roll out sheet used for sale

Intex outdoor swimming pool, quick assembly, equipped with pump for water filtration system + filters and ladder, measures 4000 x 2000 x 1000 mm Overall dimensions: 1200 x 800 x 8000 mm Weight: 25 kg Auction-ID: A7-50208-137

2-way garden socket with integrated mechanical timer. Equipped with 2 grounded sockets with protective flaps. Suitable for outdoor use (IP44). Housing made of lacquered stainless steel in anthracite. Includes mounting material. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-296

Equipped with insulated walls and roof 2 bedrooms living room with corner kitchen bathroom with shower, toilet and sink each room equipped with lighting and 230V sockets Meter cabinet with circuit breaker PVC flooring Aluminium windows and doors lockable water, electricity and drainage, are simply to be connected to the outside unused and ready for transport ASSEMBLY TIME 30 MINUTES Transport dimensions 5900 x 2200 x 2480 mm, weight approx. 3500 kg Auction-ID: A7-50065-101

Intex outdoor swimming pool, quick assembly, equipped with pump for water filtration system + filters and ladder, measures 4000 x 2000 x 1000 mm Overall dimensions: 1200 x 800 x 8000 mm Weight: 25 kg Auction-ID: A7-50066-350

Intex outdoor swimming pool, quick assembly, equipped with pump for water filtration system + filters and ladder, measures 4000 x 2000 x 1000 mm Overall dimensions: 1200 x 800 x 8000 mm Weight: 25 kg Auction-ID: A7-50208-375

Includes: 1 outside micrometer with interchangeable anvils, 700–800 mm, 0.01 mm 4 outside micrometers, 0–25 mm, 0.01 mm 17 outside micrometers, 25–50 mm, 0.01 mm 14 outside micrometers, 50–75 mm, 0.01 mm 11 outside micrometers, 75–100 mm, 0.01 mm 7 outside micrometers, 100–125 mm, 0.01 mm 8 sets of 4 outside micrometers, 0–100 mm, 0.01 mm Auction-ID: A7-50212-5

Equipped with insulated walls and roof 2 bedrooms living room with corner kitchen bathroom with shower, toilet and sink each room equipped with lighting and 230V sockets Meter cabinet with circuit breaker PVC flooring Aluminium windows and doors lockable Water, electricity and drains, are simply to be plugged outside unused and ready for transport ASSEMBLY TIME 30 MINUTES Transport dimensions 5900 x 2200 x 2480 mm, weight approx. 3500 kg Auction-ID: A7-50208-191

Outdoor shed consisting of steel structure and pe sheet, measures 9 x 3 x 2, 55 meters, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 25 kg Auction-ID: A7-50208-110

Intex outdoor swimming pool, quick assembly, equipped with pump for water filtration system + filters and ladder, measures 4000 x 2000 x 1000 mm Overall dimensions: 1200 x 800 x 8000 mm Weight: 25 kg Auction-ID: A7-50065-350

Suzuki 8 hp short shaft Control stick version Circuit in handle Incl 12 liter tank Plane wings Viewing by appointment only Auction-ID: A1-40314-33

Tohatsu 15 hp four stroke EFI in mint condition runs perfectly running hours +/- 40 Year of manufacture 2023 Long tail Remote control Electric start 12 litre tank Auction-ID: A1-40314-143

Unused, CE, including top case, Adjustable suspension, 3500lbs winch, 5 inch Speed display, Electric power steering, Selectable 2wd-4wd, 14 inch wheels rim with bead lock, front led headlights, rear led tail light, backrest, rear hitch, Available in various colors. With COC documents Auction-ID: A1-40314-16

Climate chamber TD-010A for outdoor installation, 19 inch, including 2 battery modules of 5 kWh Climate chamber type TD-010A, suitable for outdoor installation. The cabinet offers space for an inverter and 10 lithium-ion battery modules in 19 inch size. Thanks to the built-in air conditioning and insulation, the contents remain within the right temperature even in full sun. The case is IP55 and therefore resistant to rain and dust. Two BlauHoff BLH-5KW 19 inch LFP battery modules of 5 kWh (together 10 kWh, 51.2 V) are included. The system is easily expandable with the same model: the cabinet offers space for a total of 10 modules, up to 50 kWh. Suitable for your own battery system with 19-inch rack batteries, and due to the standard 19-inch size, it can also be used as a server or network cabinet at a location without conditioned space. Specifications Type: TD-010A Version: climate ch ...

Pigsty 105 x 28 meters, built in 2001 and 2003 Specifications: Dimensions: approximately 105 x 28 meters Production years: 2001 and 2003 Steel structure with iron trusses and purlins Roof fitted with asbestos-free corrugated sheets Roof insulation with insulation boards of approximately 5 cm Drawings available Features: Doors with frames Windows with frames Ventilation system with fans Rain gutters and downspouts Particularities: The stable must be dismantled and removed by the buyer himself Transport, disposal and necessary tools must be arranged by yourself Debris from the facades may be left behind Other parts of the superstructure must be completely removed Auction-ID: A1-47390-304

Samson CM 7.5 manure injector / arable land injector – 7.50 m – 23 outlets Specifications: Brand: Samson Model/Type: CM 7.5 Machine: arable land injector / manure injector Working width: approx. 7,500 mm / 7.50 m Number of outlets: 23 Version: cultivator tines Maximum working depth: approx. 15 cm, depending on adjustment and ground conditions Factory specification weight CM 7.5: approx. 2,450 kg Factory specification transport width: approx. 2.96 m Factory specification transport height: approx. 3.70 m Features: Heavy Duty Curved Cultivator/Struts New flexible manure hoses Manure supply via separate flexible hoses Vertical Samson dividing head Hydraulic folding frame Hydraulic cylinders for folding Full-width multi-part cage/packer roller Heavy-duty steel frame Suitable for working the soil and incorporation of slurry at the same time Suitable for use on stu ...

pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Note: Mix of colors Product Name: TATA Steel (SAB Profile) 35/1035 Product type: Sheet piling / Trapezoidal sheet (colour mix) Quantity: 63 pieces Size per plate: 6500 mm Total overview: 6500 mm x 63 pieces Thickness: 0.75 mm Operating width: 1035 mm (103.5 cm) Profile height: 35 mm Color: Mix of various colors (including Dark Brown, Terracotta/Red Brown, Copper Brown) Coating: Colorcoat SDP 50 μm / BC & Restcoils Fire behaviour: A1 Material: Structural Steel Total weight: 3,000 kg Auction-ID: A1-41961-70

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm tube diameter: 140 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 6.020 kg. dimensions of the machine ca.: 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...

sheet width: 1600 mm plate thickness: 15,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4225 kg. dimensions of the machine ca.: 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulM ...

sheet width: 1070 mm plate thickness: 4 mm distance between columns: 1100 mm diameter of upper rolls: 110 mm total power requirement: 5,0 KW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 0,9 x 1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 9.0 / 10,0 mm distance between columns: 1070 mm diameter of upper rolls: 190 mm pre-bending capacity: 9,0 mm connected load: 5,3 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A3-46156-2685

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40