128,603 used machines on RESALE, but how to find them? Machine Search
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double Z kneader / Sigma kneader Topos Used Double Z Kneader Topos 250 L – Sigma Kneader – - Kettle Kneader – Dough Kneader - Industrial Kneading Machine – Stainless Steel – Overhauled and Function Tested Robust stainless steel construction, powerful drive, ready for immediate use. The Topos double Z-mixer with a usable volume of 250 litres is a robust and powerful industrial machine for highly viscous mixing and kneading processes. Thanks to its solid kneading arms, it ensures even mixing of viscous media and doughs. Industrial materials such as doughs, sealants, paints, adhesives, raw ceramics or chemical mixes. The machine was designed for continuous industrial use and impresses with its stable design, durable design and easy-to-clean stainless steel design. - Make Topos, built around 1965 - Completely overhauled in 2018. Function-tested. - Easy ope ...
Mettler-Toledo platform floor scale with ramp, platform dimensions approx. 1230 x 1480 mm (WxD), weighing range up to 600 Kg, d=100 g, overall dimensions including ramp approx. 1700 x 2300 x 130 mm (LxWxH) Includes ICS439a Compact Terminal
Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm
Type APT1000 UC Universal panier system suitable for fine and coarse panning (japanese crumbs and corn flakes) complete stainless steel mobile infinitely variable speed with blow-off system with an on-reel roll Track width 1000 mm Dimensions (L x W x H) : ± 2,800 x 1,850 x 2,500 mm
Robust diesel forklift 3-cylinder with fork extension 2 m and accessories, new starter, batteries 1.5 years old, 24 V DC, approx. 6000 operating hours, good condition, no leaks, manual gearbox (no torque converter ) 2 gears forward and backward for slope operation, has been used in a variety of ways in mechanical engineering, can be equipped with tilting bucket, transports 3 tons uphill even in summer, duplex mast lifting height 4 m Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 41 (0)62 966 18 32 Fax. 41 (0)62 966 21 12 available from stock! Prior sale and errors expressly reserved! Price net excl. VAT
Toyota, Forklift Diesel BJ 2018 Toyota 40-8FD40N , 4.5 to / 4500 kg Payload 1.Hand, bought from us New, available now just look at it on site Full view duplex mast 4000mm, with lateral shift and fork positioner, Manufacturer Meyer, forks/tine length 1200mm approx. 11,500 BH / operating hours, 408FD40N10563 Year of manufacture 2018 Comfort cab, heating Mini lever for quick and easy operation, Switch on the left of the steering column for changing direction of travel On-board computer including load weight display Comfortable Grammer seat wide fenders and 300mm wide pneumatic tires also suitable Price VHB Diesel forklift type 40-8FD40N with SAS system for active stability Basic load capacity 4500 kg Load center 500 mm Mast type full clearance duplex Lifting height approx. 4000 mm Overall height approx. 2990 mm Free ...
Part Number: 7804 SPECIFICATIONS - track width 350mm - shaft width 330mm - 300mm disc fitted - max blade diameter 400mm - blade bore diameter 70mm - max cutting height at the blade 400mm, 150mm - table top dimensions: 2240x770mm –in advance - Flers/ratchets - Slide shaft - Flingers - smooth, sliding roller - shaft with saws - 2 sliding rollers, pressure shafts – from below - roller in front of the countertop -Guide -Triggers -caterpillar - central track lubrication - electric shaft lifting with 0.75kW saws - electric body lifting 0.75kW - infinitely variable feed speed regulation - Diameter of the extraction port 320mm - main motor 45kW - overall dimensions l/w/h 2280x1820x2040mm - weight 2850kg ADVANTAGES – Czech production – used multi-saw – DTR documentation – very good condition Net price: 62900 PLN Net price: 149 ...
Key data: 95 , 9
Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.
