rolling used for sale

rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using  ...

Rolling pin or croissant roller for croissant forms Bakery - Confectionery 2- Rows

Rolling Mill for REBAR and WIRE, cap. 350.000 - 400.000 TPY YOM: 1981 The Mill consists of: • (4) Roughing Mill Stands (1-4) • (4) Intermediate Stands (5-8) • Shear • (4) Intermediate Stands (9-12) • (4) Finishing Stands (13-16) • Split Rebar (A)/Bar (B)/ Wire (C) • Shear • (6) Finishing Stands Rebar (17-22) • Shear • Coolant Bed • (8) Finishing Stands Wire (17-24) Upgrades have been done.

Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Max. rolling force: 12 to Shaft diameter: 54 mm Voltage 50 Hz 3x: 400 Volt Connection power: 14 kW Machine´s weight about: 2400 kg Overall dimensions machine: Length: 1850 mm Width: 1250 mm Height: 2000 mm

Technical data Min. diameter threaded: 27 mm Max. diameter threaded: 90 mm Min. pitch: 1 mm Max. pitch: 6 mm Max. infeed length: 68 mm Max. roll die diameter: 150 mm Roll die width: 35,70 mm Max. rolling force: 17 to Roll axis swivel for thru-feed: 3 ° Shaft diameter: 54 mm Roll speeds: from: 150 rpm up to: 500 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 7.5 kW Machine´s weight about: 2420 kg Overall dimensions machine: Length: 2200 mm Width: 1900 mm Height: 2000 mm

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Technical data Min. diameter threaded: 10 mm Max. diameter threaded: 75 mm Min. pitch: 1 mm Max. pitch: 10 mm Max. infeed length: 148 mm Max. roll die diameter: 200 mm Roll die width: 35,70,100,150 mm Max. rolling force: 60 to Roll axis swivel for thru-feed: +6/-6 ° Shaft distance: min.: 195 mm max: 275 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 50 rpm Voltage 50 Hz 3x: 400 Volt Motor power: 18.75 kW Machine´s weight about: 4700 kg Overall dimensions machine: Length: 2450 mm Width: 2300 mm Height: 2250 mm

Technical data Min. diameter threaded: 8 mm Max. diameter threaded: 50 mm Min. pitch: 1.0 mm Max. pitch: 6.35 mm Max. roll die diameter: 178 mm Roll die width: 35 -150 mm Max. rolling force: 40 to Shaft distance: min.: 170 mm max: 230 mm Shaft diameter: 70 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 11/3.65 kW Machine´s weight about: 2750 kg Overall dimensions machine: Length: 2000 mm Width: 1450 mm Height: 1800 mm Various accessories: Set of thread rolls Lamp Set of service tools Foot pedal

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Technical data Min. diameter threaded: 6 mm Max. diameter threaded: 30 mm Min. pitch: 1.0 mm Max. pitch: 3.5 mm Max. roll die diameter: 148 mm Roll die width: 35 - 70 mm Max. rolling force: 17 to Shaft distance: min.: 130 mm max: 175 mm Shaft diameter: 54 mm Roll speeds: from: 20 rpm up to: 60 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 3.65/2.19 kW Machine´s weight about: 1220 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1340 mm Various accessories: Set of thread rolls Lamp Set of service tools

Macbending SMB200-2000/8-10 4 rolls plate rolling machine Full automatic Lifting System Side Supports Machine is like new condition

Akbend AHS 20/06 Plate rolling machine - 4 rolls 2013

Akyapak AHS 25/13 4 rolls Plate Rolling Machine Side supports Lifting system

Akyapak AHS-10/14x3100 Hydraulic Plate Rolling Machine Machine is in good condition

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

Bendmak APAS 360 hydraulic plate rolling machine Machine is in excellent condition Maximum thickness : 25 mm Top roll diameter : 350 mm

Sahinler 4R HSS 30-400 Plate Rolling Machine Bending length : 3100 mm Maximum bending thickness : 30 mm Upper roll diameter : 400 mm Machine is in good condition

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

Oztas SMR-S 2070 x 170 3 rolls plate rolling machine Machine is like new condition

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

Birlik 3 Rolls Plate Rolling Machine Machine is in very good condition Bending length : 3030 mm Bending capacity : 6 mm Roll diameter : 220 mm Power : 5,5+3 Kw

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

YEAR 2013 THREAD ROLLING MACHINE EXCELLENT CONDITION

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm

3 rolls thread rolling machine diameter range 25-100 mm Forging power 24 to thread length plunge method oo max. pitch 8 mm

Writing desk, rolling desk, floor trolley, logistics trolley, shelf trolley Transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg Roller pult made of tubular steel and profile steel screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop strip, approx. 10 inclined - 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces of swivel-fixed castors (125 mm) with plastic rim and rubber coating on the tread - 2 pieces fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg very good, as good as new condition; used

Magnaghi T12, 2-roll thread rolling machine, new electrics, new auto plunge, This machine can be inspected in our warehouse. Mimu Machine Tools (Italy)

1,800,000 TPY Mini mill for slab and hot rolled coil Tonnage per year 1,800,000 tons Type Slab + Strip in Coils Manufacturer SMS Caster type Curved and Straight Material size (Slab size): 55mmT x 900~1,560mmW x 20,000~43,000mmL 210mmT x 600~1,890mmW x37,790mmL Rolling Mills 4 Hi 6 Stands -Product size(coil): 1.4~16mmT x 900~1,560mmW - 28ton/roll And more machinery Please refer to the attached flyer for more details

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

Product number: 2828 Type: BMB600 Serial number: 11 Belt width: 400 mm Power: 3 x 380V, 50Hz, 1.01kW Dimensions: 2050 x 1200 x 1950 mm Weight: 240 kg Rolling machine for ragout balls (bitterballen)

Manufacturer: ECAI Type: LCG32 YOM: 2008 Machine Number: 70802-002 ECAI LCG32 is a rolling mill with a radial force of 125 tonnes and an axial force of 90 tonnes. It can roll rings with a maximum height of 500 mm, a maximum diameter of 2,500 mm and a maximum weight of 2.5 tonnes (these sizes are for standard steel). For alloy steels, Inconel, etc., they must be adjusted according to hardness.

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

Hydraulic four-roller plate rolling machine type ASH 20/25 Roll thickness 30x2000 mm Year of production 2013 Technical condition: very good Upper roller fi 360 mm bottom roller fi 330 side rollers fi 250 mm

4 rolls, max rolling dimension 2,500 x 22 mm, allows cones to be made, practical for making buckets or anything related to public works.

3-shaft mechanically driven coiler for sheet metal. Roundo Sweden type PS 205. The machine rolls 5 mm black sheet, 8 mm aluminum, to a length of 2550 mm, the diameter of the rollers: upper and remaining 160 mm. A machine with the function of bending sheet metal with side rollers up to 4 mm, and with the function of rolling cones - side roller. Roller position readings. Beveling the side shaft on both sides, bending the lower and side shafts to create cones. Working speeds fast - slow up to 16 rpm. Weight 3580 kg. Power supply 5 kW.

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg