roller mill used for sale

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

Turning and milling machine combined in one machine. The most stable table milling machine in the world! Machine tool MD-23 Rotary equipment: - complete tailstock - Three-jaw chuck with jaws stepped inwards and outwards - Turning tool holder - matching feed flange Horizontal milling device: - milling shaft - Counterholder including fastening rails Tools and clamping devices - Machine vice - a selection of cutters and holders - different rotating center punches - two boring heads - Cone wiper - Clarkson collet holders - ER32 collet holders And original Waldmann machine light

General SKU089F487 LocationBarneveld MakeEMB Elektromotorenbau Birsfelden TypeDKF-10 No.447753 Motor Motor power9 kiloWatt Main Features MaterialMild steel/Stainless steel Motor9 KW Inlet diameter95 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesdia. 95 mm With hoppercheck (± dia. 370x600mm) InletDia. 95 mm Outlet170x40 mm Motor± 9 kW, 380/660 V, 2880 rpm Speed2880 rpm MaterialMild steel, Nickel alloy (201) 2.4068, stainless steel 1.4006 (AISI 410), Stainless steel 1.4552, Stainless steel 1.4301 (304) Information Year of constructionunknown With switchcheck Floorspace0,6x0,5 m Total height1,4 mColloid millsEmb BirsfeldenMills > Colloid millsBrand > Emb Birsfelden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck With jacketcheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 ...

General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm With jacketcheck Fine Impact Mills MaterialMild steel General With switchgearcheck Floorspace2,1 x 1,1 m Total height0,8 mFine Impact MillsDiscountPallmannMills > Fine Impact MillsDiscountBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

General SKU011Y102 LocationBarneveld MakeMirodur SpA. Aprilia TypeTurbomill 50HP No.128 Main Features MaterialStainless steel Volume10 Ltr. Motor37 KW Specified Features - Sand mill Vertical sandmill:Immersion mill: (1x) Capacitybasket 10 Ltr, Basket dia. 430mm Motorhydraulic drive unit 37,0 KW, 380/660 Volt MaterialStainless steel With jacketcheck General Year of construction1992 With switchgearcheck Floorspacemill 2,4x0,8 M Total heightmill 2,7 M Extra Specifications- Dim. hydraulic unit: 2,3x0,8x1,3 Mtr (LxWxH) - Shaft length ± 1150mm (incl. basket) - Distance between shaft and frame ± 700mmSand millsDiscountMirodur SpaMills > Sand millsDiscountBrand > Mirodur Spa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...

General SKU056U362 MakePUC Probst &: Class TypeK-100 No.91079 Year of construction1991 LocationBarneveld Material Rotor materialStainless steel Main Features MaterialStainless steel Motor5.5 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid mill in line(1x) Rotor sizesø 100 mm Teethed rotorcheck Without hoppercheck InletDN50 OutletDN50 Motor5,5 kW (400 V, 2905 rpm (Ex)) Speed2905 rpm MaterialStainless steel With jacketcheck General Mounted on wheelscheck With switchcheck Floorspace0,9 x 0,6 m Total height1,3 m Weight125 kg ATEX designedcheckColloid millsDiscountPuc Probst & ClasMills > Colloid millsDiscountBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU002Y164 MakePUC Probst &: Class TypeN-100E No.74099 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor4 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid mill in line(1x) Rotor sizesø 100mm Cross teethed rotorcheck Motor4,0 kW, (380 V, 2880 rpm) With variable speed drive(frequency converter) Speed100- 2880 rpm MaterialStainless steel With jacketcheck General Mounted on wheelscheck With switchcheck Floorspace1,7 x 0,7 m Total height1,1 m Weight300 kgColloid millsDiscountPuc Probst & ClasMills > Colloid millsDiscountBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

