rolling mill used for sale

Batch of milling and sawing tools, consisting of various milling heads, knife heads, saw blades, holders and smaller milling tools. Auction-ID: A1-41279-266

Batch of sawing and milling tools, consisting of various saw blades, milling heads, knife heads and holders/flanges. Auction-ID: A1-41279-254

OKUMA - MacTurn 50 Offer details Stock number 1039-9061 Machine type: CNC turning and milling center Manufacturer OKUMA Type MacTurn 50 Year of construction 2000 Control OSP 7000 L Storage location D-59302 Oelde Country of origin: Japan Delivery time by arrangement Freight base from location Additional information CNC - Turning and milling center OKUMA - MacTurn 50 Technical details max. turning diameter 580 mm Turning length 1500 mm Control OSP 7000 L Circumferential diameter over bed 610 mm Circumferential diameter over carriage 580 mm Main spindle: Speed range - main spindle 12 - 2,800 rpm/-1 Spindle bearing diameter 150 mm Spindle bore 110 mm Spindle nose JIS A2-11 Drive power - main spindle 37 (30) kW C-axis 0.001 ° Travels: x-axis 598 mm y-axis 230 (+110 / -120) mm z-axis 1,660 mm Feeds: Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: ...

Auction-ID: A1-49001-9

including: collets, clamping tool, SK-40 tool holders, 1 boring head Auction-ID: A1-49001-10

Pehu CNC-besturing 5500 mm invoerrolband met CNC-positionering Admission in spindle (cone x): Mk4 Max drillingdepth: 180 mm Max drillingcapacity: dia 32 mm THROAT DEPTH DRILLING-SPINDLE: 550 mm Speeds: 55 > 5000 rpm Digital read-out: Pehu CNC positioning Motor power: 3 kW

x-travel: 3500 mm y-travel: 1000 mm z-travel: 900 mm Control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: 10770 x 4100 x 3150 m Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel mill on structure with 4 wheels. Motor 5 kW 220/380 V 50 Hz 1,430 rpm Transportation Information Length 1350 mm Width 800 mm Height 1800 mm No documentation In its state.

Soft breaker made of stainless steel. Technical characteristics Motor 1.1 kW 50 Hz 1,500 rpm No documentation. In your state

RIMSA-3 crown mill made of stainless steel. Mounted on a stainless steel structure equipped with: -Loading hopper with auger for dosing -Bag filter to collect dust -Discharge hopper with butterfly valve -10 hp engine at 3,000 rpm -Electrical panel with control panel -Start button for the mill, stop button for the mill -Gear button for the auger, stop button for the auger -Emergency mushroom Reset button Rotary knob ON/OFF Technical characteristics: Chainring diameter: 315 mm Maximum rotor rotation speed: 4,500 rpm 10 HP engine at 3000 rpm No documentation In your state

ATEX immersion ball mill manufactured by Oliver and Batlle model HCP-1. Equipped with control panel. Technical characteristics Year of manufacture 2004 Motor 7.5 kW ATEX Working Conditions Transportation Information Length 1800 mm Width 1100 mm Height 1800 mm Documentation Operation Manual Plans In your state

Crown mill made of iron equipped with control panel and converter The auger has a frequency converter With documentation Year of manufacture 2014 Motor 18.5 kW In your state

Used ball mill manufactured by LLEAL model ROTORMILL MH 45 Technical characteristics Ball diameter 2 mm Transportation Information Length 2000 mm Width 1800 mm Height 2100 mm Documentation Operation Manual In your state

Second-hand continuous micronizing mill manufactured by BUHLER. Technical characteristics VWEG Motor 400 V 65.2 A 37 kW 75 Hz 4450 rpm No documentation In your state

Second-hand ball mill manufactured by LLEAL. Model 45 Includes dashboard. Documentation: CE + EEx Installation, Service & Maintenance Manual Drawings Technical characteristics Ball diameter 2 mm ATEX Working Conditions Transportation Information Length 2000 mm Width 1700 mm Height 2100 mm Documentation CE Certificate ATEX Certified Maintenance Manual Operation Manual Plans In your state

Used BOMATIC B1000S grinder mill. Cutting area features: Number of blades: 27 Blade cutting width: 36 mm Cutting area dimensions: Length 2500 mm Width 970 mm Height 400 mm Hopper Dimensions: - Length 1750 mm - Width 1500 mm - Height 900 mm Technical characteristics Year of manufacture 2006 Machine motor 37 kW - 1500 rpm kW Auxiliary equipment and peripherals Hydraulic power plant Transportation Information Length 2600 mm Width 2250 mm Height 2350 mm Weight 2800 Kg Documentation Maintenance Manual Operation Manual Plans Electrical diagrams In your state

