roller conveyor gravity used for sale

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll: Ø 65 x 240 mm -Dimensions: 325/65/H520 mm -Weight: 8.7 kg

Roller chain, drive chain Condition: unused. Acid-resistant stainless steel roller chain. -Size: 16B-1 SS X - (1 x 17.02 mm) -Number: 11 packages of 5000 mm each -Price: per 5 m

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT

Conveyor belt rollers, transport rollers, roller conveyor, carrying rollers, roller block -Roller block: with 4 polyamide rollers, diameter 32 mm -Rollers: 4x Ø 75 x 40 mm -Transport width: 160 mm, adjustable, see photos -Shaft: Ø 25 mm, supported on both sides -Dimensions: 350/75/H130 mm -Weight: 6.2 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: CC/W33 -d = Inside: 200 -D = Outside: 310 -B = Width: 82 -No sales by weight/remaining stock

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Version: cc/w33 -d= Inside: 220 -D = Outside: 340 -B = Width: 90 -Weight: 30 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 240 mm -Width: 80 mm -Inner diameter: 110 mm -Weight 17 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 90 mm -Width: 23 mm -Inner diameter: 50 mm -Weight 0.65 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings - Bearing type: spherical roller bearing -Bore: 65 mm -conical bore -Outer diameter: 120 mm -Width: 31 mm

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Bearing type: Spherical roller bearing -Bore: Ø 160 mm -Outer diameter: 340 mm -Width: 114 mm -Weight: 50 kg -No sales by weight

spherical roller bearing -Bore: Ø 150 mm -Outer diameter: Ø 320 mm -Width: 108 mm -Quantity: 2x available in storage -Price: per piece -Weight: 42.5 kg/piece

spherical roller bearing -Bore: Ø 50 mm -Outer diameter: Ø 110mm -Width: 40 mm -Weight: 1.8 kg

spherical roller bearing -Designation/Type: Spherical roller bearing -Version: EK -d = Inside: 55 -D = Outside: 100 -B = Width: 25

Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) angle: 45°, 90° Construction year: 1995 nominal voltage: 380-480 V Nominal / outside width in mm: 600 Roll width in mm: 500 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,68 scope of delivery: without supports and side guides For ...

approx. 5 pieces ball roller tables, 2,88m x 0,57m - used - : Price from location: 850.-€ (net), dismantled, packed and loaded! Price for the purchase of all 5 tables: 3.750.-€ (net) dismantled, packed and loaded! Supplier: TGW Manufacturer Castors: ALWAYSE Type: unknown Year of construction: unknown, Length: approx. 2.88m Width: approx. 57cm Height with feet approx. 79cm Condition: good Available: immediately Location: Biebergemünd

spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.2 kg

spherical roller bearing -Type: 22218 E -Weight: 3.5 kg -Outer diameter: 160 mm -Width: 40 mm -Inner diameter: 90 mm

spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 110 mm -Outer diameter: 200 mm -Width: 53 mm -Weight: 7.5 kg

spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 55 mm -Outer diameter: Ø 120 mm -Width: 43 mm -Weight: 2.5 kg

spherical roller bearing -Weight: 2913 g -Outer diameter: 130 mm -Width: 46 mm -Inner diameter: 60 mm

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

Transnorm angled inlet outlet rejector infeed conveyor 45°-700-685 RA2060 Year of manufacture: 2014 discharge angle: 45° Nominal/external width (NB): 700 mm Useful width (NUB): 600 mm ( 685 mm ) Conveyor speed: 0,97 m/s Roller diameter: 50 mm, steel rolls with rubber cover Drive: Interroll drum roller Electrical data: 24V, 2A center distance: 75 mm Height: 80 mm Length: shortest length: 900 mm, length to tip: 1700 mm Optionally available: Supports Side guide one-sided and both-sided Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) angle: 45° nominal voltage: 24V Conveying length in mm: 1300 Nominal / outside width in mm: 700 Roll width in mm: 685 Roll division in mm: 75 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,97 scope of delivery: withou ...

spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 100 mm -Outer diameter: Ø 180 mm -Width: 60.3 mm -Weight: 6.6 kg

tapered roller bearings -Outer diameter: 80 mm -Width: 18 mm -Inner diameter: 40 mm -Weight: 0.5 kg

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 40 mm -Outer diameter: 68 mm -Width: 19 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 90 mm -Outer diameter: 160 mm -Width: 32.5 mm

tapered roller bearings -Weight: 1511 g -Outer diameter: 120 mm -Width: 33.35 mm -Inner diameter: 65 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 70 mm -Outer diameter: 125 mm -Width: 33.25 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 65 mm -Outer diameter: 120 mm -Width: 32.75 mm -Weight: 1.6 kg

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 20.75 mm

tapered roller bearings -Weight: 1350 g -Outer diameter: 130 mm -Width: 29 mm -Inner diameter: 85 mm

tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 60 mm -Outer diameter: 110 mm -Width: 29.75 mm -Weight: 1.3 kg

spherical roller bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 50 mm -Outer diameter: 90 mm -Width: 23 mm

Spherical roller bearings, self-aligning ball bearings -Bore: Ø 80 mm -Outer diameter: 140 mm -Width: 33 mm -Weight: 2.1 kg

Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece

Transnorm inclined inlet Rejector Rejector Roller spiral 45°/90°-900-800 RA2236 Year of construction: 2008 Conveying angle (WZ + WR): 45° + 45° Mean length (ML): 1150 mm Nominal/outer width (NB): 900 mm Effective width (NUB): 800 mm Conveyor speed: please contact us Roller diameter: 50 mm steel + conical plastic-coated rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Center distance: 75 mm Overall height: 120 mm, 450 with motor Overdrive with chain Optionally available: Supports Lateral guide on one and both sides Frequency converter for infinitely variable speed control Ball roller table for infeed and outfeed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Construction year: 2008 angle: 45°, 90° nominal voltage: 380-480 V Nominal / outside width in mm: 900 Roll width in mm: 800 Roll division i ...

Roller chain, drive chain -Length per package: 5 m -reinforced 16B-1 roller chain -1-fold 1 x 17.02 -Number: 10 packages available -Price: 28 euros/m

Cylindrical roller bearings -Type: NU 204 E -d = Inside: 21 mm -D = Outer diameter: 46 mm -B = Width: 13 mm

Cylindrical roller bearings -Type: NUP 2314 -d = Inside: 70 mm -D = Outer: 150 mm -B = Width: 51 mm -Weight: 4.75 kg

Cylindrical roller bearings -Outer diameter: 72 mm -Inner diameter: 35 mm -Width: 23 mm

Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available

Cylindrical roller bearings -Outer diameter: 140 mm -Width: 33 mm -Inner diameter: 65 mm

Cylindrical roller bearings -Outer diameter: 150 mm -Width: 35 mm -Inner diameter: 70 mm

Bezel, setting stick, lynette -Max. passage: Ø 70 mm -Peak height: 250 mm -Weight: 10 kg

Cylindrical roller bearings -Type: 30313 Price: per piece Quantity: 3 available -Weight: 2.4 kg