rolling used for sale

Sheet thickness: 18,00 mm Bending length: 2000 mm Number of rolls: 4   CNC Brand: Siemens Rolling width:                 2000mm Rolling thickness 3x toproll Ø:18mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending:  16mm Top Roll Ø:                    270mm Bottom Roll Ø:                 250mm Side roll Ø:                   250mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        0 - 200mm/min. Adjustment side rolls:         0 - 200mm/min. Power:             ...

Sheet thickness: 8,00 mm Bending length: 1050 mm Number of rolls: 4   Rolling width:                 1.050mm Rolling thickness 3x toproll Ø:8mm Rolling thickness 5x toproll Ø:10mm Rolling thickness prebending:  8mm Top Roll Ø:                    170mm Bottom Roll Ø:                 170mm Side roll Ø:                   145mm Number of rolls:               4 Number of driven rolls:        2 Power:                         2,2 kW Length:                        2.550 mm  Width:      ...

Sheet thickness: 10,00 mm Bending length: 4000 mm Number of rolls: 3   3 roll driven Digital read out Rolling width:                 4.000mm Rolling thickness 3x toproll Ø:9mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  7mm Top Roll Ø:                    285mm Side roll Ø:                   265mm Number of rolls:               3 Power:                         14kW Length:                        6.200 mm  Width:                         1.600 mm  Height:  ...

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

Sheet thickness: 7,00 mm Bending length: 1000 mm Number of rolls: 1   Max plate thickness : 7 mm Min. rolling diameter : 760 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width        1,000 mm Rolling thickness prebending       7 mm Number of rolls     1 Number of driven rolls       1 Power     2.4 kW

Sheet thickness: 6,00 mm Bending length: 1000 mm Number of rolls: 1   MACH - ID 6112 Make:ROUNDO Type:PM 22 YOP:2007 Max plate thickness : 6 mm Min. rolling diameter : 160 Max. rolling diameter : 600 Top Shaft diameter : 110 Lower rolls diameter : 120 Max. bending power : 350.000 N Rolling width   1,250 mm Rolling thickness prebending      6 mm Number of rolls      1 Number of driven rolls    1 Power       5.4 kW

4 ROLL HYDRAULIC MODEL M2008 EVO_4.0 CNC GRAPHIC CAD-CAM Machine serial number 2022 PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING Capacity -Width of plate: 2000 mm -Thickness of plate rolling 8 mm -Thickness of plate pre-bending 6 mm -top roll 190 mm -lower roll 170 mm minimum rolling shell ID 220 mm -Power 5,5 Hp to run the hydraulic unit Voltage 400/50 – 480/60 -Weight of the machine 3400 Kg Configuration installed Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling Dual pre-pinch, with adjustable force upon the input of plate thickness Conical bending hydraulic attachment - hardened contrast pad. Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. Calibration system f re-rolling of welded shells rounding. Console electric in ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

Description: Note: Roundo Type: PAS-460 Hydraulic: Yes Roller length: 4,200 mm Sheet thickness: 16 mm Number of rollers: 4 Diam. upper roller: ø480 mm Lower roller diameter: ø480 mm Side roller diameter: ø390 mm Bending capacity: 18 mm Powered rollers: 2 Hydraulic folding: Yes Hydraulic lifting: Yes Main motor power: 55 kW Bending capacity: 4200 x 14 - 18 mm Rolling capacity at diam. 1,500 mm: 4200 x 21 - 26 mm Rolling capacity at diam. 2,500 mm: 4200 x 25 - 31 mm Rolling capacity at diam. 3,500 mm: 4200 x 27 - 33 mm Rolling speed: max. 7 m/min Max lower roller load: 400 tons Max. load per roller: 200 tons with digital deflection weight approx.: 35,000 kg, Approx. Onsite Dimension. (l x w x h): 300 x 7,400 x 2,500 mm

Key data: 2 _Unknown / Other, 1000 Touch, 2

Sheet thickness: 2,00 mm Bending length: 1000 mm Number of rolls: 2   CNC Brand: _Unknown / Other CNC Model: Touch Rolling width:                 1.000mm Rolling thickness 3x toproll Ø:2mm Top Roll Ø:                    100mm Bottom Roll Ø:                 250mm Number of rolls:               2 Rolling speed:                 0 - 5 m/min Power:                         5.5kW Length:                        2.400 mm  Width:                         1.300 mm  He ...

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

The Unicompact rolling mill is used in the food industry or the chemical industry. For crushing, squeezing and grinding the product up to 4 Mohs. The rolling mill is currently used for crushing and crushing coffee beans. The rolling mill is still in operation and can be visited. The indicated price is EXW Wiesbaden, unpacked, excluding VAT.

MTP ESR 2020 X 3.5 E 3-roll plate rolling machine was built in 2020. The machine, designed to bend workpieces with a maximum thickness of 3.5 mm, is a combination of a stable design made of the best quality steel and three rollers with a diameter of 125 mm each, which guarantees the best bending quality and precision. During its service life, the MTP ESR-2020X3.5 E plate rolling machine has been used little and has worked a small number of hours. The total weight of the machine is 1100 kg. Technical data of the plate rolling machine MTP ESR 2020 X 3.5 E - number of rollers: 3 - maximum sheet metal thickness: 3.5 mm - maximum sheet metal width: 2020 mm - roller diameter: 125 mm - roller length: 2070 mm - foot control - motor power: 3 kW - power supply: 3x 400 V; 50 Hz - weight of machine: 1100 kg

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

Plate bending roll Capacity 3000x75 mm MG model 4ROLL Hydraulic machine with double pre-pinch -plate width up to 3000 mm -plate rolling thickness 75 mm Prebend 55 mm Tightest bending dia ID 800 mm Rolls length 3100 mm Upper roll 680 mm Lower roll 620 mm hydraulic unit power 100 Hp Hardened surface of the 4 rolls Pre-pinching with adjustable load to perform best roundness on edges Driven rolls powered with gear units axial and hydro motors each Cone plates bending, hydraulic conical plate rolling Electric commands joysticks and position readout with 4 axis cnc Drop-end hydraulic front open to unload closed shells. Digital readout of the 4 bending rolls. Variable speed rolling control. Central support can be added to support large dia. Shell forming Side arm can be added to hold in place think plate sheet being formed Weight of the machine ...

Universal machine for elongating wheat doughs, mixed wheat and rye doughs (30% and 70% rye), rye doughs without a rolling table. Technical data: Weight range: 200-2000 gr Machine capacity: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW Advantages: Gentle elongation due to the correct choice of the length of the elongation path, 3-stage dough processing: rolling, rolling, shaping, Low dough fatigue, Modern design, Quick and easy maintenance of the machine, stainless steel housing, Feeding hopper with adjustable opening.

It is a used, reconditioned Seewer Rondo Kombi sheeter SKO 67 for sale. The machine is fully functional, new belts are assembled before delivery. The combined dough sheeter is suitable for all types of dough, turing and rolling out for long-working bread of all types of bread dough, rye, wheat and mixed bread doughs with a straight end, for long-rolling plait, pretzel sticks as well as knitting Parisian bread and caviar sticks. Ribs can also be made. Sandwich dough pieces are rolled out and hammered in. Specifications: - with pull-out tape - has manual, infinitely variable roller adjustment - Synchronous gear prevents jamming, shrinking or tearing of the dough sheet - Length for rolling out (working position) 2500mm - Connection: 400V, 16A-CEE plug Price on request.

Sheet thickness: 5,00 mm Bending length: 1500 mm Number of rolls: 2   incl. 8 changeable spare rolls up to diameter. mm High production cylinders and tubes Very shortrolling times Very short straight ends and roundness tolerances Less dependence on plate quality than other machines Designed to prebend and roll the plate into a cylinders in one pass and short cycle time. Rolling width:                 1500mm Rolling thickness 3x toproll Ø:5mm Top Roll Ø:                    110mm Bottom Roll Ø:                 120mm Number of rolls:               2 Rolling speed:                 2,7 or 5,5 Length:              &nb ...

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table pl ...