General SKU094Y627 MakePUC Probst &: Class TypeK-180 EL No.88004 Year of constructionunknown LocationBarneveld Motor Motor power30 kiloWatt Main Features MaterialStainless steel Motor30 KW Inlet diameter25 mm Specified Features - Colloid mill Colloid mill in line(1x) Rotor sizesø 180 mm Cross teethed rotorcheck With jacketcheck Inlet4x ø 25 mm Outletø 60 mm Motor25,0/30,0 kW (380 V, 2960 rpm (Ex)) Speed1475/2960 Rpm MaterialStainless steel With jacketcheck General Floorspace1,7 x 0,7 m Total height0,7 m Weight650 kg ATEX designedcheckColloid millsDiscountPuc Probst & ClasMills > Colloid millsDiscountBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Information Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsDiscountForplexMills > Fine Impact MillsDiscountBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU010Y156 MakeNetzsch TypeRM-100 GK, Figur 576.95 No.204.389 Year of construction1992 LocationBarneveld Main Features Volume100 Ltr. Motor90 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity100 Ltr Housing dimensions dia. 535mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor90,0 KW, 380/660 Volt With jacketcheck General With switchgearcheck Floorspace2,6x1,1 M Total height3,4 M Weight5000 KGSand millsDiscountNetzschMills > Sand millsDiscountBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU070C323 LocationBarneveld MakeFryma Maschinen AG Rheinfelden TypeMSM-32 No.M-10922 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill Vertical sandmill:CoBall mill: (1x) Capacity2,42 Ltr Housing dimensions dia. 350x210mm, Rotor dia. 340mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22,0 KW, 380/660 Volt (IP54) Rotor speed± 580 Rpm Capacity90-180 Ltr/Hr (paint/varnishes) MaterialMild steel With jacketcheck General Year of construction1984 With switchcheck Floorspace1,4x0,8 M Total height1,7 M Technical specs Extra informationRotor dia. 340mmSand millsDiscountFrymaMills > Sand millsDiscountBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

General SKU135N667 MakeSussmeyer TypeHM 150 E.H.P. No.103780 Year of construction1990 LocationBarneveld Main Features MaterialMild steel Volume150 Ltr. Motor84 KW Specified Features - Sand mill Horizontal sand millcheck Capacity150 Ltr. Housing dimensions Dia. 420x1300mm With mechanical sealcheck With jacketcheck Motor84 KW, 380/660 Volt (Ex) With variable speed drivecheck MaterialMild steel With jacketcheck General Floorspace3,6x1,5 m Total height1,9 m Weight4250 kg ATEX designedcheckSand millsDiscountSussmeyerMills > Sand millsDiscountBrand > Sussmeyer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU256K252 Makeunknown, manufacturer tag is missing LocationBarneveld Material Housing materialStainless steel Disc materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor15 KW Inlet diameter180 mm Specified Features - Colloid mill Grinder:Perforated disc mill: (1x) Rotor sizedia. 180mm House jacketedcheck Inletdia. 25mm Motor15,0 KW, 220/380 Volt (Ex) Speed2925 Rpm With jacketcheck Colloid mills MaterialStainless steel General Floorspace1,1x0,4 M Total height0,5 M Weight260 KG ATEX designedcheck Extra SpecificationsDisc is perforatedColloid mills-Mills > Colloid millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barn ...

General SKU016G043 MakeFryma AG Rheinfelden TypeMSZ-12 No.M-15149 Year of construction1991 LocationBarneveld Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Vertical sandmill:CoBall mill: (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Motor± 3,0 KW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motorcheck MaterialMild steel With jacketcheck General With switchcheck Floorspace1,0x0,6 M Total height0,8 M Weight200 KG ATEX designedcheckSand millsDiscountFrymaMills > Sand millsDiscountBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipp ...

General SKU043R230 MakeDrais TypePM 5 TEX-H No.51638 Year of construction1984 LocationBarneveld Material Housing materialStainless steel Disc materialStainless steel Main Features MaterialStainless steel Volume6 Ltr. Motor6.8 KW Specified Features - Sand mill Horizontal sand mill(1x) Capacity6 Ltr. Housing dimensions Dia. 145x370mm With jacketcheck Motor6,8 KW, 220/380 Volt, flameproof MaterialStainless steel With jacketcheck General With switchgearcheck Floorspace0,9x0,8 M Total height1,6 M Weight420 KgSand millsDiscountDraisMills > Sand millsDiscountBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU038S118 MakeDrais TypeU.Muehle RS20 (System Welte) No.53596 Year of construction1989 LocationBarneveld Specified Features - Sand mill Material finishCoating Pressure Working pressure jacket2 Bar Main Features MaterialCoated Volume8 Ltr. Motor4 KW Sand mills Vertical sandmill(1x) Capacity8 Ltr Housing dimensions Dia. 250-140x220mm With jacket(1,1 Ltr) Max. temperature80 Degr. C. Motor4 KW, 220/380 Volt with frequency controller Information With switchgearcheck Floorspace1,1x0,7 M Total height1,7 M Weight500 KG Extra SpecificationsRotor and grinding chamber are coated Technical specs Extra informationhouse: Dia. 250-140x220mmSand millsDiscountDraisMills > Sand millsDiscountBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU092A453 MakeDrais TypePMV-25 RL (RL=Lochscheiben-Rührwerk) No.53418 Year of construction1989 LocationBarneveld Material Disc materialStainless steel Pressure Working pressure1 Bar Working pressure jacket3 Bar Main Features MaterialMild steel Volume26 Ltr. Motor24 KW Specified Features - Sand mill MaterialNickel alloy (201) 2.4068 Vertical sandmill(1x) Capacity26,0 Ltr Housing dimensions dia. 230x580mm With jacketcheck Motor24,0 KW, 380/660 Volt (Ex) CapacityMax. 750 Ltr/Hr With pumpcheck Motor0,75 KW, 220/380 Volt (Ex) With variable speed drivecheck Information With switchcheck Floorspace1,6x0,9 M Total height2,3 M Weight1400 KGSand millsDiscountDraisMills > Sand millsDiscountBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide - ...

