rolling used for sale

Dough sheeter Seewer Rondo SKO 68 Product descriptionManufacturer: Seewer RondoModel: SKO 68Condition: used, functional, baker's conditionManual operationfor all doughs for rolling out and touringleft strap extendablehinghingwith flour containerwith 2 beltsright left-hand rotationon rolls, mobileBelt leftDimensions: Depth 62.5 cm, Width extendableBelt right Dimensions: Depth 75 cm, Width 64 cmOutside Dimensions: Width 200 cm, Depth 120 cm, Height 130 cm For details see pictures.

Mayfran coolant system with Knoll high-pressure pump for internal cooling Scraper Belt Chip Conveyor Mayfran Bar loading magazine 3 m Equipment: 1 x Sawing unit 6 x Feed unit 1 x Turning unit 1 x Grooving Unit 1 x Thread Rolling Unit 16 x Collet SW36 1 x Saw and Turning Bushing SW36 1 x conversion kit of the turning unit up to SW41 1 x Control Pin Turning Station Unit 8 2 x Hydraulic Drill Head 3 x Angle Milling Head

Sawblade tiltable: 45 ° Length of the rolling table: 3260 mm cutting width: 900 mm Motor output: 5,0 kW Cutting height: 100 mm Cutting height at 45°: mm Saw blade diameter: 315 mm Speed: U/min. weight of the machine ca.: 489 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 MONTHS WARRANTY Offer consisting of: - Pocket Folding Machine AF-406A - Flat pile feeder - Standing arch delivery ED-40 Horizon AF-406 A 6-Pocket Folding Machine - Parallel Break Rolling Condition: - Technology: Touch & Work - Memory Fold Types: 13 standard fold types pre-programmed - Job memory: 200 memory slots for repeat jobs - Number of pockets: 1. Folder: 6 pockets -Format: max. 400x650mm; min. 100x50mm - Fold length: max. 350mm; min. 20mm - Paper weight: 40-250g/sqm - Loading capacity: 500mm - Output: max. 30,000 cycles/h - Electricity: 230V/50Hz - 1.5kW - Dimensions: 1,800x890x1,400mm (without display) - Weight: 550kg Horizon ED-40 Standing arch delivery - Use: for folded small formats with counting function for offset printing - Format: min 20mm max 110mm - Compatible with: Horizon KTU-35 Horizon AF-406; AF ...

3 MONTHS WARRANTY Offer consisting of: - Pocket Folding Machine AF-406A - Flat pile feeder - Standing arch delivery ED-40 Horizon AF-406 A 6-Pocket Folding Machine - Parallel Break Rolling Condition: - Technology: Touch & Work - Memory Fold Types: 13 standard fold types pre-programmed - Job memory: 200 memory slots for repeat jobs - Number of pockets: 1. Folder: 6 pockets -Format: max. 400x650mm; min. 100x50mm - Fold length: max. 350mm; min. 20mm - Paper weight: 40-250g/sqm - Loading capacity: 500mm - Output: max. 30,000 cycles/h - Electricity: 230V/50Hz - 1.5kW - Dimensions: 1,800x890x1,400mm (without display) - Weight: 550kg Horizon ED-40 Standing arch delivery - Use: for folded small formats with counting function for offset printing - Format: min 20mm max 110mm - Compatible with: Horizon KTU-35 Horizon AF-406; AF- ...

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

The horizontal CNC machining center with a magazine for 60 tools, model CW-1000, is designed for complex boring and milling. It can handle parts (including fixtures) with maximum dimensions (length x width x height) 1200x1000x1000. Contents of delivery: - bed, column, frame - protection along the X, Y, Z axes - tool magazine manipulator type for 60 tools - rotary table - workpiece changer (2 pallets) - ball screws and rolling guides on the X, Y, Z axes - guides protection - spindle 4200 rpm, power 30 kW, SK50 - coolant supply through the spindle, pressure up to 50 bar, replaceable filters up to 25 microns - reducer - motors on the X, Y, Z, B axes, manufactured by Siemens (Germany) - main drive and feed drive: digital drives of the “SINAMICS S120” series - automatic lubrication system - hydraulic system - belt chip conveyor with coolant pump - lighting of the c ...