Stainless steel mill on structure with 4 wheels. Motor 5.5 kw 1445 rpm 50 hz 380 v. Lower outlet height 620 mm Transportation Information Length 1250 mm Width 700 mm Height 1900 mm No documentation In your state

INTOS ?ebrák FN 20 Fräsmaschine Universal + Zubehör Hersteller: INTOS ?ebrák Typ: FN 20 Zustand: gebraucht Baujahr: 2003 Gewicht der Maschine: 910 kg Abmessung: ? Länge mm: 1690 ? Breite mm: 1270 ? Höhe mm: 1175 Aufspannfläche des Senkrechttisches: 216 x 680 Aufspannfläche des Winkeltisches: 240 x 600 Die breite und Abstand der T-Nuten mm: 12H8 x 45 0,1 Spindeldurchmesser im Vorderlager mm: 45 Spindelkegel: ISO 40 Spindeldrehzahlen: 18 Bereich U/min: 50 ? 2000 Vorschübe : 18 Bereich mm: 8 ? 400 Eilvorschub mm/min: 1340 Bewegung des Spindelstockes: ? von Hand: 200 ? selbstständig: 190 Durch Verstellung des Halters erzielte Auslegung mm: 42 Tischlängsbewegung: ? von Hand mm: 300 ? selbstständig mm: 290 Senkrechtbewegung des Tisches: ? von Hand mm: 350 ? selbstständig mm: 340 Lieferumfang: ? INTOS ?ebrák FN 20 Fräsmaschine Universal ? Zubehör  ...

DECKEL FP1 Aktiv Fräsmaschine Hersteller: Deckel Typ: FP1 Aktiv Zustand: sehr gut Steuerungsart konventionell Steuerung Aktiv HEIDENHAIN TNC X-Weg 300 mm Y-Weg 160 mm Z-Weg 340 mm Werkzeugaufnahme SK40 Drehzahl 40-2000 U/min. Steuerung Aktiv HEIDENHAIN TNC Gesamtleistungsbedarf 2 kW Maschinengewicht ca. 0,73 t Raumbedarf ca TBH 1200x1100x1600 mm

Blade mill manufactured by MATEU & SOLE with a power of 3 hp Sieve length 250 Engine speed 1420 Maximum mill speed 700 rpm Transportation Information Length 850 mm Width 480 mm Height 1200 mm No documentation In your state

Universalfräsmaschine Deckel FP4M Aktiv Hersteller: Deckel Typ: FP4M Zustand: gebraucht, gut Digitalanzeige: 3 ? Achsen- Digitalanzeige Heidenhain Verfahrwege: X ? Achse: ca. 500 mm Y ? Achse: ca. 400 mm Z ? Achse: ca. 400 mm Tischaufspannfläche: ca. 700 x 400 mm Drehzahlbereich: ca. 50 ? 2500 U/min Werkzeugaufnahme: ISO 40 Werkzeugklemmung hydraulisch Antriebsleistung: ca. 6,0 kW Vorschübe & Eilgänge: in allen 3 Achsen Vorschubbereich: ca. 8 ? 630 mm/min Eilgänge: ca. 3,0 m/min L x B x H: ca. 2300 x 1800 x 1800 mm Gewicht: ca. 1750 kg Maschinenleuchte Spindelschutz Lieferumfang: ? 10x Werkzeugaufnahmen ? Hochdruckschraubstock Allmatic ? Dokumentation ? Spindelschutz

Vertical grinder mill made of stainless steel (parts in contact with product) with a total capacity of 50 liters. Equipped with control panel: Selector Auto-Man Timer Potentiometer for speed control Gear Button Stop button Tip button Straighten button Disposal motor: 18.5 kW 2920 rpm 50 Hz 220 V Motor for tipping: 0.25 kW 1350 rpm 50 Hz 230 V Body dimensions: Inner diameter 400 mm Internal height 395 mm Transportation Information Length 1115 mm Width 1050 mm Height 1650 mm No documentation In your state

Fräsmaschine Macmon M 434 NC Hersteller: Macmon Typ: 434 NC Steuerung: Heidenhain TNC 124 Baujahr: 2008 Zustand: gebraucht X-Achse: 400 mm Y-Achse: 250 mm Z-Achse: 400 mm Aufspannfläche 600 x 320 mm Hauptantrieb: AC-Motor kW 3 Drehzahlbereich: Vertikal stufenlos 30 ? 6300 Horizontal stufenlos 0 ? 4200 ? Vorschub 0 ? 10 m/min Werkzeugaufnahme ISO 40 Betriebsspannungn 400 / 50 Volt / Hz Steuerspannung 24V Gewicht 1200 kg Lieferumfang: ? Dokumentation ? Maschinenfüße ? Kühlmittelanlage ? Spindelschutz ? Maschinenleuchte ? HR410 Handrad ? Horizontalspindel Gegenhalter

Kunzmann WF 7 CNC Fräsmaschine TNC 410 Steuerung Hersteller: Kunzmann Typ: WF 7 Baujahr: 2001 Zustand: gebraucht, unter Strom Steuerung: Heidenhain TNC 410 X-Weg 610 Y-Weg 400 Z-Weg 400 Aufnhame SK 40 Drehzahl 1-5000U/min Kipp/-Schwenktisch Lieferumfang: ? Unterlagen ? Diverse Werkzeugaufnahmen

Kunzmann WF 600 M Fräsmaschine (2012) Hersteller: Kunzmann Typ: WF 600 M Baujahr: 2012 Zustand: gebraucht, sehr gut Steuerung: Heidenhain TNC 124 X ? Achse 600 mm Y ? Achse 400 mm Z ? Achse 400 mm Tischlänge 650 mm Tischbreite 350 mm Spindeldrehzahl 4500 U/min Vertikalpinole und Horizontalpinole ? SK40 Hydraulisches Anzugssystem Hauptantriebsmotor: 5,5 kW Abmessungen ca.: 2 x 2 x 2 m Gewicht ca 2000 Kg Kühlmittelanlage Lieferumfang: ? Dokumentation ? Maschinenleuchte ? Maschinenfüße ? Maschinenschraubstock

Kunzmann WF 4/3 Fräsmaschine TNC 320 Hersteller: Kunzmann Typ: WF 4/3 Fräsmaschine Baujahr: 2009 Zustand: gebraucht, aus Lehrwerkstatt, gereinigt und unter Strom, vorführbereit Spindelstunden: 2.542h x-Weg: 400 mm y-Weg: 350 mm z-Weg: 400 mm Werkzeugaufnahme SK 40 Spindeldrehzahlen 1,0 ? 4.500 U/min Vorschübe 0 ? 2000 mm/min Pinolenhub 60,0 mm Tischgröße 650 x 350 mm T-Nuten 14 H7 Steuerung TNC 320 Motorleistung 5,5 kW Gewicht 1920 kg Raumbedarf ca. 2000 x 2000 x 2100 mm Gesamtleistungsbedarf: ca.7 kVA Zentralschmierung Kühlmitteleinrichtung CE-Konform Lieferumfang: ? Technische Dokumentation ? Vollschutzkabine ? LED Maschinenleuchte

Cross-section milling machine Festo Universal profiling cutter Type: UP 65 Milling finger tines and finger joints Cross-profiling in endless cycle succession Milling depth maximum 65 mm Maximum working height 100 mm Tool clamping width 200 mm Support table length x width 657 mm x 272 mm Motor power 7.5 kW Speed of the milling spindle 4,300 rpm Tool flight circle maximum 250 mm Milling spindle diameter 40 mm Cutting speed 56 m/sec. Working cycles maximum 8 per minute Air consumption per work stroke 14 NI (standard liters) Cutting cross-section per stroke maximum 60 cm² Air requirement 20 m³/min. Extraction connection 1 x 250 mm x 140 mm, 1 x 120 mm diameter Speed of table movement up and down can be regulated Weight: 300 kg L x W x H : 850 mm x 700 mm x 1,170 mm

Machine is already ready for transport and can be assessed on viewing day. Workbench with magnetic plate and milling tool not included Auction-ID: A1-48648-9

Machine ready for transport Auction-ID: A1-48649-17

machine ready for transport and to be assessed on viewing day. Machine clamp not included Auction-ID: A1-48648-105