General SKU041Z171 MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Fine Impact Mills MaterialMild steel Information Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsDiscountForplexMills > Fine Impact MillsDiscountBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU122N606 MakeNetzsch TypeLMJ 2 (506.02) No.204 842 Year of construction1983 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume2.5 Ltr. Motor4 KW Specified Features - Sand mill Horizontal sand mill(1x) Capacity2,5 Ltr. With jacketcheck Motor± 4 KW, Ex With variable speed drivecheck Capacity5-50 Ltr./Hr. With pumpcheck Motor0,25 KW MaterialStainless steel Information With switchgear(0,6x0,3x0,9 M) Floorspace1,1x0,8 M Total height1,5 MSand millsDiscountNetzschMills > Sand millsDiscountBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU041H138 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Attritorcheck Vertical sandmill:CoBall mill: (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck MaterialStainless steel With jacketcheck General Year of construction1993 With switchcheck With switchgear(as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX designedcheckSand millsDiscountFrymaMills > Sand millsDiscountBrand > Fryma What you can expect from Foeth: -- Machine is in working condi ...

General SKU286M327 LocationBarneveld MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General No.:unknown, manufacturer tag is missing: Year of construction±2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening  ...

Warco WM40 turret mill with 2 axis DRO and with a third DRO retro fitted to the knee (Z axis). The X axis has powered feed and the knee has powered height adjustment.

Key data: 1000 mm, 450 mm

Desma Vertical Injection Moulding Machines Model Type D968 250 ZO ( S3 ) Stroke Volume 2000 cm3 Injection Pressure 1670 bar Platen 560 mm x 630 mm Extended Daylight 860 mm Top and Bottom Hydraulic ejectors 400 mm stroke Strip Intake Control With Vacuum Pump Years: 2014 / 2015

General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt With jacketcheck Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED --Fine Impact MillsReconditionedBauermeisterMills > Fine Impact MillsReconditionedBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...

milling machine, year 1990. Used machine in good condition. More info & price on IndustrialBuyer.

Millipore IsoPak STS, System equipped to pack and unpack columns for Millipore K Prime Biochromatography system year of manufacturing 2000

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

Iddon Two Roll Mill 6” diam. x 12” wide Fully guarded and interlocked

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

MARCHESINI FILLING MACHINE, MODEL MI 200 D.I. Year of construction: 2011 Automatic double-channel linear filling machine for plastic tubes. A great choice for packaging cosmetic and pharmaceutical products. Usable in sterile environments. The customization allows for the maximum production flexibility. possibility of simultaneous installation of different closure systems (metal and hot air) multiple feeding options and adjustable format change via HMI OUTPUT up to 200 pieces/min PRODUCT RANGE Dosage range: 1 - 320 ml Tube height with cap: 50 - 250mm Tube diameter: 11 - 50mm ELECTRICAL CHARACTERISTICS Nominal voltage: 3x400v +N+PE Frequency: 500 Hz 6 kA 18 A OTHER CHARACTERISTICS Weight: 3800 kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

Tagential Flow Filter System Manufacturer: Millipore Model Cogent M1 Year of construction 08/2019 Functionality: Tagential flow filtration for process development, scaling studies and small-scale production Capacity: processes volumes from 300 ml to over 100 L Cassette support: up to 5 Pellicon 2 or 3 cassettes, total membrane area up to several m² Control: automatic transmembrane pressure (TMP) and differential pressure control (DP); Control modes include constant DP and constant TMP Flow rate: Maximum 4.5 L/min at 5 bar gauge pressure Materials & Design: Stainless steel components designed for clean-in-place (CIP) and compatibility with high process temperatures User interface: intuitive, multilingual touchscreen Data processing: Data collection can be uploaded as CSV files Operating conditions: voltage 220-230 V, frequency 50/60 Hz, operating temperature range 4 °C to ...