Height tips 220 mm Useful length 1,000 mm 42 mm bar pass
Forklift TOYOTA - 8 FBE 20 T Specifications: • Load capacity: 2,000 kg • Mast type: Triplex • Overall height: 2,240 mm • Lifting height: 5,000 mm • Free lift: 1,670 mm • Forks: 1,200 mm • Battery: 48 V 6 EPzS 690 Ah 09/2017 • Hawker digital D: 48/80 charger • Total weight: 3,630 kg Accessories: • Double auxiliary hydraulics • Integrated sideshift • Load protection grille •Windscreen • 2x front work lights • Fork extension 1,800 x 120 x 40 mm Year of Make: 2017 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.
X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute
Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton
Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition
The Table Top Print bag packer enables the efficient packaging and sealing of products into pre-made bags and is suitable for various formats. The machine is easy to operate and has a user-friendly display that can be used to set up, save jobs and control operating parameters. For more flexibility, it offers automatic and manual operating modes with a secure sealing rail. The briefing of a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text and barcodes, eliminating the need for separate labeling. Features - Multi-color screen for easy adjustment - Number of products to be packed can be set in advance - Integrated total counter of the products (incl. reset option) - Roll change in less than a minute - Welding by foot signal, automatically or by hand pres ...
We offer Doka Eurex 30-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 400, used - 59,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
We offer Doka Eurex 20-top 400 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 20 top 400, used - 49,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The robust and durable Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and corresponds to column classes D, B/D or C/D according to standard EN 1065. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/95623 ...
turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2 t stroke: 5000 mm clamping width: 5000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Side crane with 6 meter projectionLength rail system approx: 60 metersAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 2 t stroke: 4000 mm clamping width: 9200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hoist DemagBridge traveling craneAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer Doka Eurex 30 top 450 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 450, used - 64,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...
weight max.: 5 t stroke: . mm clamping width: 18000 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer Doka Eurex 30 top 300 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 300, used - 41,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
We offer Doka support leg top, used in Doka rental bearing quality with 75% discount on the new price! Original price: 101,00€ net Special net price: 25,25€ net If desired, Doka lattice box 1.70 x 0.80m at a price of 200.00€ net. Packaging unit: 35 pieces in Doka lattice box 1.70 x 0.80m Product Information For securing slab props Technical information: Weight: 11.95 kg Height: 80 cm Surface: galvanized If you have any questions, please call 0176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
The LPG forklifts Manufacturer: Toyota Type: Tonero 35 Model No.: 02-8FGJF35 S/N: 8FGJF35-82059 Year of Make: 2022 Reading operating hours: 1,528 h Load capacity: 3500 kg Net weight: 4980 kg Lifting height: max. 3300 mm Power: 42 kW Equipment: full cab, duplex mast (height: approx. 2300 mm), hydraulic side shifter, hydraulic tine adjustment with extendable forklift tines is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual v ...
Hakon Sliding Rack System – Professional storage solution for glass, sheets, and large-format materials This used Hakon sliding racking system is ideal for companies in the glass, metal, or sheet metal processing industries that require safe, organized, and space-saving storage. The racking is robust, slides smoothly, and is designed for intensive daily use. Technical Specifications Brand: Hakon Type: RBM 225er/3T/30 Year of construction: 2018 Construction: Welded steel frames, industrial grade Operation: Manual sliding system Length: 10.635 meters Width: 3.16 meters Height: 2.13 meters Maximum size: 550 x 3,210 mm Capacity: 10 bucks Connection: 230V (standard plug) Fuse: 16A Condition: As new, fully functional, ready for immediate use ⭐Key Benefits Space-saving: Sliding frames ensure maximum storage on minimal floor space Safe & organized: Materials remain ...
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1120 mm z-axis: 1250 mm table-size: 1250 x 1250 mm taper: ISO 50 PDB total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 2200 mm table load: 16 t Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210063 Type of machine CNC Rotary table Make TOS Type SK 16 Build in nb X-stroke (mm) 1500 Additional information Table size 2200 x 2200 mm max. table load 16 ton controlled by a machine with a Heidenhain TNC 426 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
