135,491 used machines on RESALE, but how to find them? Machine Search
Sicko return conveyor for returning workpieces to the operator after processing on (for example) multi-blade saws or planers. Compatible with the multi-blade saw (1328-400217). Technical data: Length: approx. 6,000 mm Width: approx. 2,900 mm Height: approx. 780 mm Workpiece length: max. approx. 4,000 mm Workpiece width: max. approx. 900 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.
Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQs warehouse in Germany from early September 2026. Technical data Manufacturer: Grone ...
Conveyor belt conveyor belt conveyor 4500 mm length 100 mm width Condition: very good (used) Description: 4.5 meter length of the conveyor belt 100 mm belt width Overall dimensions: 4500 x 270 mm x 1550 mm incl. motor Perfectly functional
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Bridge spacing 30 mm, bridge height 5 mm Conveyor belt made of plastic white, as good as new Tilt adjustable 1 Speed Dust compartment Mobile Drive 400V/50Hz
Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm
Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance
We offer you a chain conveyor belt for Presona channel balers Technical specification Strip width: 1.1 m Height of the side in the ascending part: 0.85 m Length of the horizontal loading section: 6.0 m Gooseneck: 1.0 m Belt depth in the horizontal loading area: 0.5 m Length of the rising part: 9.0 m Lifting height: 1.0 m Motor power: 3.0 kW If you have any questions, please call us: +48 696 072 985
2x Mobile conveyor system for unloading trucks / swap bodies etc. – used - : Price per piece from location: only 950.-€ (net), incl. loading! When buying both systems, we add a non-driven roller conveyor! Approx. 4x 3m, rollable with feet! A system consists of 2 belt conveyors (driven) and a roller conveyor that are plugged together / extended. Of course, only one belt conveyor and the roller conveyor could be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile Conveyor System Year of manufacture: 07.2011 SERIAL NUMBER: 3447 Element width: approx. 80cm Strap width: approx. 65cm Length of belt element: 4.10m, Length of roller conveyor: approx. 5m Total length when all 3 elements are assembled: approx. 13m! Roll diameter approx. 5cm, roll length approx. 60cm Height: approx. 75cm Connected loads: 400V/50Hz 16A Condition: good Available: immedia ...
Aluminium telescopic conveyor belt, Gawronski – used - : Price ex location: only 14.950.-€ (net), incl. loading! Manufacturer: Gawronski GmbH Type: 686001 Year of Make: 2019 Series: Universal Belt Packages with Counter Mains voltage: 380/50 V/Hz Power 1.8kW, max. 2.2kW Working platform height, infinitely adjustable in height from 140mm to 965mm Max. load working platform: max. 1 person 150kg Length of transport position: 8,700mm Weight: 1.160kg General cargo max. 50kg/ldm Condition: good Available: immediately Location: 57223 Kreuztal
Conveyor Belt Straight Type GL MTF Technology Length 3.30 m Width 0.57 m with usual signs of use Price is exclusive of VAT
TECHNICAL DATA: Dimensions: 3200 x 700 mm Rotation: 90°
Telescopic belt conveyor, Caljan, 12m total length, laterally movable on rail (the rails are screwed on the ground) – used - : Price from location: only 25.000.-€ (net), incl. loading! Manufacturer: Caljan Year of Make: 2022 Project No.: 30-7322-00 Type: CB3M 5/7-600 Length retracted: 5.10m Length extended: cq. 12m Strap width 60cm Serial No.: 215652 Rated Voltage: 3 × 400VAC+N+PE Nominal frequency: 50 Hz Rated current: 6.44 A Nominal power: 2.47 kW Weight: approx. 2,000 kg Former new price over 70.000.-€ (net) Condition: good to very Available: immediately Location: 86161 Augsburg
Sell pipe track system from the manufacturer BANSS with storage and retrieval conveyor and pneumatic pipe track switches. Pipe tracks are equipped with sliding rails. System is already professionally dismantled and ready for loading. Was only slightly in operation. Very neat condition. Plans of the company BANSS available. Empty hook conveyors and empty hook tracks included in the package. Pictures show the condition before dismantling
Inclining conveyor with variable speed control., With infeedhopper and side, Belt width: 500 mm, Belt width nett: 450 mm, Belt speed: variable, 7-13 m/min, Infeed height: 1670 mm, Outfeed height: 2300 mm, Divider height: 30 mm, Divider space: 280 mm, Dimensions: 1700 x 1300 x 2500 mm, Power: 230VAC, 50Hz
Panel return system for single-sided edging machine in left-hand version with a length of approx. 12m50 Panel length 240 to 2700 mm Panel width 60 to 1000 mm Panel thickness 8 to 80 mm Min/max panel dimensions with 4-sided machining: 240 x 80 mm, 2500 x 1000 mm Working height 950 mm At the machine outlet is a tilting air table that returns the workpieces on a conveyor belt to the machine operator Tilting air table with dimensions 2500 x 1400 mm Air table at the front of the machine inlet with dimensions 720 x 580 mm Brush cleaning of the return belt air table at the end of the return conveyor with dimensions 2500 x 1250 mm
Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sou ...
Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Angled conveyor belt with protective cover -Speed: 4.2 m/min -Conveyor belt width: 80 mm -Conveyor belt length: 1355 mm / 340 mm -Motor: Groschopp 0.065 kW -Dimensions: 1780/500/H340 mm -Weight: 63 kg
Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: MOSCA, Roller conveyor driven inclined conveyor -Type: SCHÄGFR.F. -Drive motor: Lenze 0.37 kW -Speed: 27 m/min -Roller width: 475 mm -Roller diameter: 50 mm -Axle spacing: 65 mm -Conveyor length: approx. 1500 mm -Base: height adjustable -Dimensions: 1530/710/H1040 mm -Weight: 143 kg
Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum section for suctioning the material to be conveyed -Belt width: 250 mm -Conveyor length: 2460 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 2460/470/H300 mm -Weight: 152 kg
Drive for conveyor chain of an Eisenmann paint shop New consisting of: 2 pcs drive unit 1600 x 360 x 520 mm 5 Pcs Replacement Chains ( 4 Pcs. Packed) Drive pinion: 10 teeth Chain sprocket: 10 teeth Driver width: 3 cm Chain link length: 130 mm Auction-ID: A1-50529-36
Op maat gemaakte, zware kraan, ideaal voor lage gebouwen, maar ook om de maximale hijshoogte binnen het gebouw maximaal te benutten.nbsp;Dit komt doordat de twee takels tussen de twee hoofdbalken zijn geplaatst (in plaats van erbovenop te rijden). Kind of: overhead travelling crane Capacity: 16 + 16 ton Span: 22 000 mm Drop: 8 meter Tackle speed: 0,6 > 4 m/min Weight: 26 ton Radiocontrol: radio control
Driven roller conveyor Length 3100 mm A total of 16 rolls Of which 14 are powered Diameter 80 mm Roll length 600 mm Working height 920 mm Feed speed 14 m/min. Motor power 0.55 kW Mobile on castors Dimensions 3400 mm x 740 mm x H 1050 mm Weight approx. 350 kg (Previously stood in front of four-sided planer copper mill)
2018 Kronen KUJ cube, strip and slice cutting machine – used, Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing., This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor., Located in Emmeloord, the Netherlands. Available immediately – price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/kronen-kuj-2/, Machine type: Cube, strip and slice cutting machine, Condition: Used, Cutting types: Cubes, strips and slices, Infeed: Inclined cleate ...
Connecting conveyor belt size: 1500 x 610 x 950 mm (WxDxH) Auction-ID: A7-50729-130
Height: 6 m Additional information: Never use Auction-ID: A1-50704-404
Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-50729-13
Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...
Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-50729-29
Automated feeding and assembly system with vibratory conveyors (mirrored, double) Automated feeding and assembly system, consisting of two identical, mirrored lines. All essential assemblies are available in 2 parts. Manufacturer / Components (excerpt): Vibratory conveyor technology: AViTEQ Vibrationstechnik GmbH Type: KFO 7-1-SIM, year of construction 2019, 230 V / 50 Hz Vibratory conveyors / controls: SIM round conveyor type SF 500, year of construction 2020, 230 V / 50 Hz Various SIM control units (bunkers, round conveyors, conveyor belt) Equipment / construction: 2 × round vibratory conveyors (Ø approx. 500 mm) 2 × bunker systems 2 × conveyor belts Linear feeding lines Pneumatic separation and transfers Aluminium profile frame Central control with SIM controllers System mirrored (left/right identical)Condition : Used, system comes from industrial use Technical data: Size: ap ...
In the name and on behalf of the beneficiaries, we auction a Roller conveyor system Manufacturer: SSI Schaefer (single angled) Year of Make: 2019 Total length: approx. 25 m with crate pick-up station, control cabinet with touch panel Siemens SIMATIC HMI Minimum bid: €8,000.00 plus 18% commission, plus 19% VAT Pictures and other offers can be found on our homepage. Technical information is provided to the best of our knowledge. Errors excepted. Hammer price: 23 October 2026, from 09.00 a.m. Pick-up: By appointment Location: 01458 Ottendorf-Okrilla Offer subject to change. Subject to prior sale.
Gravity Roller Conveyors – 3 pcs. Lot 118 comprising three used non-powered roller conveyor sections with galvanized steel rollers, blue steel side frames and adjustable support legs with floor mounting plates. Suitable for manual or gravity transfer of panels, boards and other flat workpieces. Quantity: 3 sections Operation: Gravity operated Condition: Used Approximate dimensions per section: 3,000 × 800 × 1,000 mm Approximate weight: 100 kg per section All descriptions are indicative only. Auction-ID: A1-50546-118
Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data Manufacturer: Krones Model: AirCo Year of manufacture: 2011 Machine type: air conveyor, neck handling of empty PET bottles Total conveyor length: approx. 60 m Declining sections: 10 sections at 10°, approx. 16.8 m in total Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right Fan units: 7, each with filter housing Diverter: 1 Conveyor sections In ...
- The conveyor belt has a metal support structure. - The installation includes an electrical panel and control elements. - Manual operation - Belt width: 1000mm - The scissor lift table shown in some photographs IS NOT included in the lot. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-13
Pouring height: 200 cm Sold with small conveyor. Auction-ID: A1-50867-37
Specifications: - Product type: conveyor / belt conveyor - Version: horizontal conveyor belt - Tire type: rubber/plastic treaded tire - Belt surface: coarsely profiled / non-slip - Frame: steel construction - Frame colour: green - Electrically powered - CE components available - Length and bandwidth: to be measured Drive: - Engine brand: Transtecno - Engine type: TS711-4 - Engine serial number: 1705001 - Version: 3-phase asynchronous electric motor - Operating mode: S1 - Protection class: IP55 - Insulation class: F - Motor weight: approx. 5 kg - Cos φ: 0.73 Motor data at 50 Hz: - Power: 0.25 kW - Speed: 1,395 rpm - Voltage: 220–240 V Δ / 380–415 V Y - Current: 1.38–1.27 / 0.80–0.73 A Motor data at 60 Hz: - Power: 0.30 kW - Speed: 1,680 rpm - Voltage: 264–288 V Δ / 456–498 V Y Equipped with, among other things: - Profiled conveyor belt - Electric drive motor - Drive roller ...
Bandwidth 216 With transponder to measure the distance of the tire height due to speed Small tear in the bandsheet, however, this has no obstacle Power cream 380V Auction-ID: A1-47393-181
Function: for surface cleaning/structuring/marking or for cutting/welding Laser 1: Part number. 3248890 Laser 2: Part number: 3248890 Laser power: 100 W Wavelength: 1064 nm Computer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-50858-3
Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors
Hours: 01940,02 Power supply: 400 V, 3-phase, 50/60 Hz Largest Heater Load: 14.5 A Short Circuit Interrupting Capacity: 5,000 A CE marking Technical data: The 1707 MKIII has 7 upper and 7 lower heating zones with hot air convection. The heated process section is approximately 1.85 m, the maximum process temperature is 350 °C. As standard, printed circuit boards can be processed approximately 50–460 mm wide; the maximum transport speed is about 1.88 m/min. Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-55
Metal detector with conveyor and reject bin, This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin., Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/goring-kerr-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Reject: Reject bin beside the belt, Belt: Blue plastic belt, Controls: Own control box with start, stop and emergency stop, Construction: Stainless steel, frame on castors
Loma IQ3 metal detector on conveyor, built in 2022, This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2022-loma-iq3-metal-detector/, Type: Metal detector with conveyor, Aperture: 350 × 100 mm (w × h), Belt width: 300 mm, Belt length: 2,300 mm, Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)
Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)
Sartorius MDP+ metal detector on conveyor, built in 2009, This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2009-sartorius-mdp-metal-detector/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,060 mm
Checkweigher for boxes and crates, This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet., The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/checkweigher-with-roller-conveyor/, Type: Checkweigher with roller conveyor, Weigh platform: Roller conveyor, Controls: Touchscreen with product data and statistics, Construction: Stainless steel, on adjustable feet
maximum number of results exceeded
please refine your search
2.500 € 
