Power      3.9 kW Dimensions Length      1.000 mm Width        1.900 mm Height       1.800 mm Weight       800 kg

Sheet thickness: 25,00 mm Bending length: 2500 mm Number of rolls: 3   ROUNDO - PS 360 3 roll plate bender 2500 x 30 mm MACH - ID 6293 Make: ROUNDO Type: PS 360 YOP: 1978 Rolling width    2.500 mm Rolling thickness 3x toproll Ø     25 mm Rolling thickness 5x toproll Ø     30 mm Rolling thickness prebending      20 mm Top Roll Ø     360 mm Side roll Ø      340 mm Number of rolls       3 Rolling speed       0-5 m/min Power       30 kW Dimensions Length       4.500 mm Width         2.200 mm Height        2.400 mm Weight       20.000 kg

Head machine TTW Bavaria dough part and actuator -Head machine Bavaria -Model 512 -5 rows

Used bread bun system KÖNIG, type: ECO 4000 -In bakery condition- For kaiser buns and round rolls. - Head machine Classic Rex T5S, with 5 rows - Roller: SK58 - Pre-fermentation cabinet, type: ECO 4000 - with SIEMENS SIMATIC control -Weight range: 35 - 85g - Power: max. 5,100 pcs./h - for Kaisersemmel Sightseeing and test run are possible by arrangement. More information on request. Intermediate sale reserved.

Sheet thickness: 16,00 mm Bending length: 2100 mm Number of rolls: 4   AKYAPAK - AHSY 270 x 2100 Hydraulic 4 roll plate bender 2100 x 16 mm MACH - ID 6289 Make: AKYAPAK Type: AHSY 270 x 2100 YOP: 2008 Rolling width    2.100 mm Rolling thickness 3x toproll Ø     16 mm Rolling thickness 5x toproll Ø     20 mm Rolling thickness prebending      13 mm Top Roll Ø     270 mm Bottom Roll Ø       250 mm Side roll Ø       210 mm Number of rolls     4 Rolling speed       1-6 m/min Power     11 kW Dimensions Length    4.800 mm Width     1.800 mm Height    1.800 mm Weight    7.000 kg

Bread machine for square special rolls Model: Quadro Fit incl. 3 longitudinal cutting rollers Ribbon flourer for inlet belt LED control, Stainless steel Machine mobile with fixed Connection 400V, 16ACEE plug Used machine is cleaned and workshop tested Come to our bakery machinery warehouse!

Lippelt Rustica Mini angular bun -with 3 cutting rollers -with humidification and seed sprinkle -Year of construction 2000

Sheet thickness: 10,00 mm Bending length: 4000 mm Number of rolls: 3   FACCIN - 3 HCD 4028 3 roll plate bender 4000 x 10 mm MACH - ID 6276 Make: FACCIN Type: 3 HCD 4028 YOP: 2004 Rolling width    4.000 mm Rolling thickness 3 x toproll Ø  8 mm Rolling thickness 5x toproll Ø   10 mm Rolling thickness prebending   7 mm Top Roll Ø    285 mm Side roll Ø    265 mm Number of rolls    3 Rolling speed    5 m/min Control    Digital Read Out Number of driven rolls    3 Power 15 kW

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

Used bread maker / head machine for square rolls LIPPELT, type: Mini Rustika -Overhaul- - Head machine / dough divider for rustic rolls - with punching device - 3 different cutting rollers - with seed station with humidification on top and bottom - New tapes - Condition: Very good - Warranty: 6 months The head machine is in very good condition and is ready for immediate use. Sightseeing and test run are possible by arrangement.