Robust swivel milling machine 245 medio from Panhans - Hokubema swivels from 45 to +45 degrees in very good equipment and rolling table Ideal machine for window manufacturers due to roller table Positioning control in 2 axes for spindle height and spindle inclination Reinforced drive motor 7.5kW with automatic motor brake and stepless speed control from 1500 to 10,000 rpm R/L barrel Swivel angle from -45 to +45 degrees, electrically adjustable Height adjustment electrically adjustable HSK-80 Rapid shaft change spindle with 30mm diameter, change to other diameters is possible quickly Comfort stop with digital display of the total adjustment, adjustment by hand crank Stop with comfort lifting device hydraulically swivel away (for bow milling work, etc.) Zeromaster Reference Device for Milling Height Adjustment Table extension on the right with extendable workpiece support Tab ...

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

-Plate rolling machine rubber urethane pinch roll 1-one-pass rolling with pre-bending -Plate sheet width max. 3000 mm -Plate thickness 2 mm depending on the material hardness -fully hydraulic operated with power unit self enclosed - 9 Kw electric power 400Vac/50 Top shaft size 110 mm -Lower roll size 380 mm urethane coated rubber -Hydraulic front opening for the unloading of closed shells. -Upper beam with adjustable pre-load to compensate the deflection of the top roll under load. -Console electric manual/automatic work sequence with digital readout. - EQUIPMENT INSTALLED WITH THE MACHINE -Vacuum cups lifter plate width 3000 mm -Automatic feed pusher plate sheet loader into the rolls- -Side support hydraulic operated with conveyor belts motorized cradle system, all parts rubber coated to protect the plate surface from scratches.

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

plate thickness: 3,5 mm roll diameter: 120 mm : 1550 mm engine output: 2,2 kW weight of the machine ca.: 750 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers top roller has smaller diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,5 mm roll diameter: 120 mm : 1300 engine output: 2,2 kW weight of the machine ca.: 660 kg Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers heavy duty welded steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 ROLL HYDRAULIC MODEL 1000 x 22mm CNC EVO GRAPHIC 4AXIS PROG PLATE BENDING ROLL PLANETARY DOUBLE PRE-PINCH PLATE PRE-BENDING capacity: -Width of plate: 1000 mm -Thickness of plate rolling 22 mm -Thickness of plate pre-bending 16 mm minimum bending diameter ID 280 mm depending on the plate thickness vs. yield strength Rolls -Surface length mm. 1050 -top roll mm. 250 -lower roll mm. 260 -Power electric 15Hp on centralized hydraulic unit , voltage 3ph Vac 400/50 Configuration installed • Hardening of the 4 rolls , very high resistance against wear. • Central rolls both driven powered with axial gearbox and direct drive hydraulic motor. • Calibration system for the re-rolling of welded shells rounding unwanted flat spots. • Console electric on wheels with centralized commands joysticks CNC position r ...

External thread cutting and rolling machine make WAGNER type GU 4 - handTechnical specifications:Center height: 180 mmmetric thread M: M 8 - M 52Inch thread W: 3/8 - 2Pipe thread inch R: 1/4 - 3TR:10 - 44max. processing length: 600 mmFeed: by hand24 speeds: 16 - 355 rpm.Drive power: 4.0 kWOperating voltage: 380 VExternal dimensions L x W x H: 2350 x 950 x 1360 mmMachine weight approx.: 1300 kgWith- Thread cutting head with eccentric ring WDK- many tools- 3 axial rolling heads Fette FU 5 S, F5/U5, F6/U6used, in good and well-kept conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Thread rolling machine ORT RP18 PLC 2 roll 18 tons ejector Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior [https://it.wikipedia.org/wiki/Fatica_(scienza_dei_materiali)]) or the creation of a thread [https://it.wikipedia.org/wiki/Filetting z more resistant than the one obtained by turning [https://it.wikipedia.org/wiki/Tornitura], thanks to a greater hardening [https://it.wikipedia.org/wiki/Incrudimento] of the material., Power (Ton): 18, Number of rollers: 2, PLC: Siemens

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

Thread rolling machine ORT RP50U 2-roll 50 tons swiveling heads, Electronic/electrical retrofit with PLC to control position, power, roller speed, etc., New hydraulic pump The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools, Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (hence the fatigue behavior of the material., Power (Ton): 50, Number of rollers: 2

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 1 year warranty Specification: Monobloc laboratory rolling mill 200 x 400 mm - new - roll diameter: 200 mm - roll length: 400 mm - roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: bearing with grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roll gap and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to reduce the to reduce the working area - Stainless steel tank - New safety cage - 2x AC brake motors make Siemens: each 5,5 kW, 400 V, 50 Hz - Painting: with RAL colours according to customers request - New electrical ...

