rolling used for sale

Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures

Rolling mirror approx. 50x175h cm

Dimensions per tray: 2000 x 1300 mm with a total of 40 sheeting trays Reference: Pieper - Lot 9 Auction-ID: A7-46763-5

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T

Total load 200 kg, floor load 80 kg Auction-ID: A1-46781-20

Roller diameter 200 mm, coolant device and machine light

Qty. 1 Second-hand Sendzimir Cold Rolling Mill Mfc.: INNSE Type: ZR23 C-25 – 20-Hi Built: 1977 Stopped: 2025 Steel grades: HSLA, low and high carbon steel, etc. Strip width: 300 - 650 mm Thickness: 0.05 – 3.0 mm Max. tensile force: 15.000 kg Coil weight: 10 T AGC & PLC system: ABB

Roller diameter 150 mm, coolant device and machine light

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Rolling stand MG History Wall approx. 300x220h cm purchased in 2024 for 4.761,- EUR net, BW 31.12.24 4.562,- EUR net

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T

Equipped with drive! Approx. 2 to 4 tons; remote control included; Auction-ID: A1-41997-96

Viewing by appointment Auction-ID: A1-43891-34

Qty. 1 Second-hand Reversing 4-Hi Cold Rolling Mill Mfc.: NKMZ, ABB, Grip Engineering, Launer Engineering Built: 1972 Type: Reversible Cold Rolling Mill (Quarto-1800) The cold rolling stand has been modernized by ABB in 1995. The mill was fitted with automatic gauge control (AGC), flatness control unit (AFC), spot cooling system (by Grip Engineering), and work roll changing device (by Launer Engineering). Besides, the mill has been equipped with a horizontal rolling Oil filtration system (by Launer Engineering). Flatness & AGC control: available /1995

Plate rolling machine manufactured in 2022. This FACCIN 4HEL-2017 features a bending length of 2000 mm and a maximum bending capacity of 6 mm for mild steel. It is capable of handling plate thicknesses up to 6 mm without prebending at specific conditions. If you are looking to get high-quality bending capabilities, consider the FACCIN 4HEL-2017 machine we have for sale. Contact us for further details.

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-43891-32

Equipped with steel dosing roller Ø 130 mm, rubber applicator roller Ø 205 mm, \"Siemens\" frequency converters with digital readout, adjustable workpiece height from 2 - 80 mm, working width 400 mm, workpiece length at least 200 mm, rotation speed of 5-15 m/min; power 2.5kW; including manuals; This lot is part of Eindcombinatie Kavel 14 Auction-ID: A1-44305-12

This is a combination of lots 12 and 13 consisting of 2019 \"Soest\" RC-400 rolling machine and \"Soest\" VP-2-400 polishing and brushing machine Auction-ID: A1-44305-14