Sheet thickness: 70,00 mm Bending length: 3000 mm Number of rolls: 3   PULLMAX KUMLA - SALI 3000 - 50 3 roll plate bender 3000 x 70 mm MACH - ID 6249 Make: PULLMAX KUMLA Type: SALI 3000 - 50 Rolling width    3.000 mm Rolling thickness 3x toproll Ø   60 mm Rolling thickness 5x toproll  Ø  70 mm Rolling thickness prebending      50 mm Top Roll Ø   650 + 450 mm Bottom Roll Ø      650 mm Number of rolls    3 Rolling speed      0 - 4 m/min Number of driven rolls        2 Power      73,6 kW Dimensions Length      10.500 mm Width          4.000 mm Height         3.000 mm Weight        155.000 kg

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id      6024 MAKE           Faccin Italia TYPE             HCI 3050 - 25/20 YOP               1991 SPECIFICATIONS Rolling width        3050 mm Rolling thickness   3   x toproll Ø20 mm Rolling thickness 5    x toproll Ø25 mm Rolling thickness prebending        20 mm Top Roll Ø      400 mm Side roll Ø      350 mm Number of rolls        3 Rolling speed          6 m/min Adjustiment lower ro        ll0 - 200 mm/min. Power          25 kW DIMENSIONS Length      & ...

Dough part and actuator, Bread press Model: 4-30 NEW mature technology ... the original! Knife with simple cleaning position! Dough divider semi-automatic with 3 actuating plates Dough ring coated with easy click Sub range 40 to 120 grams/piece Division 30 in part Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Sheet thickness: 150,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id     5563 MAKE          Haeusler TYPE           VRM-HY YOP             1990 / 2000 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø     120 mm Rolling thickness 5x toproll Ø      150 mm Rolling thickness prebending       100 mm Top Roll Ø          910 + 820 + 740 mm Bottom Roll  Ø    940 mm Side roll Ø           780 mm Number of rolls    4 Rolling speed        2 + 4 m/min Adjustiment lower roll        200 mm/min. Adjustment side rolls    &nbs ...

spare parts - dimter application with 2 rollers Glue with 2 glue rolls 270 mm; guide from above; Aggregate not yet overdone, behaelter can be found;

Sheet thickness: 17,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id    5354 MAKE          Biko TYPE           3 HCD 3031 YOP             1996 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø    17 mm Rolling thickness 5x toproll Ø     13 mm Rolling thickness prebending      10 mm Top Roll Ø         315 mm Bottom Roll Ø       295 mm Number of rolls     3 Rolling speed         0-6 m/min Control         Conventionel Number of driven rolls        3 Power          15 kW DIMENSIONS Length  &nb ...

Bread rolls impacting machine Frilado 2 row -2 row roll-punching machine -mobile on wheels

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   MACH-id    1784 MAKE         Haeusler TYPE           VRM HY YOP             2000 SPECIFICATIONS Rolling width       4000 mm Rolling thickness 3  x toproll Ø      60 mm Rolling thickness 5   x toproll Ø     50 mm Rolling thickness prebending       40 mm Top Roll Ø       710 mm Bottom Roll Ø        640 mm Side roll Ø      520 mm Number of rolls          4 Rolling speed      1/4/6/8 m/min Top support         Yes Side supports       Yes Number of driven rolls  ...

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: HAEUSLER MACH-id       5424 MAKE           Haeusler Swiss TYPE             VRM - HY YOP               2001 SPECIFICATIONS Rolling width        3100 mm Rolling thickness 3  x toproll Ø     45 mm Rolling thickness 5x toproll  Ø       60 mm Rolling thickness prebending        40 mm Top Roll Ø       570 + 430 mm Bottom Roll Ø     540 mm Side roll Ø      420 mm Number of rolls      4 Rolling speed       2/4/6 m/min Control        HAEUSLER  ...

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 3   MACH-id    5393 MAKE         AKYAPAK TYPE          ASM-S YOP            1999 SPECIFICATIONS Rolling width        2000 mm Rolling thickness 3  x toproll Ø       6 mm Rolling thickness 5  x top roll Ø      8 mm Rolling thickness prebending       4 mm Top Roll Ø       170 mm Bottom Roll  Ø  170 mm Side roll  Ø        150 mm Number of rolls     3 Rolling speed 4,8 m/min Power        4 kW DIMENSIONS Length       4000 mm Width         1300 mm Height        1 ...

Bread roll Frilado -S 200 new -Total condition of the machine is very good -400 volts -2.5 A -50 Hz

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id    5337 MAKE         Roundo Sweden TYPE           PAS 650 YOP             1991 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic          3 or 4 roll       4 roll Maximum sheet thickness       65 mm Bending length       3000 mm Max. Rolling capacity Ø 2.500       60 mm Max. Prebending capacity Ø 2.500        50 mm Top Roll Ø       650 mm Bottom Roll Ø     650 mm Side Rolls Ø      530 mm Working speed M/Min.    5 M/min. DIMENSIONS Length       7000 ...

Sheet thickness: 10,00 mm Bending length: 2000 mm Number of rolls: 4   MACH-id     5331 MAKE          AKYAPAK TYPE             AHS / 4 YOP                2008 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical        Hydraulic 3 or 4 roll        4 roll Maximum sheet thickness         10 mm Bending length        2100 mm Max. Rolling capacity Ø 2.500         10 mm Max. Prebending capacity Ø 2.500     8 mm Top Roll Ø       210 mm Bottom Roll Ø      190 mm Side Rolls Ø         170 mm Working speed M/Min.4 M/min. DIMENSIONS  ...

gebr. Roll press Fortuna fully automatic size 3, overhauled, for angular rolls, with 3 work plates, newly painted, 30-piece, weight of the dough pieces: 32 – 70 g, dough insert approx. 960 – 2100 g, 147 cm high, 69 cm wide, 80 cm deep, weight: 540 kg

SM74 - Damp friction cylinders - Chrome coated rollers - 2 x wet wet wipers are sold - suitable for Vario - wetlands - Dimensions: Diameter: 62 mm x Length: 760 mm - completely re-coated with water-friendly - available - immediately

Sheet thickness: 3,00 mm Bending length: 1050 mm Number of rolls: 2   MACH-id    5315 MAKE         Faccin Italia TYPE           HCU 1050 x 3 YOP             2008 SPECIFICATIONS Controll          Manuel Hydraulic / Mechanical         Hydraulic 3 or 4 roll       2 roll Maximum sheet thickness            3 mm Bending length        1050 mm Top Roll Ø        100 mm Bottom Roll Ø       300 mm Working speed M/Min.         7 M/min. DIMENSIONS Length        2600 mm Width          1250 mm Height         1900 mm  ...

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Sheet thickness: 12,00 mm Bending length: 1500 mm Number of rolls: 4   MACH-id    5219 MAKE         Haeusler Swiss TYPE           VRM HY 1500 x 12 / 10 YOP              2002 SPECIFICATIONS Control         Conventionel Hydraulic / Mechanical      hydraulic 3 or 4 roll       4 roll Maximum sheet thickness        12 mm Bending length          1500 mm Max. Rolling capacity Ø 2.500       12 mm Max. Prebending capacity Ø 2.500        10 mm Top Roll Ø      220 mm Bottom Roll Ø     220 mm Side Rolls Ø       200 mm Working speed M/Min.4  M/min. DIMENSIONS Lengt ...

Sheet thickness: 42,00 mm Bending length: 2500 mm Number of rolls: 4   MACH-ID   5190 MAKE        DAVI TYPE          MCB 2543 YOP             1997 SPECIFICATIES Werking Hydraulisch / Mechanisch      Hydraulic 3 of 4 rollenwals        4 roll Plaatdikte= 42 mm Wals lengte      2500 mm Max. wals dikte bij product Ø 2.500      42 mm Max. aanbuiging bij product Ø 2.500      32 mm Boven rol diameter Ø     430 mm Onder rol diameter Ø        400 mm Zij rollen diameter Ø         360 mm Werk snelheid in M/Min.       2-4 M/min. AFMETINGEN Lengte        5000 mm Breedte      &nbs ...

