rolling mill used for sale

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Boring spindle diameter: 130mm, tool holder: SK50, centering: 500mm, travel X/Y/Z: 250mm/160mm/380mm, travel W/U: 1000mm/320mm, feed rate: 2m/min, rapid traverse: 5m/min, max. diameter drilling/facing: 800mm/1400mm, torque boring spindle/facing support: 3100Nm/6150Nm, clamping plate dimensions X/Y/Z: 3500mm/1750mm/350mm, weight: approx. 30000kg, controls: Bosch. Including angle head, extension piece, steep taper tool holder for SK50 (without tools), 4x plate fields with the dimensions 1080mm/2000mm and boring apparatus. Documentation available. An inspection on site is possible.

x-axis: 5000 mm y-axis: 4000 mm z-axis: 1400 mm distance between columns: 3500 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5020 x 3000 mm workpiece weight: 16 t Control: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m 5 Sided Machining Center equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - Coolant through Spindle - X/Y/Z axis linear guide way - X/Y linear Scales Heads: -- 90 degree head (auto 5 degree indexing) -- 200mm extension 90 degree head (mounted on table) -- 350mm extension head (mounted on table) - Air conditioner - Oil skimmer - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor  ...

Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

The FrymaKoruma MZM/VK7 is a laboratory and product development–scale toothed colloid mill, emulsifier, vacuum mixer or homogeniser designed for efficient liquid–solid phase refining, homogenizing, dispersing and emulsifying liquid to highly viscous products. It is suitable for the production of creams, ointments, gels, similar formulations or food products. The unit was previously operated in a mayonnaise production facility. The machine is mounted on a stainless steel frame equipped with two wheels, allowing for easy mobility. It features a double-jacketed conical hopper with an approximate working volume of 10 litres. The hopper is fitted with a lid incorporating a scraper agitator (0.09 kW, 380/220 V), a pressure indicator (–1000 mbar to 0 bar), and an inspection light with glass wiper. Two small open side hoppers with manual valves are provided for ingredient dosing. The syste ...

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

x-travel: 1.150 mm y-travel: 710 mm z-travel: 710 mm b-axis: +30 / -120 ° surface area: 1.500 x 795 mm milling head: universal, stufenlos spindle: 28 kW turning speeds: 20 - 18.000 U/min tool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 t dimensions of the machine ca.: 6 x 3,2 x 3,4 m CNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part and small-batch production with swivel spindle, NC dividing head and tool magazine. • NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000 rpm motor spindle • LEHMANN vertical NC dividing head mounted on the machine table for 5-axis simultaneous machining with tailstock • DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouring control • Production package with RotoClear viewing window, 600-litre coolant tank, ...

The machine is in good technical condition, testing is possible by prior arrangement.

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.

The machine is in good technical condition, testing is possible by prior arrangement.

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm table-size: 900 x 530 mm control: Heidenhain TNC 355 tool adaptor: ISO 40 | | turning speed range: 40- 4000 U/min rapid speed: 5 / 6 m/min feed speeds: 2 - 3000 | mm/min | power requirement: 6 kW table load: 350 kg dimensions: 2,6 x 1,8 x 2,2 m weight: 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flour mills Rotormat Bio-200Manufacturer : HommelType : Bio-200GRINDING TURBINE ROTORMATTtype:BIO 200Grinding capacity approx. kg/hour fine80 - 100Grinding capacity approx. kg/hour medium120 - 150Grinding capacity approx. kg/hour coarse150 - 200Natural stone:highly wear-resistant200 mm DiameterPower:3 KW 4 PSconnected load:400 VTrichter capacity:approx. 40 kg GrainWeight:approx. 80 kgDimensions cm:100 x 60 x 135Â For details see pictures.

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

Used hammer mill from Alpine type B 500.

Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.

Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

KOMO GRAIN MILL FIDIBUS CLASSICOur classic with a revolutionary grinder design that ensures the smooth interplay of forces and a pleasantly smooth operation. Solid local beech wood with classic wood mortise on the outside and self-sharpening millstones made of corundum ceramic and powerful 360 watt industrial motor on the inside.360 watts, grinds 100 grams of wheat per minuteSuitable for soft and hard cereals as well as spices, legumes and coffeePerfect for a household size of 3-5 peopleGrinder: Corundum/ceramic infinitely adjustableYou get a

Small but nice! The FIDIBUS 21 grain mill measures just 32 cm in height and can easily compete with the very large grain mills in terms of performance. Perfect for a 1-2 person household.250 watts motor powerSuitable for soft cereals (such as wheat, spelt, rye, einkorn etc.) and spicesGrinds 100 grams of wheat per minute, with coarser setting several times the amountHopper filling quantity: 850 g (wheat)Grinder: Corundum/ceramic infinitely adjustableYou get a manufacturer's warranty from the date of purchase and an invoice with VAT.

3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping device, clamping supports, clamping tool, clamping box, clamping tower -U-profile: steel profile 160 x 160 mm -Interior dimensions: 95 x 125 mm -Length: 800 mm -Weight: 81 kg