rolls bending used for sale

Key data: 1000 mm, 1 mm

with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm

P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Used machine in good condition. Available for immediate delivery.

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg

Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm

Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg

Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm

Working width 100mm. Auction-ID: A1-45188-85

Auction-ID: A1-45188-238

Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm

Used machine in good condition. Available for immediate delivery.

Auction-ID: A1-45188-30

In and including steel tray Auction-ID: A1-45188-219

Auction-ID: A1-45188-90

Auction-ID: A1-45188-36

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm

with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 55 t - Bending length: 2.050 mm - Axes: 8 - Working area: 200 - 1.770 mm - Distance between uprights: 2.100 mm - Returning speed: 180 mm/seg - Frame type: O-frame - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 5.000 kg - Dimensions (long x wide x high): 3.388 x 2.385 x 2.555 mm

Working width 100mm.

Including rack with various bending rollers

Horizontal and vertical Horizontal and Vertical Axis Ø 85 mm Number of rolls 3 Stroke X-axis 200 mm Moment of resistance 37 CM³ Capacity Down 80 x 15 x R = 800 mm Tube capacity 76 x 3.6 x R = 600 Ø x mm Capacity solid 45 x 45 x R = 600 mm T-profile capacity 8-0 x 8-0 x R = 800 mm Working speed 0 - 7000 mm/min.

machine ready for transport and to be assessed on viewing day

in wooden box

Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg

WILA Table - Stroke max: 200 mm - Working area: 3.100 mm - Pressure force: 160 t - Bending length: 3.100 mm - Axes: 6 - Working speed: 10 mm/seg - Control: CYBELEC ModEva 10S - Weight: 10.500 kg

Used machine in good condition. Available for immediate delivery. - Table width L -R: 200 mm - Operating hours: pending - Pressure force: 400 t - Bending length: 6.000 mm - Axes: X-R-Z1-Z2-X - Working area: 0 mm - Distance between uprights: 5.050 mm - Working speed: 11 mm/seg - Returning speed: 120 mm/seg - Throat: 400 mm - Stroke max: 300 mm - Oil tank capacity: 500 l - Power: installed max: 42 kW - Weight: 37.000 kg - Dimensions (long x wide x high): 0 mm

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T

chamfer lenght: 3050 - 4020 mm 2 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Wire diameter between 3-8 mm

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending Device, Round Bending Device PAGUS Bending Diameter: Ø 41, 55, 58, 84 mm Jaw Height: 50 mm Step Insert: Ø 87/75 mm Fastening in Vise ! Dimensions: 760 x 200 x 200 mm

Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg

- Working area pipe steel  up to 30 mm x 2 mm - Pipe working area stainless steel  up to 30 mm x 1.5 mm - Pipe extension length 2,000 mm - Bending angle up to 180° + 10° overbending - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Input PC with software Transpro V2 + Tanspro V2 package (indication of previous owner) - Function triggering via hand switch - Clockwise bending direction - Radius range max. 125 mm mm -Auto. Mandrel lubrication - Laser scanner for security area - Incl. existing used tool for stainless steel pipe 1 mm  15, 18, 22, 28 mm Bending radius 1.5 D (various wrinkle smoothers, mandrels