Sheet thickness: 3,00 mm Bending length: 1500 mm Number of rolls: 3   MACH-id    5171 MAKE        Birlik TYPE         MSM YOP          2006 SPECIFICATIONS Control       Conventionel Hydraulic / Mechanical      Mechanical 3 or 4 roll       3 roll Maximum sheet thickness      3 mm Bending length       1500 mm Max. Rolling capacity Ø 2.500       3 mm Max. Prebending capacity Ø 2.500         2.5 mm Top Roll Ø     110 mm Bottom Roll Ø      110 mm Side Rolls Ø     110 mm DIMENSIONS Length        2400 mm Width       980 mm Height       1 ...

Sheet thickness: 100,00 mm Bending length: 600 mm Number of rolls: 3   MACH-id    5092 MAKE         Boldrini TYPE           PIR 600 x 100 YOP             1980 SPECIFICATIONS Hydraulic / Mechanical        Hydraulic 3 or 4 roll        3 roll Bending length         600 mm Max. Rolling capacity Ø 2.500        100 mm Max. Prebending capacity Ø 2.500        70 mm Top Roll Ø       500 mm Side Rolls Ø     350 mm Working speed M/Min.    2.5 + 4 M/min .DIMENSIONS Length         3500 mm Width          1700 mm Height          2500 mm

Sheet thickness: 2,00 mm Bending length: 1020 mm Number of rolls: 3   MACH-id   5016 MAKE        Huvema Holland TYPE          HU 1020 x 2 YOP             2011 SPECIFICATIONS Hydraulic / Mechanical         Mechanical 3 or 4 roll      3 roll Bending length        1020 mm Max. Rolling capacity Ø 2.500        2  mm Top Roll Ø75 mmBottom Roll Ø  75 mm Side Rolls Ø    75 mm Power      0,75 kW DIMENSIONS Length       1600 mm Width         1000 mm Height         1200 mm  

Sheet thickness: 4,00 mm Bending length: 1250 mm Number of rolls: 2   MACH-id    5013 MAKE         Faccin Italia TYPE           HCU YOP            1990 SPECIFICATIONS Hydraulic / Mechanical     Hydraulic 3 or 4 roll         2 roll Bending length          1250 mm Max. Rolling capacity Ø 2.500        4 mm Top Roll Ø     165 mm Bottom Roll Ø     305 mm Power       6 kW Working speed M/Min.     5 M/min. DIMENSIONS Length        3500 mm Width          1300 mm Height         2200 mm

Sheet thickness: 4,5 mm Bending length: 1540 mm Number of rolls: 3   MACH-id    5011 MAKE         NOSSTEC LUNA Sweden TYPE           8266 15/45 YOP              1997 SPECIFICATIONS Hydraulic / Mechanical     Mechanical 3 or 4 roll        3 roll Bending length         1540 mm Max. Rolling capacity Ø 2.500     4.5 mm Max. Prebending capacity Ø 2.500      3.5 mm Top Roll Ø     120 mm Bottom Roll Ø      120 mm Side Rolls Ø        120 mm Power        1,1 kW DIMENSIONS Length       2100 mm Width         1000 mm Height        1200 mm  ...

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Smart Pro MACH-id    4117 MAKE       DAVI PROMAU Italia TYPE         MCA 2017 YEAR        2009 SPECIFICATIONS Controll         SMART PRO Hydraulic / Mechanical        Hydraulic 3 or 4 roll         4 roll Maximum sheet thickness        6 mm Bending length     2000 mm Max. Rolling capacity Ø 2.500    6 mm Max. Prebending capacity Ø 2.500     5 mm Top Roll Ø    170 mm Bottom Roll Ø   160 mm Side Rolls Ø       160 mm Power      5.5 Hp  kW    Working speed M/Min.     ...

