rolling used for sale

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

Stock of steel rolling bearings still packaged Various Types and Sizes Approximate quantity : 20 tons PROPERTIES LOCATED IN THE PROVINCE OF MANTUA

Bendmak CYL ST 190-30/5 3 roll plate rolling machine Working length : 3250 mm Maximum thickness : 5 mm Machine is in good working condition

pressure: 0,1- 12 t max. workpiece diameter: 2- 50 mm threading length: 2000 mm stroke: 0- 15 mm pitch max.: 3 mm tool diameter: 200 mm roll spindle turning speed range: 20- 90 U/min weight of the machine ca.: 1,7 t dimensions: 1,4 x 1,1 x 1,4 m used thread rolling machine in good condition - well equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Systainer Rolling Board FESTOOL

Rolling boards TARROX each 575x290 mm, max. 400 kg, 2 pcs.

3 rolls thread rolling machine diameter range 3-36 mm Forging power 10 to thread length plunge method 60 mm through method oo roller width 50-78 mm roller length 60 mm roller bore 28 mm

Description: Machine no. 218 Control: conventional Workpiece diameter 115 mm Workpiece length 2150 mm Toothing diameter 120 mm Number of teeth - max. 96 Number of teeth - min. 12 Rolling head speed 1,800 rpm Feed rate 30 - 180 mm/min Rapid traverse 1,800 mm/min Total power requirement 20 kW Approx. Onsite Dimension. (l x w x h): 5,700 x 3,000 x 2,300 mm, weight approx.: 11,000 kg

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

Material: mild steel Reel in stainless steel;

Various threaded rollers

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Wire rod: 1.8 - 9.0 mm number of caliber: 13; very good

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

Capping machine incl. brushless motor with friction wheels, container diameter 10-100 mm, capacity maximum 25 cycles / min.

About 60 pieces. Timken tapered roller bearings

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Gewindelänge: 130 mm Min. pitch: 0.4 mm Max. pitch: 4 mm Min. roll die diameter: 100 mm Max. roll die diameter: 148 mm Roll bore diameter: 54 mm Roller pressure infinitely adjustable: 17 to Roll axis swivel for thru-feed: 8 ° Roll and pause time infinitely variable: 1 - 30 sec Shaft distance: min.: 120 mm max: 200 mm Feeds: stepless up to: 1.4 mm/s Roll speeds: stepless up to: 280 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 2141 kg Weight total installation approx.: 2401 kg Overall dimensions machine: Length: 1250 mm Width: 1200 mm Height: 1260 mm Space requirement of the electrical box: 800 x 500 mm Various accessories: Set of thread rolls

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Vimar S.L. Type : RC5 Diameter cylinders : 110mm rolls width : 200mm dimensions : ca. 1500 x 600 x 600 mm weight : ca. 150 kg electrical : 380 V, 3 Ph, 50 Hz, 0,75 kw different : working condition rolls heatable / coolable mech. Rolls pressure We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex Warehouse Hess. Lichtenau, unpacked

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

Capacity: 0 t Diameter: 105 mm Length: 0 mm Horizontal and vertical:Horizontal  Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         300mm Capacity Tube:         60 x R 1000 Ø x mm Capacity T-Profile:    80 x 80 x 8 x R 1000 mm Capacity HEA-Profile:  140 x R 2500 mm Working speed:         1000 - 24000 mm/min. Length:                1.500 mm  Width:                 1.200 mm  Height:                1.400 mm  Weight:                1.700 kg  set universal rolls set pipe rolls BC 25 control system    ...

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Power: 12 t Thread diameter maximum: 50 mm Thread diameter minimum: 3 mm MACH-id   5405 MAKE       SENY - Japan TYPE         H-50-D YOP           90 er SPECIFICATIONS Miniumum pressure       0,5 T Maximum pressure         12,5 T Max. workpiece      50 Ø Min. workpiece        3 Ø Min. Threading lenght      130 mm Max. Threading length      170 mm Shaft Ø    54 mm Power      5 kW DIMENSIONS Length        1500 mm Width          1400 mm Height          1500 mm 1 set M4 x 0,7 x Ø 150 1 set M5 x 0,8 x Ø 150 1 set M6 x 1,0 x Ø 150 1 set M8 x 1,25 x Ø 150 1 set M8  ...

Technical data Min. diameter threaded: 4 mm Max. diameter threaded: 20 mm Min. pitch: 0.5 mm Max. pitch: 2.5 mm Max. roll die diameter: 118 mm Roll die width: 50 mm Shaft distance: min.: 100 mm max: 135 mm Shaft diameter: 40 mm Roll speeds: up to: 80 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 2 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1170 mm Width: 740 mm Height: 1050 mm Various accessories: Set of thread rolls Lamp Set of service tools

Capacity: 0 t Diameter: 0 mm Length: 0 mm CN sections bender Manual and Automatic mode for forming discontinuous radius shapes such as Ovals Volutes Ellipses Parabolas     Horizontal and vertical:H + V  Shaft Ø:               100mm Number of rolls:       3 Horizontal:            Yes  Vertical:              Yes  Resistance moment:     33CM³ Capacity flat:         100x 20 mm Capacity Tube:         114,3 x 3,6 Ø x mm Capacity bar:          90 x 5 mm Capacity T-Profile:    100 x 100 mm Capacity HEA-Profile:  120 x 58 mm Working speed:         2,5 - 5 - 7,5 mm/min. Length:  ...

Capacity: 0 t Diameter: 120 mm Length: 0 mm MACH - ID 6233 Make: PULLMAX KUMLA Type: Z-60 CNC Control: PS/R - CNC V5 YOP: 1993 Horizontal and vertical    H + V Shaft Ø    120 mm Number of rolls   3 Resistance moment     56 CM³ Capacity flat    125 x 20 x 1300 mm Capacity Tube     115 x 1200 mm Capacity bar       65 x 65 x 1000 mm Capacity T-Profile     120 x 120 x 13 x 1200 mm Capacity HEA-ProfileUNP     240 x 1800 mm Working speed     6,6 / 6,5 M/Min mm Dimensions Length      1.830 mm Width       1.540 mm Height      1.600 mm Weight      4.600 kg

Capacity: 150 t Diameter: 470 mm Length: 300 mm SPECIFICATIONS Hydraulic / Mechanical HydraulicHorizontal / Vertical / or H + VH + V Shaft Diameter ø170 mm Roll diamter ø470 mm Shaft length300 mm Working speed M/Min.1/8 M/Min Capacity HEB 160 x 160 x 15 x Diam = 1600 mm Capacity Flatt 150 x 25 x Diam = 1500 mm  Power  16 DIMENSIONS Length  3400 mm Width  3390 mm Height  2800 mm Angle 150 x 150 x 16       Ø 1.500Angle 140 x 140 x 15       Ø 1.400T       120 x 120 x 14       Ø 1.200T       160 x 160 x 15       Ø 1.600Flat   150 x 25            &nbs p; Ø 1.500

Capacity: 0 t Diameter: 400 mm Length: 180 mm

ega Plus - LF 330 Internal machine number: Vega Internal C3 number: Variant 10 Printing process: UV flexographic printing Printing units: 1 Own Coating Unit: No Printing ink: UV - flexographic printing ink Drying: UV - drying Painting-partial: No Painting-full: Yes / Flexosleeve Varnishes: Gloss varnish, matt varnish, TTF varnish, luminescent varnish Laminating: No Material width paper and foil: min.: 150 mm / max.: 340 Print width: max. 310 Printing performance: only punching max. 200 m/min., printing max. 70 m/min. max. rolls Ø - down: 1000 mm / max. rolls Ø - up: 400 mm punching width: max. 320 mm Print feed: min. 80T = 254 mm Print feed: max. 136T = 431.8 Format punching: Rotary WGR 240 punching units: 2 Flat punching: No Punching sheet: Yes Punching cylinder: No Airshock cylinder: No Upper punch: Yes Lower punch: Yes Sheet cutting (crosswise) / leaf cutter: No ...

Capacity: 0 t Diameter: 0 mm Length: 0 mm SPECIFICATIES Werking Hydraulisch / Servo / Mechanisch  Mechanical Horizontaal en of verticaal  Hor. As diameter Ø200 mm  Rol diameter Ø350 mm As lengte in mm    630 mm Werk snelheid in M/Min.   4.5 - 9 M/Min Buig capaciteit  IPN  120 x R 2500 mm Buig capaciteit  HEB220 x 22 x R 3500 mm Buig capaciteit  Buis  1 33 x 6,0 mm Vermogen in Kw   15 kW kW AFMETINGEN Lengte 2100 mm Breedte 2000 mm Hoogte 2100 mm  

Capacity: 0 t Diameter: 145 mm Length: 0 mm Make Comac Galileo 4 Type Galileo 40 Year 2011 Profile bender comac galileo 40 Outside diameter max. (mm)Section modus 6 cm3 Inside diameter max. (mm)Shaft diam = 45 Max. pipe length (mm)Roll diam = 145 Max. angleSpeed = 3,7 M/min Wall Thickness (mm)Tube 70 x 2 x 2000 Flatt 60 x 10 x 600 mm Bar 35 x 35 x 600 mm Manipulator Hor & Vert  

TECHNICAL CHARACTERISTICS Year 2018 Length 1000 1.5mm sheet metal Roller diameter 75mm Voltage 400V Frequency 50Hz Power 0.75Kw Current 1.9A 3PH Revolutions 1400r/min

Length: 2600 mm Roll diameter: 10 mm Axial travel: 0 mm Make Akyapak 10 mm Type AHS 2600 Year 2004 4 walzen rundbiegemaschine akyapak 2600 x 10 Sheet thickness (mm) Bend T = 10 mm Bending length (mm) Pre T = 8 mm Number of rolls 4 roller Diameter = 210 / 190 Power = 7.5 kW Speed = 4 M / Min

Reconditioned 3 rolls bending machine Maximum lenth: 2500mm, Maximum thickness: 15mm, Minimum rase: 300mm.

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

UBBDA Three Roll Plate Bending Machine The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells. Electric motors 42 kW, 580 rpm, 750\1500 rpm Dimensions 12900x5300x5620 Gross weight 166260 t

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

Machine is like new Working length : 2050 mm Max. thickness : 10 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Capacity: 0 t Diameter: 42 mm Length: 3000 mm Max.Tube Ø:        42mm Min. Tube Ø:       6mm Max. Wall thickness:2,5 mm Max. Bending radius:270mm Min. Bending radius:25mm Max. bending length:3.000mm 3e dimsion bending:360,000 mm/min. Power:             5.5kW Length:            4.700 mm  Width:             1.300 mm  Height:            1.600 mm  Weight:            3.750 kg