rolling used for sale

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Key data: 305 mm, 550 mm

available 22" Mill Decription attached!

Description: Including extensive stock of thread rolls Approx. Onsite Dimension. (l x w x h): 2,800 x 1,100 x 1,900 mm, weight approx.: 1,900 kg

Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverter weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

one pass rolling and curving machine dia of upper roll (steel): 100 mm dia of under roll (rubber): 270 mm

an older and used good cold rolling mill for the production of ribbed structural steel wire

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

NANTONG SHENGLI HEAVY MACHINE MANUFACTURING W12-25X3000 plate rolling machine was manufactured in 2015 by Chinese manufacturer Nantong Shengli Heavy Machine Manufacturing Co., Ltd. The plate rolling machine has 4 rolls driven by a hydraulic motor with a diameter of 430 mm (upper roll), 390 mm (lower roll) and 330 mm (side rolls). The 4-roll NANTONG SHENGLI HEAVY MACHINE MANUFACTURING W12-25X3000 rolling machine allows rolling sheet metal with a maximum length of 3000 mm and a thickness of 25 mm at a working speed of 8 m/min. The axes of the large plate rolling machine are controlled by an NC controller with a touch screen. The plate rolling machine have worked a small amount of time. The total weight of the machine is approx. 23 tonnes. Technical parameters of the Nantong Shengli Heavy Industry W12-25×3000 plate rolling machine - NC control - maximum length of the rolled metal s ...

Sheet thickness: 14,00 mm Bending length: 2050 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: CNC DAVI TOUCH Motorised Top support 1200 kg Hardned rolls 48-62 HR Rockwell C Conical bending attachment Minimum rolling diameter 270 mm   Rolling width:                 2050mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    240mm Bottom Roll Ø:                 230mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 6 Adjustiment  ...

pressure: 10 t max. workpiece diameter: 2-50 mm threading length: mm Control: SIEMENS SIMATIC total power requirement: 12 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: LTH 1,3 x 1,5 x 1,6 m Roller stroke 80mm smallest/largest center distance d. Rolling spindles 117/197 mm Rolling spindle height above Machine bed 160 mm max. tool diameter 175 mm Mounting diameter of the rolling spindle 54 mm Recording length of the rolling spindle 75 mm Swivel angle of the rolling spindle -/+ 10 degrees Rolling spindle speed (infinitely variable) rpm 10-100 Motor for roller spindle drive 7.5 KW Accessories/equipment - 13 sets of thread rolls in total (2 x set M4x0.7, 2 x set M6x1.00, 3 x set M8x1.00, 5 x set M8x1.25, 1 set M12x1.00) - Work light - Process lubrication - Central lubrication - Foot pedal - technical documentation The data for this ad was created with ModulMWS - the sof ...

Key data: 188 , 3100 , 4

Sheet thickness: 188,00 mm Bending length: 3100 mm Number of rolls: 4   Without side support Conical bending attachment Oil cooler Separate hydraulic power unit Central lubrication Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:34mm Rolling thickness 5x toproll Ø:38mm Rolling thickness prebending:  32mm Top Roll Ø:                    460mm Bottom Roll Ø:                 440mm Side roll Ø:                   330mm Number of rolls:               380 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        0 - 200 mm/min. Adjustm ...

Key data: 13 , 2000 , 4

Sheet thickness: 13,00 mm Bending length: 2000 mm Number of rolls: 4   Rolling width:                 2.000mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:13mm Rolling thickness prebending:  8mm Top Roll Ø:                    230mm Bottom Roll Ø:                 230mm Side roll Ø:                   195mm Number of rolls:               4 Rolling speed:                 5m/min Adjustiment lower roll:        100mm/min. Adjustment side rolls:         150mm/min. Number of driven rolls:        2 Power:    ...

Sheet thickness: 10,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:7mm Rolling thickness 5x toproll Ø:10mm Rolling thickness prebending:  5mm Top Roll Ø:                    220mm Bottom Roll Ø:                 210mm Side roll Ø:                   165mm Number of rolls:               4 Rolling speed:                 0 - 5 m/min Adjustiment lower roll:        200mm/min. Number of driven rolls:        2 Power:                      & ...

Sheet thickness: 30,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:30mm Rolling thickness prebending:  20mm Top Roll Ø:                    420mm Bottom Roll Ø:                 400mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 0 - 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:  & ...