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id   4022 MAKE        Haeusler Swiss TYPE          VRM - HY YEAR          SPECIFICATIONS      Hydraulic / Mechanical    Hydraulic 3 or 4 roll   4 roll Maximum sheet thickness    30 mm Bending length     3000 mm        Max. Rolling capacity Ø 2.500      25 mm Max. Prebending capacity Ø 2.500      20 mm Top Roll   Ø    420 mm Bottom Roll Ø   400 mm Side Rolls Ø    340 mm

Sheet thickness: 3,00 mm Bending length: 1550 mm Number of rolls: 2   CNC Brand: Siemens CNC Model: Simatic Panel MACH-id    3994 MAKE        Lisse France TYPE          B 155 . 30 YEAR         1997 SPECIFICATIONS Controll     Siemens Simatic Panel Hydraulic / Mechanical    Hydraulic 3 or 4 roll      2 Maximum sheet thickness    3 mm Bending length      1550 mm Max. Rolling capacity Ø    2.500   3 mm Max. Prebending capacity Ø 2.500   3 mm Top Roll Ø   120 mm Bottom Roll Ø   300 mm

Sheet thickness: 13,0 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Smart Pro MACH-id   3608 MAKE   DAVI - Promau TYPE     MCB 3028 YEAR    2007 SPECIFICATIONS Controll   Smart - Pro Hydraulic / Mechanical    Hydraulic    3 or 4 roll  4 roll Maximum sheet thickness13 mm Bending length   3100 mm Max. Rolling capacity Ø 2.500  13 mm Max. Prebending capacity Ø 2.500  10 mm Top Roll Ø   280 mm Bottom Roll Ø  260 mm Side Rolls Ø  260 mm Power   15 Hp kW DIMENSIONS Length   5000 mm Width   1500 mm Height   1800 mm Davi mcb 3028  4 roll platebending machine  

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  18mm Top Roll Ø:                    430 + 300 mm Bottom Roll Ø:                 430mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:    & ...

Sheet thickness: 14,0 mm Bending length: 2100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Bend iT 7 Axis Touchscreen Bend iT Cone bending device Hardned rolls (Hrc 58) Force lower roll to upper roll 70 Ton New over EUR 100.000 Rolling width:                 2.100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    260mm Bottom Roll Ø:                 250mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 0 - 8 m/min Number of dri ...

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

Sheet thickness: 50,00 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: DAVI EASY Rolling width:                 3100mm Rolling thickness 3x toproll Ø:40mm Rolling thickness 5x toproll Ø:50mm Rolling thickness prebending:  40mm Top Roll Ø:                    530mm Bottom Roll Ø:                 470mm Side roll Ø:                   400mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        0 - 200mm/min. Adjustment side rolls:         0 - 200mm/min. Top support:  ...

sheet width: 1550 mm plate thickness: 6,5 mm pre-bending: 4,5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2,2 + 1,5 kW weight of the machine ca.: 2.370 kg. range L-W-H: 3.300 x 1.200 x 1.300 mm Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 190 mm side roll diameter: 150 mm diameter of lower rolls: 170 mm total power requirement: 3,0 kW weight of the machine ca.: 3.290 kg. dimensions of the machine ca.: 4042 x 1380 x 1254 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 13,0 mm ST pre-bending: 10,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 11,0 kW weight of the machine ca.: 16.000 kg. dimensions of the machine ca.: 6542 x 1677 x 1900 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 16,0 mm ST pre-bending: 20,0 mm ST diameter of upper rolls: 360 mm side roll diameter: 250 mm diameter of lower rolls: 330 mm total power requirement: 15,0 kW weight of the machine ca.: 13.200 kg. dimensions of the machine ca.: 5542 x 2100 x 1983 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 7,5 kW weight of the machine ca.: 9.930 kg. dimensions of the machine ca.: 6532 x 1730 x 1489 mm Furnishing: - hydraulic 4 roll bending machine - Conical bending device, hydr. adjustable - Induction hardened rollers - Digital display for the two side rollers - mobile control panel - 2 speeds - hydraulic folding bearing - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.