roll to sheet used for sale

Includes assorted metal cutting tools such as drills, end mills, reamers, taps, countersinks and holders. Cabinet with rotating trays. Auction-ID: A7-46756-13

consisting of approx. 59 pieces , some equipped with cutting tools such as cutter heads, internally cooled drills, milling cutters, boring tools Reference: Schmidt - Lot 24 Weight: approx. 300kg Auction-ID: A7-46763-75

Manufacturer Bolt setting device ARNHOLD SCHWEISSTECHNIK, type: VBZ 5000 and other accessories Dimensions of the trolley: approx. 1400 x 840 x 910 mm Auction-ID: A7-46287-170

Benz Werkzeugsysteme driven tool holder, made in Germany. Auction-ID: A7-46756-204

consisting of 10 pieces , 3 of which are driven, suitable for SPINNER CNC lathe Reference: Veatec - Lot 8 Weight: approx. 70kg Auction-ID: A7-46763-256

Heimatec driven tool holder, made in Germany. Auction-ID: A7-46756-206

Consisting of: 7x mounting frames, 6x fuses, 4x diagonal struts, 4x platforms with hatch, 2x horizontal struts and material lift solar for stand height of 6.2m. Auction-ID: A1-46700-10

consisting of approx. 51 pieces, some equipped with cutting tools Reference: Schmidt - Lot 21 Weight: approx. 300kg Auction-ID: A7-46763-72

Auction-ID: A7-46756-240

Construction: One-piece cast iron frame Table: Width: 1,200 mm Depth: 800 mm Shaft : Diameter: 50 mm Rotational speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Equipment: Swivel micrometric guide Shaft clearance under the table Foot brake Shaft locking at the foot Dimensions (estimate): approx. 1,900 × 1,250 × 1,250 mm (to be confirmed) Weight (estimate): approx. 820 kg (to be confirmed) Auction-ID: A1-46801-74

Plastic inserts designed for CNC tool holder storage and transport. Auction-ID: A7-46756-247

Set of adjustable hand reamers by Walton Tools (USA, West Hartford, since 1908). Includes two plastic cases with multiple adjustable reamers and blades in various sizes Auction-ID: A7-46756-210

Lot of 12 Kennametal KM32 modular quick-change tool holders for CNC lathes. Auction-ID: A7-46756-226

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

gebr. Wooden tongs / tree pliers / pipe wrench

Top labeler CBV 140 L, label height of 130 mm, roll core diameter 76 mm. Roll diameter 350 mm, mechanical capacity 30-40 containers / min., electrical connection 230V, power consumption 0.5 kW, strip width 140 mm price: EURO 15.950,--without printing Price: EURO 15.850,--with printing (hot foil) Special device for applying lateral overlapping labels possible.

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

480 m2 steel construction stage used, good condition, see pictures Length approx. 21 m Width approx. 23 m Height lower edge 2.45 m Height top edge 2.9 m fastened with screws and nut Grid distances adjustable in length without shelf shelves Negotiation price: € 14,000.00 net from stock Disassembled and loaded from stock Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers Changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock Purchase / Sale We are looking for, or offer numerous items from various areas on an ongoing broom-pure company clearances Operational resolutions Fast- flexibl ...

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Neri ETA 400S self-adhesive vignette labeller for top labelling of cartons or similar objects. Carton size range (lying flat) from 40 x 110mm (W x L) to 165 x 360mm (W x L). Label size range from 10 x 13 mm (W x L), to 90 x 250 mm (W x L). Infeed via 400-capacity carton magazine, carton discharge via shingling conveyor for easy carton removal. Includes PCE label presence control with rejection of faulty labels and rejection crosscheck. Capacity up to 250 cartons per minute.

Radio tower 30 mtr. Against bid!

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"