Sheet thickness: 6,00 mm Bending length: 1250 mm Number of rolls: 6   CNC Brand: _Unknown / Other CNC Model: MG Touch Command MG - MH 1206 Hydraulic 4 roll plate bender 1250 x 6 mm MACH - ID 6418 Make: MG Type: MH 1206 Control: MG TOUCH COMMAND YOP: 2000 CNC Graphical control Touch screen side roll left side roll right rotation top roll drop end ejector Rolling width:                 1.250mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending:  3mm Top Roll Ø:                    120mm Bottom Roll Ø:                 115mm Side roll Ø:                   105mm Number of rolls:            &nb ...

Sheet thickness: 12,00 mm Bending length: 1200 mm Number of rolls: 4   CNC Brand: Siemens CNC Model: OP7 Davi Promau - MCB 1222 CNC 4 roll plate bender 1200 x 12 mm MACH - ID 6411 Make: Davi Promau Type: MCB 1222 Control: Siemens OP7 YOP: 2004 Rolling width:                 1.200mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  8mm Top Roll Ø:                    220mm Bottom Roll Ø:                 200mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 0 - 5 m/min Adjustiment lower  ...

Sheet thickness: 16,00 mm Bending length: 2000 mm Number of rolls: 4   Extra top rol 200 mm SIEMENS SIMATEC CNC Top support Double cylinder for more pressure on lower roll Rolling width:                 2.000mm Rolling thickness 3x toproll Ø:13mm Rolling thickness 5x toproll Ø:16mm Rolling thickness prebending:  10mm Top Roll Ø:                    280mm Bottom Roll Ø:                 250mm Side roll Ø:                   200mm Number of rolls:               4 Rolling speed:                 5m/min Control:                       Sieme ...

Sheet thickness: 16,00 mm Bending length: 4100 mm Number of rolls: 4   Rolling width:                 4.100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:16mm Rolling thickness prebending:  13mm Top Roll Ø:                    400mm Bottom Roll Ø:                 370mm Side roll Ø:                   290mm Number of rolls:               4 Rolling speed:                 5m/min Top support:                   Yes  Side supports:                 Yes  Number of driven rolls:&n ...

Sheet thickness: 8,00 mm Bending length: 1000 mm Number of rolls: 3   2 driven rolls Hydraulic tilting lateral roll Rolls on ball bearing Smallest bending diameter ca 165 mm Rolling width:                 1.000mm Rolling thickness 3x toproll Ø:7mm Rolling thickness 5x toproll Ø:8mm Rolling thickness prebending:  6mm Top Roll Ø:                    135mm Side roll Ø:                   135mm Number of rolls:               3 Rolling speed:                 5m/min Adjustment side rolls:         100mm Number of driven rolls:        2 Power:                ...

Sheet thickness: 3,00 mm Bending length: 2050 mm Number of rolls: 3   MACH - ID 6339 Make: HAEUSLER Type: SIHRV 10/3 YOP: 2001 Rolling width    2.050 mm Rolling thickness 3x toproll Ø    10 mm Rolling thickness 5x toproll Ø    13 mm Rolling thickness prebending        8 mm Top Roll Ø    250 mm Side roll Ø    230 mm Number of rolls     3 Rolling speed       0 - 7 m/min Number of driven rolls      3 Power       7.5 kW Dimensions Length     3.000 mm Width        2.200 mm Height       3.000 mm Weight       10.000 kg

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   FACCIN - 3 HEL 3134 3 roll plate bender 3000 x 25 mm MACH - ID 6329 Make: FACCIN Type: 3 HEL 3134 YOP: 2009 Rolling width      3.000 mm Rolling thickness 3 x toproll Ø    20 mm Rolling thickness 5x toproll Ø     25 mm Rolling thickness prebending      18 mm Top Roll Ø     340 mm Side roll Ø     300 mm Number of rolls    3 Rolling speed      0 - 5 m/min Adjustiment lower roll      200 mm Power      20 kW Dimensions Length      5.000 mm Width       2.000 mm Height      2.100 mm Weight     13.000 kg

