129,243 used machines on RESALE, but how to find them? Machine Search
Breitenbach fine roller mill type PWF 812 8001200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley Ø650, motor pulley Ø224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h
Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm
Rolling mill 800x800 mm, built in 1988 Roller casing table: 70 mm
Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.
A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible.
A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.
rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using ...
Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.
1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
Thread rolling machine ORT RP18 B 2-roll, overhauled, LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2
Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and
Thread rolling machine, ESCOFIER H20Z, 2-roll, 2 moving heads (in sync), 2 - 20 Ton rolling pressure, workpiece diameter: 75mm max., tool diameter: 140-200 mm, Max plunge width 160 mm, Shafts dia: 69.95, Swivelling: +/-6°,, New: 2003, under power in our warehouse, M i M u machine tools
Inv. Num. : 8649 Type: R16A-II Producer: TSUGAMI Generated: Parameters: Rolling force: 160 kN Max. diameter: 75 mm Max. length: 150 mm Weight: 2500 kg
Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2
A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible.
Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon Capacity: 239.000 TPY Width: 600 – 1320 mm Stainless 304 and 430 Consists of: (2) 'Production Machinery Co.' Annealing and Pickling Lines (Lot 1) (2) 'SMS' 20-Hi ZM Cold Strip Mill (Lot 3, Lot 4) 'SMS' 2-Hi Skin Pass Mill (Lot 5) 'Production Machinery Co.'& Coil Preparation Line (Lot 6) 'Production Machinery Co.' Grinding and Polishing Line (Lot 7) 'Honda' Cut-to-Length Slitting and Shearing Line (Lot 9) 'Honda' Slitting/Recoiling Line (Lot 10) These production lines come from reputable Original Equipment Manufacturers, including two 20-Hi Sendzimir Mills originally from DEMAG-SACK, now under SMS. With a proven track record of performance and meticulous maintenance, these assets represent a remarkable investment opportunity.
ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes
Key data: 650 mm, 2100 mm
W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001
Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.
Key data: 300 mm, 600 mm
Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)
A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.
Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...
This UZMA MAKINA UZH76 was manufactured in 2016. It features a maximum tube diameter of 76 mm, a bending radius of 250 mm, and a wall thickness capacity of 4 mm. The bending angle reaches up to 190° with a speed of 48°/sec. Powered by a 13 kW total motor capacity and a hydraulic pressure of 140 bar. Consider the opportunity to buy this UZMA MAKINA UZH76 plate rolling machine. Contact us for more information.
Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...
This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.
used
Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti
Key data: 1000 mm, 450 mm
Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel
Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power
A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.
Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Type: BW500/420 Year of Make: 1975 Machine Type: Cold Rolling Mill / Strip Rolling Mill Modernization: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel Rolling Mill Year of Make: 2015 Operating Voltage: 3AC 400V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24V Location: Pforzheim
Professional rolling pin, rolling pin, dough roll 40cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 40 cm• Total length: 67 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 30cm NEWâ Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 30 cm• Total length: 57 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 35cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against the loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 35 cm• Total length: 62 cmDetails see pictures
Professional rolling pin, rolling pin, dough roll 25cm NEWâ€â Product description:• New• made of steamed beech wood• turned from one piece• large special ball bearings• special axles, secured against loosening of the handles• Wooden rollers are oiled• Made in Germany• €¢: 9 cm• Length without handles: 25 cm• Total length: 52 cmDetails see pictures
diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100
diameter range 10-24 mm Forging power 7-20 to thread length plunge method 195 mm daylight 160 mm max. pitch 3,5 mm roller bore 80 mm roller width 235 mm roller length 195 mm
diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000
diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500
diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA
diameter range 110 mm max. outside dia. of round pieces 110 mm kind of heating 335 KW
with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450
maximum number of results exceeded
please refine your search
