roll tube used for sale

impact length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 137 kg length in width: 620 mm length in total: 4400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

impact length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 172 kg length in width: 620 mm length in total: 5400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

Roller conveyor length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 110 kg length in width: 620 mm length in total: 4000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 140 kg length in width: 620 mm length in total: 5000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 95 kg length in width: 620 mm length in total: 3000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 195 kg length in width: 620 mm length in total: 6400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 12 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A roller crusher BMD machine and a gyratory crusher Fried. Krupp (Thyssen-Krupp) are available. 1) Roll crusher BMD machine BHS Walzwerk V1-800, year of construction: 1967, general overhaul: 1981, power requirement: 30kW. 2) Gyratory crusher Friedrich Krupp Gyradisc fine crusher. On-site inspection is possible.

3 pieces of Soco roller conveyor steel galvanized with a length of about 2 m and 3 pieces with a length of about 1 m. -Usable width approx. 0.50 m. -Adjustable in height and inclination.

A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.

Length from approx. 1400 mm to 4200 mm extendable. Working height adjustable from approx. 650 to 950 mm. Usable width approx. 500 mm. Frame galvanized, plastic support rollers. 8 feet, each with brakeable castors. At the end of the scissor roller conveyor there is a stop device, which can also be folded away.

Used bread roll line KÖNIG, type: Combiline - Head machine KÖNIG Basic Rex - 5 rows - Long rolling station - Pre-proofer - Punching station - Settlement on sheet metal - Weight range: approx. 40 - 120 g - Output: maximum approx. 5,000 pcs./h The plant is still in operation and can be visited. We will be happy to send you further photos and technical data on request.

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - / Contact us at -

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen

1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Thread rolling machine ORT RP18 B 2-roll, overhauled, LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

Neue Druckwalzen / New Ink Rollers KBA RA 105 - RA 106

Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35 Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold lamination Specifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs

Rollen-Laminiergerät - Roll Laminator GBC Ultima 65 Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold lamination Specifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4

Neuer Schrägrollentisch / Band new inclined roller table Heidelberger - Stahl SRT 66

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-710-650 RA2415 Make: Knapp Running direction: both directions Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 nominal voltage: 24V, 380-500V condition: Ausstellungsstück Conveyin ...

Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 106 Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer Böttcher Böttcher KBA RA 106 Roller 0905482 A 1701 Böttcher KBA RA 106 Roller 0905481 B 1603 Böttcher KBA RA 106 Roller 0905481 B 1601 Böttcher KBA RA 106 Roller 0905481 B 1605

Knapp transfer roller conveyor Toothed belt slider 90° 2900/2270-510-450 RA2417 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 710 mm Length: 2900 mm and 2270 mm Roller diameter: 50 mm Roller spacing: 90 mm Frame height: 90 mm Drive section height: +250 mm downwards Distance between belts: 330 mm Belt width: 250 mm Number of accumulation positions: 5 Accumulation position size: 700 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: nominal voltage: 24V, 380-500V Construction year: 2015 condition: Ausstellungsstück Conveyin ...

Key data: 762 mm, 3048 mm, 813 mm

Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

Working widths: 1800 mm roll surface width: 2000 mm diameter: 220 mm rubber quality: Weichgummi rubber: R89, gelb Shore: 75° shore type: 222.11/1800 1 pair of rollers (piece) for dyeing padder 222.11 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure

Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and

Working width: 2000 mm Roller width: 2200 mm pressure: 50 t Pressure line: 230 N / mm Number of rollers: 3 Stück Upper roll: 280 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm dia Roller covering: Polyamidmantel Lower roll: Stahl dia diameter of lower rolls: 280 mm Roller covering: Schreiner-Gravur Clouth speed: max.100 m/min Weight: 26 to dimensions of the machine ca.: 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder, The data for this ad was created with ModulMWS - the sof ...

Thread rolling machine UPW 25.1

Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...

Inv. Num. : 8601 Type: DV 40 W Producer: HAMM Generated: Parameters: Speed: 12 km/h Cylinder width: 1200 mm Length: 3310 mm Height: 2610 mm Width: 1425 mm Machine weight: 4100 kg

Transnorm roller conveyor 2229-660-600 RA2425 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 660 mm Length: 2229 mm Roller diameter: 30 mm Roller distance: 76 mm Motor Roller conveyors: no motor but with 2x pneumatic brake Brake area length: 500 mm Height frame: 90 mm Height with brakes: 200 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: Construction year: 2006 condition: gut Conveying length in mm: 2229 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 76 Driven: NO scope of delivery: mit Bremsen, without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you.  ...

EasySystem driven roller track, in mint condition, several pieces for sale 480x6000 Driven roller track with aluminum frame, in mint condition, several pieces for sale from stock. The track system can be classified. Manufacturer: EasySystem Total track width: 480mm Roller width: 405mm Roller diameter: 50mm Wheelbase: 100mm Total length of track: 6000mm Track height: 700mm (adjustable legs - max. 8cm +/-) Drive: electric motor with NORD gearbox Power: 0.37kW, 1.89A, 230/400V Track speed: approx. 30m/min

Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...