• Type of machine: Universal tool milling machine • Control: Heidenhain TNC 114B (positioning control / simple CNC) • Travel (X/Y/Z): approx. 560 / 500 / 400 mm • Table size: ± 800 × 460 mm • Spindle holder: SK40 • Speed: 40 – 4000 rpm • Feed rate: 2 – 2000 mm/min • Quick displacement: ± 3500 mm/min • Pinole stroke: 90 mm Auction-ID: A1-48648-30

feed X-axis 5000mm/min feed Y-axis 7000mm/min. Machine already ready for transport, machine to be assessed on viewing day. Needed for transport 1x low-loader and 1x curtain-sided trailer Pick up machine by appointment machine already ready for transport and to be viewed on viewing day for correct assessment Auction-ID: A1-48648-90

met spanentransportband Longitudinal travel X-axe: 1050 mm Crosstravel Y -axe: 560 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 1400 x 550 mm Power on spindle: 9 kW Max speedrange: 10 > 6000 rpm Control: Fanuc O-M ACCESSORIES & TOOLING: toolchanger, 32 positions

Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system

Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

ABENE VHF 360 TI ist eine CNC Fräsmaschine für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 1200x450 mm, Wege X650 Y480 Z475 mm, max. Werkstückgewicht 400 kg, Pinolenhub 75 mm, Schwenkbereich 0–140°, Aufnahme ISO40. Technik: stufenloser Spindeldrehzahlbereich 55–4000 t/min, Vorschübe stufenlos bis 4000 mm/min (X/Y) und 1500 mm/min (Z), Frässpindelmotor 7,5 kW, Gesamtleistung 14 kW, 3x400 V 50 Hz, Maschinengewicht ~2300 kg, Platzbedarf 3000x3000 mm. Zubehör: Bohrspindel, mechanische Handräder, Kühlmitteleinrichtung, Maschinenlampe. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

DECKEL FP1 Universal Tool Milling Machine - Overhauled in 1999 by HARICH Equipped with work table, machine vice and separate control cabinet Tool cabinet with various tools, milling cutters, clamping devices, tool holders, drills and other machine accessories Instruction manual and technical documentation are also available Auction-ID: A1-49712-12

Cutting edge milling machine type BU/FR 90-3 for machining and post-processing of cut edges Industrial version with separate control panel and digital display Technical data Manufacturer: Reichel GmbH / Bubenheimer Maschinen Machine: Cutting Edge Milling Machine Type: BU/FR 90-3 Year of manufacture: 1990 Factory No.: 9545 Power: approx. 2 kW Electrical connection: approx. 400 V / 50 Hz / PE Separate control panel Digital displays Emergency stop Workpiece guide / stop available Extraction system: HOLZKRAFT Transport dimensions control (L × W × H): approx. 800 × 500 × 1,100 mm Transport dimensions extraction (L × W × H): approx. 800 × 400 × 1,800 mm Auction-ID: A1-49712-7

ASSFALG edge milling machine type KKF 4 for machining and milling workpiece edges Compact tabletop machine with large, transparent protective cover and two selectable speeds Auction-ID: A1-49712-9

ASSFALG edge milling machine type KKF 4 for machining and milling workpiece edges Compact tabletop machine with large, transparent protective cover and two selectable speeds Auction-ID: A1-49712-33

Equipment: - ELESTA digital display - Feed infinitely variable - Coolant system - Horizotale milling device - Chip protection - Chip trays - hydr. Vise - Machine light - Documentation x-travel 1200 mm y-travel 400 mm z-travel 460 mm Table size 1500 x 400 mm Conventional control Mounting SK40 Speed range 45 - 2000 rpm Quill stroke yes mm Total power requirement kW Machine weight approx. 3.2 t Dimensions L x W x H 2.8 x 2.5 x 2.1 m Auction-ID: A7-49782-441

We have original spare parts (OEM) for FLSmidth/FULLER vertical roller mills: Spare parts for Fuller ATOX 25 mills, ATOX coal mill spare parts, spare parts for Fuller OK 39-4 cement mills PFISTER DRW rotor dispensers, rotary furnace burner, spare parts for vertical mills (VRM), grinding rollers, grinding tables, segments, separator parts, hydraulic cylinders, gearboxes for vertical mills, nozzle rings, consumable parts for cement mills, roller conveyors, motors, ABB inverters; about 2000 tons of parts available. Quoted price per ton of parts.

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Table dimensions: 5000 x 2000 mm Auction-ID: A7-32339-6

We have original spare parts (OEM) for FLSmidth/FULLER vertical roller mills: Spare parts for Fuller ATOX 25 mills, ATOX coal mill spare parts, spare parts for Fuller OK 39-4 cement mills PFISTER DRW rotor dispensers, rotary furnace burner, spare parts for vertical mills (VRM), grinding rollers, grinding tables, segments, separator parts, hydraulic cylinders, gearboxes for vertical mills, nozzle rings, consumable parts for cement mills, roller conveyors, motors, ABB inverters; about 2000 tons of parts available. Quoted price per ton of parts.

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works