Sheet thickness: 4,00 mm Bending length: 250 mm Number of rolls: 3   ROUNDO - PM-0 Quick rolling machine 250 x 4 mm MACH - ID 6320 Make: ROUNDO Type: PM-0 YOP: 1995 Rolling width    250 mm Rolling thickness 3  x toproll Ø4 mm Rolling thickness 5  x toproll Ø5 mm Top Roll Ø    100 mm Bottom Roll Ø  40 mm Number of rolls    3 Rolling speed     2/4 m/min Power      3.9 kW Dimensions Length      1.000 mm Width        1.900 mm Height       1.800 mm Weight       800 kg

Sheet thickness: 25,00 mm Bending length: 2500 mm Number of rolls: 3   ROUNDO - PS 360 3 roll plate bender 2500 x 30 mm MACH - ID 6293 Make: ROUNDO Type: PS 360 YOP: 1978 Rolling width    2.500 mm Rolling thickness 3x toproll Ø     25 mm Rolling thickness 5x toproll Ø     30 mm Rolling thickness prebending      20 mm Top Roll Ø     360 mm Side roll Ø      340 mm Number of rolls       3 Rolling speed       0-5 m/min Power       30 kW Dimensions Length       4.500 mm Width         2.200 mm Height        2.400 mm Weight       20.000 kg

Sheet thickness: 16,00 mm Bending length: 2100 mm Number of rolls: 4   AKYAPAK - AHSY 270 x 2100 Hydraulic 4 roll plate bender 2100 x 16 mm MACH - ID 6289 Make: AKYAPAK Type: AHSY 270 x 2100 YOP: 2008 Rolling width    2.100 mm Rolling thickness 3x toproll Ø     16 mm Rolling thickness 5x toproll Ø     20 mm Rolling thickness prebending      13 mm Top Roll Ø     270 mm Bottom Roll Ø       250 mm Side roll Ø       210 mm Number of rolls     4 Rolling speed       1-6 m/min Power     11 kW Dimensions Length    4.800 mm Width     1.800 mm Height    1.800 mm Weight    7.000 kg

Sheet thickness: 10,00 mm Bending length: 4000 mm Number of rolls: 3   FACCIN - 3 HCD 4028 3 roll plate bender 4000 x 10 mm MACH - ID 6276 Make: FACCIN Type: 3 HCD 4028 YOP: 2004 Rolling width    4.000 mm Rolling thickness 3 x toproll Ø  8 mm Rolling thickness 5x toproll Ø   10 mm Rolling thickness prebending   7 mm Top Roll Ø    285 mm Side roll Ø    265 mm Number of rolls    3 Rolling speed    5 m/min Control    Digital Read Out Number of driven rolls    3 Power 15 kW

Sheet thickness: 70,00 mm Bending length: 3000 mm Number of rolls: 3   PULLMAX KUMLA - SALI 3000 - 50 3 roll plate bender 3000 x 70 mm MACH - ID 6249 Make: PULLMAX KUMLA Type: SALI 3000 - 50 Rolling width    3.000 mm Rolling thickness 3x toproll Ø   60 mm Rolling thickness 5x toproll  Ø  70 mm Rolling thickness prebending      50 mm Top Roll Ø   650 + 450 mm Bottom Roll Ø      650 mm Number of rolls    3 Rolling speed      0 - 4 m/min Number of driven rolls        2 Power      73,6 kW Dimensions Length      10.500 mm Width          4.000 mm Height         3.000 mm Weight        155.000 kg

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id      6024 MAKE           Faccin Italia TYPE             HCI 3050 - 25/20 YOP               1991 SPECIFICATIONS Rolling width        3050 mm Rolling thickness   3   x toproll Ø20 mm Rolling thickness 5    x toproll Ø25 mm Rolling thickness prebending        20 mm Top Roll Ø      400 mm Side roll Ø      350 mm Number of rolls        3 Rolling speed          6 m/min Adjustiment lower ro        ll0 - 200 mm/min. Power          25 kW DIMENSIONS Length      & ...

Sheet thickness: 150,00 mm Bending length: 3000 mm Number of rolls: 4   MACH-id     5563 MAKE          Haeusler TYPE           VRM-HY YOP             1990 / 2000 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø     120 mm Rolling thickness 5x toproll Ø      150 mm Rolling thickness prebending       100 mm Top Roll Ø          910 + 820 + 740 mm Bottom Roll  Ø    940 mm Side roll Ø           780 mm Number of rolls    4 Rolling speed        2 + 4 m/min Adjustiment lower roll        200 mm/min. Adjustment side rolls    &nbs ...

