133,957 used machines on RESALE, but how to find them? Machine Search
Technical Specifications Pole height: 102 mm Center spacing: 450 mm Maximum turning diameter on bench: 200 mm Maximum turning diameter on carriage: 120 mm Bar passing: 25 mm Spindle: 50 - 5000 rpm; 3 kW Tailstock: CM 2 Tailstock sleeve diameter: 30 mm Tailstock sleeve stroke: 80 mm Tool Holder: MULTIFIX Approximate dimensions: 1500 x 510 x 1550 mm Item sold in unverified status Auction-ID: A1-44614-11
A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible.
Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version. Auction-ID: A1-46315-52
turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 254 mm spindle passage: 20 mm turning length: 120 mm Control: TX8i-s total power requirement: 40 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Batch of two four-jaw lathe chucks for independent workpiece clamping. The chucks come from the manufacturers WMW and ROTO RECORD and are ideal for eccentric, asymmetrical or irregular clamping on lathes. Technical data: • Type: Four-jaw lathe chuck, independently adjustable • Included: &nbs p; • 1× WMW DH 130×4-II, Ø130 mm • 1× ROTO RECORD DH 160×4-II, Ø160 mm Auction-ID: A7-46417-114
3× TOS 3-jaw lathe chuck (Ø80 / 100/ 160 mm)Lot of three 3-jaw spiral chucks from the manufacturer TOS. Condition: • used • traces of wear due to age and use • only complete as an item • manufacturer: TOS • type: 3-jaw spiral chuck, self-centering • Jaws: hard jaws • Included sizes: • Ø80 mm – IU 80 M1 – • Ø100 mm – 100/3-2 M1 – max. 5,300 min⁻¹ • Ø160 mm – IU 160 M1 – max. 3,500 min ...
CONTROLS CNC controls TRAUB TX 8 BASIC FUNCTIONS number of spindles: 1 number machining units (turrets): 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 450 mm turning diameter (max): 350 mm bar diameter (max): 60 mm worpiece length max.: 490 mm MAIN SPINDLE spindle revolutions (max): 4000 /min c-axis: yes TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 39 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2100 mm total height: 2100 mm total weight approx.: 4000 kg ATTACHMENTS (TURNING) tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool hold ...
A conventional center lathe is available. An on-site inspection is possible.
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...
EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...
EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...
SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::
Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder
Professional Industrial Machine Digital display 3-jaw chuck 200 mm. 4-jaw chuck Face Plate Fixed bezel Steady bezel Multifix steel holder. Machine Light Foot brake Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine feet Machine Tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset 570 mm Speed 45 - 1800 rpm Tip height 210 mm Spindle bore 52 mm Tailstock quill holder MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Dimensions approx. 2.6 x 1.1 x 1.7 m Auction-ID: A7-46460-424
Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Lining protection, limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-46460-417
Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-46460-499
Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46460-428
Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-46460-403
Professional Metal Lathe,Gear Cutting Machine - 3-jaw chuck - 4-jaw chuck - Hardened bed sheets - Clamping plate - 4-way chisel holder - Feed protection - Standing and moving bezel - Splash protection wall - Machine light Turning diameter over bed 280 mm Turning diameter over support 158 mm Turning length 600 mm Speed 45 - 2000 rpm Center height 140 mm Spindle bore 26 mm Tailstock quill holder MK 2 Tailstock quill stroke 60 mm Metric threads 0.25 - 2.5 mm Thread - Inch 6 - 96 TPI Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 0.16 t Space requirement approx. 1.26 x 0.58 x 0.60 m Condition: never used / new (5) Auction-ID: A7-46460-526
Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-46460-438
Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-498
Lathes with: - Copying device - Forkardt 3-jaw chuck F250 - Multifix steel holder - Coolant system - Machine light - Feed protection - Chip tray - Chip protection wall - Foot brake Turning diameter over bed 410 mm Turning diameter over support 220 mm Turning length 1000 mm Center height 205 mm Circumferential diameter in offset mm Spindle bore 46 mm Spindle speeds 40 - 2000 rpm Total power requirement 22.0 kW Machine weight approx. 1.8 t Space requirement approx. 2.42 x 1.3 x 1.55 mm Auction-ID: A7-46460-616
Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-442
Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408
Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-571
Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. Face Plate 4-way steel holder with 4 pcs tool holder 2 pcs steady rests Machine Light Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Machine Tools. Turning diameter over bed 290 mm Turning diameter over support 170 mm Turning length 750 mm Speed 75 - 2000 rpm Center height 145 mm Spindle bore 38 mm Tailstock quill holder MK 3 MK Tailstock quill stroke 80 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.34 t Space requirements approx. 1.3 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46460-420
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-557
Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-566
SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-46460-500
Lead and pull spindle lathe - 4-jaw chuck 315mm - Multifix steel bracket size B - Feed in upper support - Bezel - Machine feet - Chip tray Turning diameter over bed 520 mm Turning diameter over support 260 mm Turning length 1600 mm Speed 14 - 710 rpm Tip height 260 mm Spindle bore 60 mm Total power requirement 11.0 KW Machine weight approx. 2.9 t Space requirement approx. 4.0 x 1.4 x 1.6 m Auction-ID: A7-46460-484
Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5) Auction-ID: A7-46460-542
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-514
Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-46460-510
Lathes with: - Digital display - Quick-release steel holder - 3-jaw chuck 200mm and 160mm - Chip tray - Centering tip Turning diameter over bed 460 mm Turning diameter over support 280 mm Turning length 1000 mm Center height 230 mm Circumferential diameter in offset 720 mm Spindle bore 53 mm Spindle speeds 28 - 1250 rpm Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions approx. 2.4 x 1.4 x 1.75 mm Auction-ID: A7-46460-450
3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-46460-493
Including various accessories; Quick-release system; Collets round ø3-ø42mm; Collets hexagon 14-32mm; Acurite digital readout; Refrigerant system; Heynau grinding/drilling unit (can be connected separately); Mechanical stop; Gears; Lighting; Occupational health and safety hood; Röhm three-jaw ø160mm; Various attacks; Tool holders; Auction-ID: A1-41995-12
Hyperturn 45 Year of manufacture: 2015 Operating hours: 36,315 h Belt filter system with immersion cooler 600 L / 40 bar Bar loader External turning holders: 6 pcs Drill bar holders: 6 pcs Driven angle heads: 5 pcs Radially driven: 3 pcs Parting tool holder: 1 pc Hainbuch HS/GS collet chucks Presetting device Find more here - / Contact us at -
Manufacturer: HK-CON Model: L2SDZ-6 SUS-090 Type of Machine : Lathe Find more here - / Contact us at -
used
Manufacturer:TRAUB Model: TNX 80/65 Year of Manufacture: 2008 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed: 4,300 min-1 (HSP) / 5,000 min-1 (GSP) - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driven tools: 2x2 / 2x2( ...
used
Manufacturer: TRAUB Model: TNX 80/65 Year of Manufacture: 2005 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed HSP: 5,000 min-1 - Maximum spindle speed GSP: 5,000 min-1 - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driv ...
used
Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...
Technical details Manufacturer: HASCO (Germany) Model: A190 Machine number: 3338 Year: 1986 Type: Tool grinding / pin grinding machine Configuration: Lathe-type toolroom unit with dual spindle arrangement Spindle speeds: 2160 / 4450 rpm and 5400 / 11120 rpm Drive motor: - Voltage: 380 V - Power: Approx. 0.44 / 0.65 kW - Speed: 1400 / 2800 rpm Feed system: Manual carriage feed Clamping: Integrated clamping fixtures for pins and small parts Construction: Compact machine with integrated cabinet base Application: Grinding, polishing, and reconditioning of ejector pins and precision tooling components Condition: Used, typical workshop wear; functionality untested Dimensions and weight (approx.) Length: 900 mm Width: 600 mm Height: 1200 mm Weight: 150 kg Auction-ID: A7-46498-200
Pallet with various accessories Collets Cheek chuck Auction-ID: A1-46607-117
maximum number of results exceeded
please refine your search
3.500 € 
