roll turning lathe used for sale

\" Manufacturer: bedra / Welo / AGIE EDM wire / EDM wire – lots of 16 rolls (different types) Lot of a total of 16 rolls of EDM wire for wire EDM machines. The inventory comes from stock liquidation and includes several manufacturers and wire types. Most of the rolls are unused and in their original packaging, some in polystyrene protective boxes or original boxes. Some rolls are open, but without signs of use and are therefore to be regarded as unused stock goods. The lot includes brass EDM wires and galvanized EDM wires of various diameters. Manufacturers include bedra (Berkenhoff GmbH), Welo GmbH and AGIE. The sale is carried out exclusively as a complete lot with all existing roles as shown. bedra topas® plus • Type: TPLH/300 • Diameter: Ø 0.30 mm • Tensile strength: approx. 800 MPa • Length: approx. 33,600 m • Coil type: P15 • Manufacturer: Berkenhoff GmbH bedra  ...

2 roller conveyors, electrically driven, each with a length of approx. 8800 mm Auction-ID: A1-46310-141

Roll-off trolley for PVC strapping Stable, mobile roll-off trolley for PVC strapping. With large belt drum, mechanical unwinding brake and integrated storage box for sealing sleeves and accessories.   Suitable for PVC tape rolls.   Used, functional, with usual signs of wear.   • Reel Ø: approx. 59 cm • Height: approx. 94 cm • Strip width: approx. 12–16 mm PVC tape Auction-ID: A7-46417-32

\" Milling tools, mainly roller end mills and end mills in various diameters and designs. The lot consists mainly of larger end mills and roller end mills with cylindrical shanks, some with a protective coating on the cutting edges. Isolated smaller milling cutters (e.g. labeled \"Red milling cutter Ø 3.5\") available in multiple strips. Net weight: 18 kg \" Auction-ID: A7-46417-199

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-45902-6

Stock 17 multilayer rolls of 50 m each. - - 80 x 160 x H135 cm Auction-ID: A7-46421-2

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-45902-656

3 roller conveyors, electrically driven, length approx. 3000 mm each Auction-ID: A1-46310-139

- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

- Producer Venjakob - Working width 1.350 mm - Gesamtbreite ~ 1.560 mm - Rollenbahnhöhe 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 85 mm - alle Rollen mit Gummioberfläche auf wunsch - Feed speed infinitely adjustable by hand wheel 2 - 6 m/min - Length 2.475 mm - Colour 7035, lichtgrau - Voltage / HZ 400 / 50 - Total connection power 0,25 kW - Location, in stock

Used dough weigher, conical rounder and long roller All in all EUR 5,990 Visits and test runs are possible by arrangement.

According to photos, weight estimated Stainless steel pipes need to be replaced, Auction-ID: A1-45666-23

In stock on pallet, total dimensions approx. 1200x800x1115 mm Auction-ID: A1-45790-500

Rollmops 50 Working and driving New engine installed Auction-ID: A3-43524-19118

In stock on pallet, overall dimensions approx. 1200x800x1200 mm Auction-ID: A1-45790-501

In stock on pallet, overall dimensions approx. 1200x800x1200 mm Auction-ID: A1-45790-502

In stock on pallet, overall dimensions approx. 1200x800x1200 mm Auction-ID: A1-45790-503

In stock on pallet, total dimensions approx. 1200x800x940 mm Auction-ID: A1-45790-504

material width:180 mm coil weight:0,75 t material thickness:2,0 - 6,0 mm coil external diameter:400 - 1250 mm no. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/min power requirement:4,0 kW weight:2,8 t dimensions (WxDxH):1,4 x 2,45 x 1,85 m snubber roll:pneumatic

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m

material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m

material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width:250 mm material thickness:0,4 - 3,5 mm no. of straightening rolls:9 straightening roll diameter:30 mm speed:3 - 15 m/min material thickness at 250 mm material width:3,0 mm material thickness at 200 mm material width:3,5 mm power capacity:1,8 kW weight:0,9 t Dimensions (WxDxH):1,45 x 1,4 x 1,55 m

material width:200 mm material thickness:0,8 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm material cross-cut:400 mm² speed:3 - 15 m/min power capacity:0,75 kW weight:0,5 t Dimensions (WxDxH):1,0 x 1,0 x 1,4 m

material width:250 mm material thickness:0,25 - 3,0 mm no. of straightening rolls:11 straightening roll diameter:30 mm speed:6 - 60 m/min power requirement:15,0 kW weight:1,1 t dimensions (WxDxH):1,1 x 1,7 x 1,5 m striaghtening pressure automatic:hydraulic coil loof control:ultrasonic

Transnorm accumulation roller conveyor 19000-600-550 RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 600 Roll width in mm: 550 condition: gut Jam detection: Lichtschranke nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Conveying length in mm:  ...

Transnorm roller conveyor 3620-600-555 RA2492 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 3620 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Gear Motor Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 1995 nominal voltage: 380-480 V Conveying length in mm: 3620 Nominal / outside width in mm: 600 Roll width in mm: 550 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: including side guides without supports For individual, expert advice, simply get in to ...

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Lathe

Lathe

Lathe

CATALOG NO. 6901 TECHNICAL DATA - max turning length 1200mm - max turning diameter 210mm - max turning diameter with a standard 90mm steady rest - max dimension of square material for turning with automatic feeding 100mm - 3 hydraulic copiers - additional 3 knives on hydraulic pistons (2 pcs) - 4 types of spindle rotation - automatic or manual operation of the machine - headstock spindle motor 9kW - 3kW hydraulic pump motor - diameter of the exhaust connection 90mm - dimensions for transport length/width/height 3700x2100x2000mm - weight about 3000 kg ADVANTAGES – Italian production – automatic hydraulic copier – original DTR documentation – unpainted – used lathe, very good condition Net price: PLN 69900 Net price: 15032EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may cha ...

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

Key data: 330 mm, 635 mm, 210 mm

brand new, toolmaker accuracy DIN 8605 Center height 167 mm Center width 635 mm Circulation diameter. over bed 330 mm Circulation diameter. over cross slides 210 mm Circulation diameter. in the offset 480 mm Main spindle bore 40 mm Speed range 40 - 2500 rpm Cone in tailstock MK 3 Drive power 2.2 kW Standard equipment: - 2-axis digital display ACU-RITE® DRO 203 - Precision spindle bearing thanks to NSK® tapered roller bearings - Quick-change steel holder MULTIFIX® size MA - Chip collection tray with opening flap at the front - Movable steel holder protection - Rear splash and chip protection wall - Feed protection - Spindle cover - Removable bridge - Coolant system - Work area lighting - Thread clock - Large matt chrome-plated scales - Foot brake with brake pedal over the entire length -Operating instructions - CE declaration of conformity

Key data: 600 mm, 2000 mm, 400 mm

brand new, good handling due to feed switch via joystick and rapid traverse, full-fledged manual transmission with large speed range Technical data: Swing over bed 600 mm over support 400 mm Center height 300 mm Bed width 400 mm Center width 2000 mm Spindle bore 80 mm Speed range (21) 20-2000 rpm quill cone MK 5 incl. accessories: - Rear chip splash protection wall - Electr. Locked face plate/chuck protection - Guide and pull spindle cover - Coolant system - Machine light - Rapid traverse longitudinal and transverse/joy-stick - Feed longitudinal and transverse/joy-stick - Interchangeable wheels - 4-fold steel holder -Operating instructions additionally included in the price: - Fixed bezel 20 - 200 mm - Fixed bezel 180 - 340 mm - Mitlauf. Bezel 20 - 200 mm - Main motor 11 kW instead of 7.5 kW - Cross support machined with T-slots - Reduction gear for t ...

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Key data: 4000 mm, 5000 mm

Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the  ...

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton

Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.