Sheet thickness: 17,00 mm Bending length: 3000 mm Number of rolls: 3   MACH-id    5354 MAKE          Biko TYPE           3 HCD 3031 YOP             1996 SPECIFICATIONS Rolling width         3000 mm Rolling thickness 3x toproll Ø    17 mm Rolling thickness 5x toproll Ø     13 mm Rolling thickness prebending      10 mm Top Roll Ø         315 mm Bottom Roll Ø       295 mm Number of rolls     3 Rolling speed         0-6 m/min Control         Conventionel Number of driven rolls        3 Power          15 kW DIMENSIONS Length  &nb ...

Sheet thickness: 60,00 mm Bending length: 4000 mm Number of rolls: 4   MACH-id    1784 MAKE         Haeusler TYPE           VRM HY YOP             2000 SPECIFICATIONS Rolling width       4000 mm Rolling thickness 3  x toproll Ø      60 mm Rolling thickness 5   x toproll Ø     50 mm Rolling thickness prebending       40 mm Top Roll Ø       710 mm Bottom Roll Ø        640 mm Side roll Ø      520 mm Number of rolls          4 Rolling speed      1/4/6/8 m/min Top support         Yes Side supports       Yes Number of driven rolls  ...

Sheet thickness: 65,00 mm Bending length: 3000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: HAEUSLER MACH-id       5424 MAKE           Haeusler Swiss TYPE             VRM - HY YOP               2001 SPECIFICATIONS Rolling width        3100 mm Rolling thickness 3  x toproll Ø     45 mm Rolling thickness 5x toproll  Ø       60 mm Rolling thickness prebending        40 mm Top Roll Ø       570 + 430 mm Bottom Roll Ø     540 mm Side roll Ø      420 mm Number of rolls      4 Rolling speed       2/4/6 m/min Control        HAEUSLER  ...

Sheet thickness: 6,00 mm Bending length: 2000 mm Number of rolls: 3   MACH-id    5393 MAKE         AKYAPAK TYPE          ASM-S YOP            1999 SPECIFICATIONS Rolling width        2000 mm Rolling thickness 3  x toproll Ø       6 mm Rolling thickness 5  x top roll Ø      8 mm Rolling thickness prebending       4 mm Top Roll Ø       170 mm Bottom Roll  Ø  170 mm Side roll  Ø        150 mm Number of rolls     3 Rolling speed 4,8 m/min Power        4 kW DIMENSIONS Length       4000 mm Width         1300 mm Height        1 ...

Sheet thickness: 20,00 mm Bending length: 3000 mm Number of rolls: 4   incl. hydraulic top support incl. side support incl. spare roll 300 mm ( small cones) Rolling width:                 3.000mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  18mm Top Roll Ø:                    430 + 300 mm Bottom Roll Ø:                 430mm Side roll Ø:                   300mm Number of rolls:               4 Rolling speed:                 2 + 4 m/min Adjustiment lower roll:        200mm/min. Adjustment side rolls:    & ...

Sheet thickness: 14,0 mm Bending length: 2100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Bend iT 7 Axis Touchscreen Bend iT Cone bending device Hardned rolls (Hrc 58) Force lower roll to upper roll 70 Ton New over EUR 100.000 Rolling width:                 2.100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending:  10mm Top Roll Ø:                    260mm Bottom Roll Ø:                 250mm Side roll Ø:                   180mm Number of rolls:               4 Rolling speed:                 0 - 8 m/min Number of dri ...

Sheet thickness: 50,00 mm Bending length: 3100 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: DAVI EASY Rolling width:                 3100mm Rolling thickness 3x toproll Ø:40mm Rolling thickness 5x toproll Ø:50mm Rolling thickness prebending:  40mm Top Roll Ø:                    530mm Bottom Roll Ø:                 470mm Side roll Ø:                   400mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        0 - 200mm/min. Adjustment side rolls:         0 - 200mm/min. Top support:  ...

Window drip cap roll forming machine PO-1 Window drip cap roll forming machine PO-1 allows to produce window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine's fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To im ...

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 3   Top support Variable geometry with three movebale rolls Linear slidews for roll movement Lubricatipon system Separate pendant control with optical position side rolls Rolling width:                 3050mm Rolling thickness 3x toproll Ø:30mm Rolling thickness 5x toproll Ø:40mm Rolling thickness prebending:  20mm Top Roll Ø:                    420mm Side roll Ø:                   380mm Number of rolls:               380 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:        ...

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   Hydraulic drop end Digital read out position side rolls Pendent control position side rolls Rolling width:                 3000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  16mm Top Roll Ø:                    420mm Side roll Ø:                   405mm Number of rolls:               3 Rolling speed:                 6,5 Length:                        5800mm Width:                        &nbs ...

Sheet thickness: 4,5 mm Bending length: 1000 mm Number of rolls: 3   Rolling width:                 1000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  3mm Top Roll Ø:                    110mm Bottom Roll Ø:                 110mm Side roll Ø:                   110mm Number of rolls:               3 Rolling speed:                 5 Power:                         4kW Length:                        1500mm Width:   ...

Sheet thickness: 60,00 mm Bending length: 3000 mm Number of rolls: 4   Rolling width:                 3000mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  55mm Top Roll Ø:                    660mm Bottom Roll Ø:                 650mm Side roll Ø:                   550mm Number of rolls:               4 Rolling speed:                 0 - 3 M/Min Adjustiment lower roll:        0 - 300mm/min. Adjustment side rolls:         0 - 300mm/min. Number of driven rolls:        2 Power:& ...

Sheet thickness: 12,00 mm Bending length: 2500 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: PASS 270 Rolling width:                 2500mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:12mm Rolling thickness prebending:  8mm Top Roll Ø:                    270mm Bottom Roll Ø:                 270mm Side roll Ø:                   215mm Number of rolls:               4 Rolling speed:                 0 - 6 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Control:      ...

The Rollfix 300 Fritsch rolling machine is a classic among rolling machines. This model impresses with its gentle and even rolling out of dough, simple operation and easily reproducible production results. Key features of the machine: Rolling speed: 40 m / min. Working width: 650 mm. Roller diameter: 88 mm. Gentle and even rolling out of dough.

Sheet thickness: 110,00 mm Bending length: 3500 mm Number of rolls: 4   CNC Brand: Siemens CNC Model: Siemens TOUCH Rolling width:                 3500mm Rolling thickness 3x toproll Ø:80mm Rolling thickness 5x toproll Ø:110mm Rolling thickness prebending:  90mm Top Roll Ø:                    900mm Top Roll Ø:                    900mm Bottom Roll Ø:                 800mm Side roll Ø:                   600mm Number of rolls:               4 Rolling speed:                 0-6 Adjustiment lower roll:        0-200mm/min. Adjustme ...

Sheet thickness: 70,00 mm Bending length: 3050 mm Number of rolls: 4   Rolling width:                 3050mm Rolling thickness 3x toproll Ø:60mm Rolling thickness 5x toproll Ø:70mm Rolling thickness prebending:  50mm Top Roll Ø:                    630mm Bottom Roll Ø:                 600mm Side roll Ø:                   500mm Number of rolls:               4 Rolling speed:                 0 - 5 Adjustiment lower roll:        200mm/min. Adjustment side rolls:         200mm/min. Number of driven rolls:        2 Power:    & ...

Used Rollfix Fritsch 60/650E rolling machine The Rollfix Fritsch 60/650E rolling machine is a model that impresses with its gentle and even dough rolling, simple operation and easily reproducible production results. Suitable for all types of dough, for rolling and unrolling all types of bread dough, rye dough, wheat dough and mixed dough. Key features of the machine: digital control, flour sprinkler, long roller, transport belt width 650mm, roller opening 0.3 - 45mm, gentle and even rolling, production of thin dough, simple handling, processing of dough blocks up to approx. 15 kg, advancement speed 93,3 cm/sec, mobile on rollers, power - 1.4 kW.

Sheet thickness: 5,00 mm Bending length: 2500 mm Number of rolls: 4   Rolling width:                 2500mm Rolling thickness 3x toproll Ø:3,5mm Rolling thickness 5x toproll Ø:5mm Rolling thickness prebending:  2,5mm Top Roll Ø:                    150mm Bottom Roll Ø:                 150mm Side roll Ø:                   150mm Number of rolls:               4 Rolling speed:                 0-5 Adjustiment lower roll:        100mm/min. Adjustment side rolls:         100mm/min. Length:                     ...