Manufacturer: HUTA ZIGMUNT, Poland Serial No. 167931/2, year of issue 1966 Dimensions LxWxH: 14340x5950x4540 mm, weight 403000 kg Basic data: Straightened sheet thickness - 12-30 mm Straightened sheet width - 3000 mm Material yield strength – 80 kg/mm2 Dressing speed - 12 m/min Working rollers: - 7pcs, f 500mm, L barrels - 3550mm Pitch between the axes of the rollers - 510mm Support rollers: - 10pcs, f500ii, L barrels - 670mm Guide rollers - 2 pieces Main drive motor: AK 112-8, 160 kW, 730 rpm. Top bed travel speed - 16.2 mm/min Bearings: working and supporting rollers - rolling The machine is reversible.

For Sale Miller 112 CS welding machine Equipment for welding the sealed materials . A thermal type (hot air) of welding is used, including a dosed heating of the edges of the material being welded, followed by rolling with special rollers. The material can be hold in place via suction under the table The materiaal can be located via Laserguid The device is designed to proform welding work according to different schemes: welding overlap, butt welding, making pockets, trimming, ect. Inclusive gutter for material and waist As the following materials can be used Frontlit, Mesh, Backlit, etc. The device is designed for welding strips up to 9 meter Main characteristics: maximum seam aprox 9 meter Jointwidth 2 inch (5cm) Welding Temperature 25-730 cel. Welding speed up to 20 cm/s Types of welding nozzles welding with lap and butt Production Pockets of give ...

DMS 90 CNC M3 Tube and Profile Bending Machine Max. Tube Outside Diameter: Ø90 mm Max. Wall Thickness: 4 mm Max.Bending Radius: 300 mm 6 meter pipe loading capacity Pipe cutting system STEP IGES drawing program Rolling system Many tools are included More details: https://doganermak/detay/dms-90-cnc-m3-PR52

Vessel rotating device, vessel rotating device, welding rotating device, welding rotating device, welding device, welding rotating table, welding rotating device -Container rotating device: Welding rotating device on rail chassis -Drive motor: 7.5 kW -Load capacity: 60,000 kg -Roller spacing: 990 - 2120 mm, wheels Ø 560 x 580 mm -Rolling speed: 0.10 to 3.35 m/min right/left running -Program control device: with hand control and foot pedal -Rail width: internal dimension 1985 mm -Transport dimensions: 3860/2635/H975 mm / 3625/3070/H975 mm -Weight: 6680 kg / 3700 kg

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

20V MAX XR® 1/2" (13mm) Cordless Impact Wrench delivers up to 600 ft-lbs of maximum locking torque and 800 ft-lbs. maximum breaking torque where power is needed in compact spaces. This unit includes the WrenchTM Precision feature to give the user overall control to help avoid over-tightening forward and rolling the die in reverse. The lightweight and ergonomic design allows this unit to complete a variety of applications. This unit is sold with charger + 20v battery (Photo)

rolling capacity max.: / t workpiece diameter: / mm workpiece length: 1000 mm Control: Siemens 840 D X1, X2-axis travel: 1260 mm Z1, Z2-axis travel: 90 mm Y1-axis travel: 320 mm Y2-axis travel: 800 mm Q-axis travel: 215 mm X1, X2-axis speed max.: 28 m/min Z1, Z2-axis speed max.: 3 m/min Y1-axis speed max.: 30 m/min Y2-axis speed max.: 60 m/min Q-axis speed max.: 30 m/min module: 0 / 3-2,5 profile width: bis/upto 180 mm pressure angle: 25-45 ° total power requirement: 63 kVA weight of the machine ca.: 17,85 t dimensions of the machine ca.: 6,5 x 5,68 x 2,553 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 Modul min. module: 1 Control: Siemens 840 D PowerLine table diameter: 1200 mm table load: 15 t total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5 x 4 x 3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjust ...

weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors maneuver. The transport can be carried out with low rolling resistance will. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mm gear width: 350 mm max. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mm table diameter: 1200 mm table hole: 300 mm control: Siemens 840D Powerline total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 5x3x3,8 m Gleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process. Special version with hydraulic shaping head H1 SCOPE OF EQUIPMENT: - Basic machine P1200S, Siemens 840D Powerline (XP) - Hydraulic shaping head H1 - Signal light (3-colour) - Extended software for fault diagnosis - Telephone diagnosis system - Chip disposal through table b ...

Used Capsuling Machine Nortan Prisma Spinning Heat Shrinkable 6 heads year 1999 8000 bph NORTAN capsuling machine with 6 thermal heads for PVC and 6 rolling heads for polylaminate Production about 8 000 hours on PVC and about 5 500 on polylaminate Capsule magazine with inclined tray Bottles entry from the left Year 1999 branded C E In excellent condition [...for more information send your inquiry to the seller.] refno: CA45

Used filling monoblock for Oil and spirits Polaris model B6 speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits We summarize the main characteristics of our used filling monoblock and which make them UNIQUE on the market Elasticity of work that allows you to switch from one bottle format to another Acting with simple operations and without replacing parts of the machine this flexibility is also particularly suitable for those who carry out the third party Speed of the format change that can be carried out from 10 to 30 minutes at the most Given the reduced times the line can be easily used even for small production batches Use of any bottle format cylindrical square triangular amphorae flasks etc from 0 100 to 2lt in glass and PET We designed our labeling system in such a way as to guarantee the maximum laying precision on each type of bottle Lines B6 Can Be Composed  ...

Used Capsuling Machine Nortan Prisma 2003 The Nortan 8 8 8 capsuling machine from 2003 is a powerful and reliable machine With a voltage of 380 V and an absorption of 12 kW it has a mass of 3200 kg and is completely overhauled and guaranteed It has a clockwise machine input sense and an onboard PLC with analog keypad With a long autonomy magazine the capsuling machine can work continuously with heat shrinking caps rolling polylaminate and sparkling capsulone The rotary carousel has 8 plates and has a footprint of about 4 meters including a series of equipment used for 0 75 bottles of still wine The Used Capsuling Machine Nortan Prisma has accessories for 5 different bottle formats capable of handling 190 mm and 370 mm high bottles The maximum speed on shrink capsules is 8000 bph 6000 bph on tin capsules and sparkling wine capsules The times for the overhaul depend on the availability of  ...

Used Capsuling Machine Nortan Prisma 1996 The used Nortan capsuling machine from 1996 is an excellent choice for those looking for a reliable and performing machine With 4 heat shrinking heads and 4 rolling heads the rotating capsule picking system allows you to work efficiently reaching a production of 3000 pieces per hour on shrink wraps and 2000 pieces per hour on rolls Powered by 380 volts and with an absorption of 7 kW at 50 Hz it weighs 1250 kg and the machine enters from the left ie clockwise The dimensions of this used capsuling machine nortan prisma are 2 5 meters long 1 8 meters wide and 2 4 meters high It is also sold with a series of equipment for a cylindrical bottle and both seen and liked and overhauled and guaranteed This used Nortan capping machine is a perfect choice for those who want a reliable and high performance machine for the production [...for more information s ...

Used Capsuling Machine Nortan Unicap 35T Aurora 1999 Machine with clockwise rotation equipped with a single heat shrinking head for thermal capsule and 4 rolling heads for polylaminate tin capsule Machine that reaches 2200 pieces per hour It has an automatic tray pick up system linear pick up system with a capsule glass that is made every time on the basis of the customer s capsules It can be delivered both seen and liked and overhauled it has been detached and is in perfect working order Machine that has the analogue operator panel on the right side with the push button panel On the left side the automatic capsule picking warehouse Closed Boxed Conveyor Belt 82 5 x 82 5 Auger with adjustments at the entrance Sold with a bottle format and a complete capsule format [...for more information send your inquiry to the seller.] refno: CA63

Sawblade tiltable: 45 ° Length of the rolling table: 1.400 mm cutting width: 1.000 mm Motor output: 5,5 kW Cutting height: ca. 155 mm Saw blade diameter: 450 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca. 700 kg : Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/60-40 J-EB 2/20 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty

Compact pretzel long roller with croissant winder and feed belt Universe Kasper Model: LWT 3/60-30 J-EB 2/20 for all rods and pretzel sticks, etc. Universal - Combi Winding Machine for all doughs for wrapping and long rolls Longitudinal width 600 mm for pretzel strands Total efficacy over 2 levels Dough filler from 25 - 180 grams Stainless steel version with step flap with EB2 feeder with centering device and pre-rolling for bread roll lines with transverse discharge DGUV V3 tested with sling table hold flap Connection 400V, 16A-CEE plug Approx. dimensions: 1600 x 700 x 1800 mm, WxDxH Used machine overhauled with 6 months warranty Many more winding machines in stock!

