rolling mill used for sale

bore capacity in steel (diameter): 20 mm throat: 195 mm bore stroke: 80 mm boring spindle: MK 2 table surface area: 320 x 300 mm total power requirement: 0,75 kW weight of the machine ca.: 0,072 t dimensions of the machine ca.: 0,7 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 6.6 kW 8915 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 35 mm -Dimensions: 520/247/H145 mm -Weight: 41 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

Universal milling head, milling chuck, milling extension, angle milling head -Spare part from an R

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine, upper support -Swallowtail: 86 by 73 mm 14 mm high -Drawing with the photos -Dimensions main part: 132/760/H112 mm -Dimensions intermediate part: 138/324/H55 mm -Weight: 40 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 111 by 134 mm 20 mm high -Drawing with the photos -Dimensions: 290/90/H225 mm -Weight: 12 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.7 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Connection plug broken -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 148 by 178 mm by 30 mm high -Bore diameter: 45 mm -Drawing with the photos -Dimensions: 300/80/H255 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1 kW 17030 rpm at 300 Hz -Voltage: 165 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 280/60/H110 mm -Weight: 4.3 kg

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.

Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Molteni Pearl Mill MS.15 Explosion protected version Grinding tank 15 l Double jacket Power 17,5 kW Very good operational condition, directly from production!

Laboratory mill: Coarse grist mill MIAG from HINZ, Braunschweig Adjustable conical grinder ø 60 mm Drive 0,22kW - 1300 1/min, hinged for quick cleaning, with outlet tank Very solid, older model, can be used immediately

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition

Various grinding stones for Fryma Koruma

Various grinding stones for Fryma Koruma

Various grinding stones for Fryma Koruma

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1050 mm total power requirement: kW weight of the machine ca.: 35 t dimensions of the machine ca.: m Brand: ANAYAK Type: HVM-5000 Build in : 1997 CNC Control HEIDEHAIN, TNC 426 Tablesize: 5000 x 1000 mm X= 4.300 mm Y= 1.200 mm Z= 1.050 mm Toolchanger for 40 tools Tools: BT 50 CNC Controlled head 2,5 degrees Cooling trough the spindle Number of controlles axes: 4 machineweight 35.000 kg Moveable column The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 15 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 9 kg

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg