roller mills used for sale

Transnorm accumulation roller conveyor 19000-600-550 RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 600 Roll width in mm: 550 condition: gut Jam detection: Lichtschranke nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Conveying length in mm:  ...

Transnorm roller conveyor 3620-600-555 RA2492 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 3620 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gear Motor Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 1995 nominal voltage: 380-480 V Conveying length in mm: 3620 Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: including side guides without supports For individual, expert advice, simply get in to ...

Year of manufacture 2004 Anilox roller with 90 lines/cm as good as new condition suitable for Heidelberg SM Delivery date: immediately from stock

Curves roller conveyor; Height approx. 800mm; Depth approx. 1600mm; Width approx. 3200mm; Condition as is.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with pull-off conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor -Roller conveyor: completely electrically movable -Telescope: extendable to 10,620 mm -Roll width: 800 mm -Length: 5230-10,620mm -Load capacity: up to 50 kg/m -Working height: 1615 mm -Transport dimension: 5230/1320/H2170 mm -Weight: about 2000 kg

Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement.

Baguette long roller Artofex AFH Year of Make: 2022 Condition: cleaned & tested, new underbelt Dough input manually Dough sheeter at the infeed, adjustable 1. Forming board, height adjustable, dough shape pointed or straight, with flour shaker 2. Mold board, flat Working width: 600 mm Adjustable working speed

Lippert roller conveyor 1620-570-500 RA2511 Make: Lippert Roller width (RB): 500 mm Nominal width/outer width (NB): 570 mm Length: 1420, 1620, 2100 or 2700 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: Interroll Drummotor Electrical data: 24 V Frame height: 105 mm Conveyor speed: Speed controll with Interroll Motorcontroller Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) nominal voltage: 24V Conveying length in mm: 1420, 1620, 2100, 2700 Nominal / outside width in mm: 570 Roll width in mm: 500 Roll division in mm: 76 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone o ...

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Manufacturer: S.M.A.R.T. Machine Type: Thread Rolling Machine Model / Type: NGP DD Year of Manufacture: 2008 Technical Specifications - Voltage / Tensione: 3 x 480V + N - Power / Potenza: 55 kW - Current / Corrente: 100 A - Frequency / Frequenza: 50 Hz - Auxiliary AC / Ausiliari A.C.: 115 V a.c. - Auxiliary DC / Ausiliari D.C.: 24 V d.c. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Pee-Wee Model: UPW 24 Type: Thread Rolling Machine Year of Manufacture: 2009 Weight: 2400 kg Rated Voltage: 400 V Control Voltage: 24 V Frequency: 3 Ph / 50 Hz Rated Power: 12 kW Rated Current: 32 A Fuse: 32 A Compliance: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

2 pieces roller conveyor BERNADO RB 3 -used steel rollers---------- Technical data ----------roller conveyor length: 1,800 mm, roller diameter: 38 mm, height adjustment: 640 - 1,100 mm, load capacity: 500 kg

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

Used dosing bunker with moving floor and discharge roller Manufacturer: HARTNER Type: active vario-storage (AVS System 2100 - 40) Year of Make: 2004 Technical data: Overall width: approx. 2,670 mm Length: approx. 12,000 mm Width: approx. 2,670 mm Height: approx. 2,500 mm

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Roller guide: for profile steel shears, flat steel shears... -Roller spacing: approx. 84 mm -Dimensions: see photos -Dimensions: 245/143/H70 mm -Weight: 5.4 kg

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

approx. 8 pieces Rollable flow rack Creform, FiFo, sorting / assembly rack with flow levels – used - : Price per piece from location: 350.-€ (net)! Manufacturer: Creform Type: Pipe plug-in system Year of manufacture: unknown Dimensions: approx.: 200x130x200cm 1 channel 8 brake rollers Roller strips Condition: good Available: immediately Location: Leipzig

approx. 8 pieces Rollable flow rack Creform, FiFo, sorting / assembly rack with flow levels – used - : Price per piece from location: 400.-€ (net)! Manufacturer: Creform Type: Pipe plug-in system Year of manufacture: unknown Dimensions: approx.: 180x180x200cm 2 channels 9 brake rollers Roller strips Condition: good Available: immediately Location: Leipzig

Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW @ 50 Hz, 380V center distance: 75 mm Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2016 angle: 30° condition: Ausstellungsstück nominal voltage: 380-500V Conveying length in mm: 1040 / 2900 Nominal / outside width in mm: 1080 Roll width in mm: 1050 Roll division in mm: 75 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: 1,0 scope of delivery: without supports and side guides For ind ...

Shelf load: 150 kg Dimensions per shelf: 920 x 650 mm Auction-ID: A7-49089-400

Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm -Weight: 328 kg

Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven -Drive motor: Flender Himmel 0.37 kW with variable gearbox -Speed: 3.75 to 70.2 m/min -Roller width: 140 mm -Roller diameter: 50 mm -Axle spacing: 140 mm -Conveyor length: approx. 4400 mm -Base: height adjustable -Dimensions: 4480/360/H1045 mm -Weight: 131 kg

Machine is in perfect condition. Was only in operation intermittently, 3900 operating hours run Drive motor: 250 KW Engine data: see nameplate

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3400 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production number: K1081568 Operating voltage: 3 x 400 V Nominal current: 181 A Frequency: 50 Hz Connection: 90 kW incl. rolling devices 5 devices with working length: 4400 mm also powder coating systems from the manufacturer RAPP incl. light barriers Auction-ID: A7-49089-415

3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ------- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable ...

We sell SKF 24036CC spherical rollers or SKF NJ 2228 ECML ball bearings unused items

Machine number: 18,307 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 245 A Cooling water pressure: min. 3 bar/max. 8 bar Cooling water volume: 70 l/min incl. gripping system and powder coating from the manufacturer RAPP Control: SIEMENS Auction-ID: A7-49089-242

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5700 € : 110.01 € : 1550 mm : 1 mm : 68 mm : 1.5 kW : 2110 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance

Carousel rack for carpet and flooring rolls Robust and fully functional carpet paternoster (carousel shelf) from the manufacturer Hubtex, model TRPA. The system is ideal for space-saving, vertical storage and display of carpets, PVC rolls or other heavy roller goods. Master Data & Weights Manufacturer: Hubtex Maschinenbau GmbH (Fulda) Model / Type: TRPA Engine Number: 39080 Maximum load capacity: 2,750 kg Length approx. 5000 mm Permissible unload (imbalance): max. 500 kg Net weight of the system: 1,200 kg Capacity: approx. 14–16 support rods / roller places Electrical connected loads Mains voltage: 380 V 3 N~ + PE 50 Hz Rated power: 0.75 kW Rated current: 2.1 A Degree of protection: IP 44 The carpet and floor coverings for the circulation shelf can be purchased for € 1000 net extra. Item location: Frankfurt am Main Period: The collection m ...

Graule RO-ST60 Roltafel met aanslag en pneumatische rem Merk: Graule Type: RO-ST60 Lengte: 3.0 meter (netto) Maat instelling: Grof en fijn verstelling Nauwkeurigheid: 0.1 mm Condition: functional checked

Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 105 Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer Böttcher Böttcher KBA RA 105 Roller 0905480 B 1902 Böttcher KBA RA 105 Roller 0905495 B 1903 Böttcher KBA RA 105 Roller 0905473 B 1703 Böttcher KBA RA 105 Roller 0905472 B 1702 Böttcher KBA RA 105 Roller 0905476 B 1511 Böttcher KBA RA 105 Roller 0905476 B 1601 Böttcher KBA RA 105 Roller 0905476 B 1606 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905470 B 1702 Böttcher KBA RA 105 Roller 0905474 B 1604 Böttcher KBA RA 105 Roller 0905470 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1605 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905473 B 1606 Böttcher KBA RA 105 Roller 0905495 B 1605 Böttcher KBA RA 105 Roller 0905480 B 1605 Böttcher KBA RA 105 Roller 0905472 B 1605 Böttcher KB ...

Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE

Der Schrägrollentisch dient zur Überbrückung von Höhenunterschieden und Maschinenzwischenräumen. Außerdem benutzen Sie den Schrägrollentisch als Basisstation für den Cardtipper (mit GWG), den Tapesspender (mit GWG), die OUE-Einrichtung oder zum Gummieren. The inclined roller table is used to bridge height differences and gaps between machines. You can also use the inclined roller table as a base station for the card tipper (with GWG), the tape dispenser (with GWG), the OUE device or for gumming. Schrägrollentisch / Inclined Roller Table GUK RT 46 Baujahr / Year 1994 - Serial-No. 34088 fahrbar und höhenverstellbar / mobile and height adjustable

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-34

with plastic roller blind, 5 shelves height-adjustable, without contents Auction-ID: A1-50085-33

with plastic roller blind, 4 shelves height-adjustable, without contents Auction-ID: A1-50085-37

Vibratory roller, diesel engine, double vibratory roller, electric ignition, power steering, water system, never used Overall dimensions: 2000 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-50066-115

Equipped with 2 adjustable shelves and wooden top Auction-ID: A1-49785-361

Key data: 3000 KG, 2900 mm, 2300 mm

For sale are two used roller floor racks from Lützenkirchen Lagertechnik GmbH with foldable stem model "4007" - Width approx. 2,900mm - Depth 2,650mm (unfolded) - Height 2,300mm - 5 roller floors each with a payload of 3,000kg - Drawers: Ball bearings with rollers - Net usable area per drawer 2,600x1,300mm with 1 cover shelf each - Pull-out trolley can be swivelled, with brake - Colour RAL 5012 light blue The price shown is "net" per shelf. If you are interested, please feel free to contact us.

2 cabinets with dimensions: 1020 x 460 x 1475 mm; 2 cabinets with dimensions: 1200 x 460 x 1400 mm; equipped with adjustable shelves and beech top Auction-ID: A1-49785-367

Equipped with 2 adjustable shelves and wooden top Auction-ID: A1-49785-262

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Auction-ID: A1-50275-82