Fritsch Rollfix Model: 30WK650 Rollfix Manual dough sheeter for all doughs for rolling out and touring Stainless steel with manual and foot gear Belt width 650 mm Bottom table with printing board with tow for impact for long scooters Infinitely variable roller adjustment New belts and wiper blades Machine mobile with 2 brakes DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled 6 months warranty Many more TOP sheeters in stock!

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

ROLL DIAMETER 400mm POLL WORKING LENGTH 1000mm MOTOR POWER 45 KW DIMENSIONS: 447118501760 (L×W×H) SPEED RATIO OF ROLLS 1:1,27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped wit ...

roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - Safety brake for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for variabl ...

N 1 UNION die, used for the extrusion of a profile for 60 mm diameter shutters, complete with screw and asynchronous motor 380 V, 7.75 KW, with six gears. Changed cylinder and screw in 1985. Replaced screw in 2015. Construction year 1976. Capacity : 30 kg/h in 3rd gear. N 1 TEM electrical panel, used with six zones with thermoregulators and thermocouples by Scotti Instruments s.p.a. N 1 Automatic equipment, used, for P.V.C. profiles rigid brand CERRINI type C.P. 80/PW complete with calibrator holder plate with vacuum pump with 4.1 KW motor, towing unit, cooling unit with fan with 0.75 KW motor, punching unit, stick stop punching unit, cutting unit and automatic tilting unit of mt. 6. Complete equipment for rolling shutter rigid pvc profile extrusion (produced in 1995) N 1 complete chain of resistances N 1 steel calibrator Complete equipment of rigid pvc profile extrusion for shut ...

V Mixer with 1.000 liters stainless steel breaker NEW Description This type of mixer is driven by a motor-reducer that acts directly on the axis of rotation, rolling at the revolutions necessary to obtain a perfect mixing. The V mixer develops a smooth and fluid mixing process of solid / solid in any percentage and solid / liquid in the form of powder or granules and with different specific weights. Due to its shape, it creates axial currents inside it that separate and join the material to be mixed and which, together with the radial action of the mixture, results in a fast and homogeneous mixing without using deflator blades or other mechanical devices. Capacity: 1,000 liters. Reduction motor power: 3 kw. Breaker motor power: 1.5 kW. Applications: for the industries of FOOD, PHARMACY, COSMETICS, COLORS, FEEDS, ABRASIVES, FERTILIZERS, DETERGENTS, PLASTICS, INSULATORS, PULVIMETALURGY A ...

max. wheel diameter: 1200 mm gear width: 1000 mm max. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 t total power requirement: 75 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,5x4x3,75 m Gleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference. Remark: Machine designed for external milling, large milling head M3. Machine with counter stand. Scope of equipment: - Basic machine P 1200, Siemens 840D PowerLine (XP) - Motorised milling head M3 - Special speed series motorised milling head M3 - Extended software for fault diagnosis - Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor - Set of adjusting wedges - Dialogue program Milling in single-part process - Sw ...

Offer 24031 Specifications: - Manual operation + CNC controlled operation - Max. working width 1040 mm - max. material thickness at 40 kg strength per mm² 4.00 mm - Upper roll diameter 100 mm - Rear roller diameter 100 mm - Upper roller can be swung out - Asymmetrical roller arrangement - Rear roller can be tilted for conical round - Lower roller + rear roller with wire groove - Upper + rear rolling mot. driven - Working speed 5.5 m/min - Swivel control panel with CNC control - E-foot switch - Drive 400 V / 1.10 kW - Space requirement approx. W 2000 x H 1250 x D 850 mm - Weight approx. 850 kg -Operating instructions

useable stroke: 30 mm rivet shank max: max. Ø 6 mm throat: 130 mm spindle turning speed range: 1400 U/min quill stroke: 45 mm table surface area: 284 x 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Roll riveting machine with safety device for low-noise rolling riveting of all types of rivet heads. The rivet stopper is mounted at an angle in the roll rivet head on roller bearings so that it can tumble freely regardless of the rotation of the head. Fast and powerful movement of the roller rivet head thanks to a directly pressurized compressed air cylinder. Force requirements can be adjusted steplessly. Manual availbale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 3200 mm cutting width: 1100 mm Motor output: 5,5 kW Cutting height: mm Cutting height at 45°: mm Saw blade diameter: 450 mm Speed: U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6800 € : 140.76 € : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Barberan - semi-automatic line for the production and lamination (Honeycomb) of boards equipped with a double-sided PUR hot-melt glue coating machine. The line is ideal for the production of honeycomb panels or furniture doors and for the lamination of all types of films such as PVC, PP, CPL or HPL. The maximum capacity can only be quantified by a specific product. For example, if we talk about doors, the maximum flow rate is two doors per minute. The maximum size of the boards is 1280 mm wide, 2800 mm long and 90 mm high. The rolling process is more continuous and the theoretical production capacity is several million square meters per year. In operation 600 hours. You can see it in operation before disassembly, Seller can arrange transportation.

Inv. Num. : 5762 Type: XZPP 80/8 Producer: UNICORN-ESK Created: 2004 Parameters: Profile cross-section: 80 mm Maximum sheet thickness when rolling: 8 mm Total power requirement: 4 kW Standard pulley diameter: 250 mm Length: 1150 m Width: 1120 mm Height: 1365 mm Weight: 1900 kg

Key data: 560 mm, 260 mm, 4000 1/min

MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...

Pneumatic clamping. Manual adjustment of the roller spacing. Foot pedal included. High-pressure air line is needed for operation or a smaller compressor. The device is easy to move and transport to external workstations. With a simple extra rolling stand, the load capacity is doubled.

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Sawblade tiltable: 45 ° Length of the rolling table: 3.000 mm cutting width: 1.000 mm Motor output: 11 kW Cutting height: ca. 173 mm Saw blade diameter: 500 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca. 1.000 kg : Ja : Nein : Digital : Digital : Tip-Servo output: kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.270 mm Motor output: 5,5 kW Cutting height: ca. 103 mm mm Saw blade diameter: 350 mm Speed: 4.000 U/min. weight of the machine ca.: ca. 800 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Capsule applicators, shrinkers and rollers - Formats: 30 pieces, diameter 62 -108 mm - For thermal capsules, tin capsules and polylaminate capsules - High-performance touchdown - Magazine, for great autonomy - Turret, with 8 rolling heads and alternating 8 shrink heads - Running direction left – right

Description: SPECIFICATIONS Character: Goyar Type: IE-40/25 Machine weight: 38,500 kg Mechanical: Yes Roller length: 2,500 mm Sheet thickness: 50 mm Number of rolls: 3 Upper roller diameter: ø530 mm Bending capacity: 40 mm Rolling speed: 4 m/min Electrically driven: Yes Power of main motor: 70 kW weight approx.: 38,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 7,000 x 3,100 mm

Max. bending length: 1500 mm Max. sheet thickness: 10 mm steel Upper roll diameter: 195 mm Includes rollers for rolling flat steel Clockwise and anticlockwise rotation via hand-held control unit

Used spiral mixer Kemper SPL 75 for the production of high-quality doughs. The machine can be switched slowly and quickly with 2 levels in automatic mode via 2 timers. The boiler, spiral and tool are made of stainless steel. Boiler can be switched with right and clockwise rotation. The machine is immediately available in the warehouse in Bielefeld. Machine is with new wear parts and repainted Machine completely redesigned -the following parts are renewed, buttons, clocks, ball bearings, V-belts, seals, Cable and machine repainted -2 speeds slow and fast -2 timers, automatic switch-on and switch-off - with plastic flour dust cover -Boiler, spiral and guide rod made of stainless steel -Push-button control -Boiler capacity approx. 175 litres -Bowl diameter inside 76cm, kettle height inside 44cm -Boiler right counterclockwise rotation - Manual and automatic switcher - Machine  ...

Sawblade tiltable: 45 ° Length of the rolling table: 2.800 mm cutting width: ca. 1.100 mm Motor output: 7,5 kW Cutting height: ca. 153 mm Saw blade diameter: 450 mm Speed: 3/4/5/6.000 U/min. weight of the machine ca.: ca 1.000 kg : Ja : Ja : Hydraulisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We have for sale used RADEMAKER CRUSTO BREAD LINE WORKING WIDTH 600 MM. The line is rarely used and in good condition. Been in storage for the last 6 years waiting to go into production again but because the factory changed its mind it is now being sold. The conveyor belts have been removed, they have hardened in storage. Otherwise the line has been checked and everything is working. Product specification: Products capacity for example. Niittypitko ( A long Finnish bun ) 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku ( sweet bun ) 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system  ...