rolling used for sale

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Venyeskob, Year: 2007, Control: CNC-6300, Spraying line: yes, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Belt conveyor: yes, Brushing machine: no, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venyeskob, Spraying heads - total: 2, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Laquer circles: 3, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2, über Band: yes, by rollers: yes, Dry exhauster: yes, Senkrechtrockner 1: Düsentrockner, Dust exhaust (number): yes, UV dryers - 1 lamp (number): 2 Lampen/schräg, Year :2007

Refer to code 1155 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Venyeskob, Type: Venspray Comfort, Year: 2017, Control: EPS CNC Liniensteuerung, Spraying line: yes, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350 - 2500, Min.-max. workpiece height in mm: 3 - 80, Belt conveyor: yes, work piece cleaning: yes, Spraying machine: Venspray Comfort, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 3, Laquer system - airless: Airmix, Lackrückgewinnung über Band: yes, Wäscheranlage: 1, by rollers: yes, Dry exhauster: yes, Werstückabmessung max:: 300-4000, Werstückabmessung max:: 300-4000, Jet dryers (number): 2, 2 UV lamps qty.: 3 D Trockner, Belt conveyors (number): 2, Jet dryers (number): 2, Feedin speed m/min: 3-5 -, Year :2017

Refer to code 1170 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Heesemann Cefla Türenlackieranlage, Type: Cefla Robot, Year: 2004, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Dry exhauster: yes, Jet dryers (number): Hochtrockner, Sanding machines (number): 1, Brushing machine: no, Design sanding machine no 1: Querband/Längs/längs, Dust exhaust (number): yes, UV dryers - 3 lamps inclined (number): yes 120 Watt, Jet dryers (number): Hochtrockner, High dryers (number): 32, Length of pallets mm: 5500, Feedin speed m/min: 3-6, Year :2004

Refer to code 1171 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Venyeskob Venspray Perfect, Type: Lackierstrasse mit Trocknung, Year: 2015, Control: Venyeskob/, Spraying line: yes, Work piece width min-max mm: 50-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Belt conveyor: yes, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venspray Perfect, Farbmanagment: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2 Stück, Dry exhauster: yes, Dust exhaust (number): yes, Year :2015

STOCKBLENDER: 1000 / 1500 / 2540 - COMERIO ERCOLE / OMG / LTC / MECCANICHE MODERNE / LAMPERTI Refer to code 1034-1035-1036-1037-1038-1039-1040-1041 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Spritzstrasse Giradina, Type: Frontenlackieranlage, Year: 2005, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 5-60, Work piece length min-max mm: 100, Geamtlänge Meter: ca.30, Feeding speed m/min: 2,5-5, UV-Strasse: yes, Wasserlackstrasse: yes, Conveyor belts: 2, Schleifmaschinen: kein, Enstaubungsmaschinen: 1, Spraying machine: 1, UV dryer: yes, Anzahl Lampen: 3, Jet drier: 1 MOS Trockner 1 Düsentrockner, Outlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Spraying heads - total: 8, work piece detection: yes, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Jet drier length in mm: 10000+17000, Outlet conveyor: yes, FREE TEXT: Inkl. Reinraumk ...

Qty. 1 Second-hand recently overhauled rolling mill Mfc.: Shinkwang Type: 4-Hi Built: 2014 – recently overhauled Previous rolling material: Aluminum 1000 and 3000 alloy Strip width: 650 mm max Strip thickness: 6.5 - 0.2 mm Work Roll: Dia. 210 x 750 mm length Backup Roll: Dia. 600 x 700 mm length Coil weight: 3000 kgs max Rolling speed: 180 m/min Main Motor: 300 kW, 400 V Winder: 150 kW, 400 V Rewinder: 150 kW, 400 V Spare Rolls: WR 4 ea, BR 2 ea

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

Manufacturer: Cattinar Rotoclean, Type: Durchlauflackieranlage, Year: 2001/1985, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 250-4500, Min.-max. workpiece height in mm: 8-60, Spraying line: yes, Spraying heads - total: 8, work piece cleaning: yes, work piece detection: yes, Conveyour system: stahlband, Spraying stations: 1, Fast exchange system spray gun carrier: no, Laquer circles: 2, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Brushing machine: yes, High dryers (number): 90, Length of pallets mm: 4500, Feedin speed m/min: 2-5, Year :2001/1985

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

Manufacturer: Cefla, Type: Beizlinie, Year: 2005, Work piece width min-max mm: 100 - 1300, Min.-max. workpiece length in mm: 3 - 80, Min.-max. workpiece height in mm: 300 - 2010, Working widht max mm: 5, Working width min min mm: yes, Apstapelanlage Typ: no, Cycle rate: yes, Type of stacking system: Bürste D2/1300-15, Conveyour system: yes, Fast exchange system spray gun carrier: Rotostain RT 10, Laquer circles: yes, Laquer system - airless: VS/26-2C, Laquer system - airmix: brush sander, Water cleaning: FEV EU2/7-TT 12850, Working widht mm: Band, Year :2005

Manufacturer: Cefla Sorbini DMC, Year: ca. 1990, Work piece width min-max mm: 1300, Abstapelanlage Typ: no, Roller coater line: yes, Sanding machines (number): 2, Design sanding machine no 1: Quer Längs Längs, Stain rollers qty.: 2, Laquer roller coaters (number): 2, 2 UV lamps qty.: 1, UV dryers - 3 lamps (number): 2, Year :ca. 1990

A granite three-roll mill, presumably made by Bauermeister, which was used for marzipan, is available. On-site inspection is possible.

Manufacturer: Superfici mit Hochtrockner, Type: Twinspray, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: Rakel, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 5, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, Dry exhauster: yes, Belt conveyors (number): 2, High dryers (number): 24/5500 mm, Length of pallets mm: 5500, Feedin speed m/min: 3-5, Year :2001

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : RT 70 RCA Year of manufacture : 2004 Bosch Control unit Machine has arrived. The machine brings an electronic error. Therefore, the machine is offered in need of repair. The machine comes from the first owner, from a German company. Accessories: according to photos Machine weight approx. [weight]: 1 t Dimensions approx. [size machine]: 140x140x230cm Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We are looking for ...

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

ORT 3RP10 PLC thread rolling machine, inverter (RPM), scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die., Number of rollers: 3

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

Key data: 63 t, 250 mm, 300 mm

Thread and Profile Rolling Machine Machine Type Cylindrical 2-Roll Thread Rolling Machine Max. Rolling Capacity (Force) 630 kN (63 tons) Workpiece Diameter (Min. / Max.) 25 mm / 200 – 250 mm Max. Diameter of Tools (Dies) 300 mm Spindle Diameter 110 mm Spindle Speed Range 10 – 100 rpm Spindle Drive Motor Power 22 kW Total Power Requirement (Connected Load) 26.5 kW Operating Rated Current 54 A Electrical Power Supply 380 V / 50 Hz (Three-phase current) Control / Auxiliary Voltage 110 V / 24 V Required Floor Space (Dimensions) 3072 × 2140 mm Total Machine Weight approx. 7500 – 8000 kg (7.5 – 8 tons) Design Features Twin-roller system: Works with a pair of cylindrical profile rollers. Materials: Suitable for working with high-strength steels, rods, and pipes. Application: Used in heavy engineering to create fasteners, shafts, and other components with i ...

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

This UZMA MAKINA UZH76 was manufactured in 2016. It features a maximum tube diameter of 76 mm, a bending radius of 250 mm, and a wall thickness capacity of 4 mm. The bending angle reaches up to 190° with a speed of 48°/sec. Powered by a 13 kW total motor capacity and a hydraulic pressure of 140 bar. Consider the opportunity to buy this UZMA MAKINA UZH76 plate rolling machine. Contact us for more information.

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

diameter range 10-24 mm Forging power 7-20 to thread length plunge method 195 mm daylight 160 mm max. pitch 3,5 mm roller bore 80 mm roller width 235 mm roller length 195 mm

Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500