Rolling machine NORTAN mod. Aurora 16 Year: 1999 Counterclockwise direction Electric panel on teh side 16 rolling heads Safety protections

Rolling machine ROBINO&GALANDRINO – ASTRA 10 Year: 1998. Speed: 10.000 bph Direction: Clockwise 10 rolling heads. Equipment for processing bottles with diameters of 64, 78, 81 and 86 millimeters. Safety protections. No capsules distribution system

Combi sheeting machine Second-hand machine - overhauled by a specialist 6 months warranty at call Properties: + mobile combination sheeting machine + Year of construction 1999, workshop overhauled 2023 + suitable for all types of dough for rolling out and touring + equipped with new felt and linen tapes and scrapers + equipped with extendable roll-out table as an extension + all relevant parts have been refelted + with flour container + with trawl net & corrugated mat for beating dough pieces, rolls or breads + with long roll station at the bottom for all doughs for long rolling + Carrier belt for high transport (approx. 83 cm height) of the elongated rolled dough pieces + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker + comes with instruction  ...

Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...

Technical details: - Spindle diameter: 400 mm - Max. diameter of milling tool: - Mechanical spindle height adjustment with analogue scale - Foldable rolling table - Rolling table travel max. 1,430 mm - Table length: 800 mm - Table width: 385 mm - with eccentric pressure apparatus - 1 x extraction nozzle milling machine, diameter 160 mm - 1 x suction nozzle saw, diameter 80 mm - Max. diameter of saw blade: 400 mm - Saw blade shaft diameter: 30 mm - 1 x saw blade QW 2020 x 400 x30 mounted - 1 x splitting wedge mounted - 2 x engine brake installed - With aliminium length stop (length 3,000 mm) Engine data milling unit: - Voltage: 400 V - Current: 15 A - Frequency: 50 Hz - Power: 7.5 kW - Speed: 2,850 rpm Engine data sawing unit: - Voltage: 400 V - Current: 4.8 A - Frequency: 50 Hz - Power: 2.2 kW - Speed: 2,760 rpm Dimensions (LxWxH): 2,000 x 1,530 x 1,61 ...

Used multi-spindle machine INDEX MS36E built in 1996 including a lot of accessories (collets, synchronizer guns, interchangeable wheels, various working curves, etc.) The plant is virtually ready for dispatch, in a dismantled state for inspection. For photos, technical data and a list of accessories, see Appendices. It has no major defects, is basically ready for operation, only the rubber hoses should be changed before commissioning and the coolant-lubricant system should be thoroughly cleaned and rinsed throughout. Accessory listing MS36E Iemca Loading Magazine Oil filter system (+3 rolls of filter paper) Collets Synchronizer Clamps (sentences) Ø 24 Ø 16 Ø 26 Ø 20 Ø 27 2x Ø 23 Ø 28 2x Ø 26 Ø 30,5 2x Ø 27,5 Ø 31 Ø 32 div. jaws Ø 33 for 3-jaw chuck Ø 34 Ø 36 SW 24 1x spindle stop (currently layer 4) 3 sets of rod guide tubes Various reductions f ...

Rolling mills for cold rolling of sheets 2 types of LSTC profiles (C and U) + PIR profile panel. Documents with characteristics can be obtained as a file. to or email.

Reel chassis, rolling trolley, trolley, hand-operated YALE HTG1-A load capacity: 1000 kg beam width: 50 - 220 mm eyelet: inner diameter: Ø 30 mm, length: 33 mm chain length: approx. 5.0 m ( single ) New, with documents ! Dimensions ( rolling trolley ): 300 x 260 x 190 mm Dimensions ( packaging ): 320 x 290 x 250 mm