rolling conveyor used for sale

Conveyorized chamber vacuum packaging machine for industrial food processing, This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vc999-k ...

Prints labels and applies them straight away, This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height., According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/van-oers-lpx-400-print-and-apply-labell er/, Type: Print and apply labeller, Print method: Thermal transfer (ribbon), Application: Blow applicator (air), Construction: On column with conveyor, height adjustable

Labeller that applies a label to the top and the bottom, This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side., It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/top-and-bottom-labelling-machine/, Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Controls: Touchscreen, Construction: Stainless steel frame on adjustable feet

Marel labeller for the top and the bottom of the pack, This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base., It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-top-and-bottom-labelling-machine/ , Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Infeed: Conveyor with adjustable guides, Controls: Touchscreen

Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe  ...

Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available. Asking price: EUR 7,000., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own cont ...

Inclined conveyor for moving product within a food processing line, This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/opvoerband/, Type: Incline conveyor, Belt: With raised wave-shaped side skirts and cleats, Controls: Compact control box on the frame, Construction: Stainless steel frame on castors, open design

Payload: 2000Kg Hoist: DEMAG Electrically movable trolley / hoist see photos for more details Auction-ID: A7-50868-68

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-486

1T 4m chain length see photos for more details Auction-ID: A7-50868-83

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-485

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-487

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-484

Manufacturer: Meiko (Offenburg, Germany) Model: M-iQ B-XL94 GB V6 V8 N68 P8 N8 Serial No.: 10589620 / 2024 Year: 2024 (ordered in 2023, delivered/invoiced in July 2024) Length: 22,300 mm | Direction: right to left Application: pin conveyor washing line for reusable food cups, containers and packaging. Configuration: 4,600 mm inlet, pre-wetting, 2 pre-washes (600 + 800 mm), 3 x 800 mm washes, vibration 800 mm, 800 mm rinse, 200 mm dirty/clean separation, drying 1,300 + 600 mm, 500 mm neutral zone, 3 switchable dryers (600 + 600 mm), cooling 2,600 mm, 2,600 mm outlet. Equipment: GiO integrated reverse osmosis unit, stainless steel condenser with energy recovery, CC Insight with Economy and API REST extraction (RJ45), water/electricity meters, 24 supply strips, Waredose 50 dosing unit, safety devices and light/sound signals in/out, 2 additional emergency stops, 3 programs + 1 ...

in various versions; including tire dimensions. approx. 3850x100 mm; 400V Auction-ID: A1-50542-14

Used Track length: 11000 cm Scissor Tracks Length: 11 meters Scissor roller conveyor (short): 4.2 meters Roller width: 610 mm Web width: 900 mm Roll diameter: 40 mm Heart to Heart: 120 mm Min. height: 800 mm Track height max: 1,150 mm

Roller support (helper), left-hand placement, 4 m long. Used as an auxiliary support for long workpieces, placed on the left side of the machine being served. Ideal for metal constructions and woodworking shops. Checked and ready to work. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-67

Portable aluminium roller support for long workpieces (timber, metal, profiles) when feeding saws, spindle moulders or other cutting/processing machines. Adjustable height, lightweight aluminium construction that is easy to transport, roller on top for smooth sliding of the workpiece, stable support base. Suitable for woodworking shops, metal constructions and material processing workshops. Checked and ready to work. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-68

Used heavy-duty roller support (helper), 2 m long, used as an auxiliary support for long workpieces. Suitable for metal constructions. Technical data: - 8 free-rotating metal rollers - Roller conveyor width: 370 mm - Length: 2000 mm - Adjustable height: up to 900 mm - Supplied with one support leg Ideal for supporting long material or metal when feeding cutting machines. Condition: Used, checked and ready to work Auction-ID: A7-50988-66

Complete custom-made powder coating line from a candelabra/lamp post manufacturing facility. The line includes: • overhead conveyor system; • multi-stage pre-treatment system; • static powder coating robots with complete control system; • electrical and control equipment; • complete filtration and waste management system; • associated equipment and accessories as shown in the photographs. Condition: Condition as shown in the photographs. The equipment is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Documentation: No documentation or user manual is available. Important – dismantling and loading: The equipment is sold EX FOUNDATION. Dismantling and loading are entirely the buyer's responsibility and at the buyer's cost. No dismantling or loading assistance is available on site. Viewing: ...

Portable roller support for long workpieces (timber, metal, profiles) when feeding saws, spindle moulders or other cutting/processing machines. Adjustable height, lightweight construction that is easy to transport, roller on top for smooth sliding of the workpiece, stable support base. Suitable for woodworking shops, metal constructions and material processing workshops. Checked and ready to work. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-69

Used 4-metre roller conveyor (auxiliary roller support / helper) by OMGA. • Auxiliary support for carrying long workpieces in front of or behind a machine. • Suitable for metal fabrication and woodworking shops. • For exact technical specifications and current operating condition, please contact us. Auction-ID: A7-50988-129

Gilles ASC-A 48-32 6 rows 45 centimeters with TR 24 for defoliation with polisher shaft and conveyor belt. With shells for the bottom of the tractor. Remote control available. Auction-ID: A3-46138-17282

Auxiliary roller support (outfeed/infeed roller stand), left-hand version, 4 metres long, model N705/895. • Used as an auxiliary support for long workpieces, positioned on the left side of the machine it serves. • Suitable for metal fabrication and woodworking shops. • For exact technical specifications and current operating condition, please contact us. • new old stock Auction-ID: A7-50988-100

Type: 4 m transfer roller conveyor • Model: N899/2101 • Construction: Aluminum wheel with aluminum driver; aluminum frame guide accepts length and meter sticks easily; includes iron wheel and iron frame sections for durability. • Application: Ideal for supporting material handling near hacksaws or other cutting equipment. Designed for easy integration and manual transfer in fabrication and workshop environments.in very good condition, ready to work Auction-ID: A7-50988-92

Hennig Chip Conveyor for Haas Machines Auction-ID: A1-51014-21

Vibrating Bowl and Dispensing Conveyor Manufacturer: RNA Model: EGS 90 Year: 1999 Serial Number: 99R28653 Characteristics: cap or capsule dispensing Ø 34 x height 9 mm Compliance: CE Overall dimensions: 1600 x 700 x 1200 (W x D x H in mm) Weight: 100 Kg Auction-ID: A1-51057-26

in various versions; including tire dimensions. approx. 5000x120 mm; 400V Auction-ID: A1-50542-15

Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport

length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Wire belt with variable adjustable speed., Min speed +/- 4 m/min, Max speed +/- 12 m/min., Belt width: 600 mm, Belt length: 1000 mm, Power: 3 x 400V, 50Hz, 0.37kW, Dimensions: 1050 x 950 x 1400 mm, Weight: 125 kg