roll o matic used for sale

The Octopus sanding dust extraction table is ideal as a work table for dust-free sanding work. With its different footprints of 1.3 to 3.3 m², it offers a safe contact surface for both small and large workpieces. The work surface is made of trapezoidal pressed sheet steel with dust extraction openings and coated with resistant felt in a workpiece-friendly manner. Extraction connection: 200 mm Table length: 3280 mm Weight 200 kg

Horizontal turning machine manufactured in 2000. This Other URSUS TC features a maximum turning diameter over bed of 600 mm and a longitudinal travel of 2000 mm. It also includes a controlled transverse travel of 300 mm and a maximum spindle speed of 2200 rpm. If you are looking to get high-quality turning capabilities, consider the Other URSUS TC machine we have for sale. Contact us for further details.

INOVA/OPTIMA TR240 RENESTER Fully automatic system for loading syringes into trays. With separate control cabinet and integrated control system SIEMENS, type Simatic S7-300. Comes with various spare parts. Built in 2008. PRODUCTION - Output capacity: up to 22,500 syringes/hour - Tray capacity: 100 syringes/tray - Syringes capacity: 1 ml DIMENSIONS - Footprint: 200 x 240 x 200 cm - Weight: 1200 kg

INOVA/OPTIMA DENESTER, MODEL SH250 Fully automatic system for unloading syringes from corresponding trays, then to the machine outfeed and transferred to the next machine. With infeed and outfeed conveyor belts, a separate control cabinet and an integrated control system SIEMENS, type Simatic S7-300. With various spare parts. Built in 2008. PRODUCTION Output: up to 36,000 syringes/h Tray capacity: 100 syringes/tray Syringes capacity: 1 ml DIMENSIONS Size: 280 x 150 x 200 cm (ca) Weight: 1500 kg (ca)

Aircooled chiller TECHNOTRANS OMEGA K 400L 55 KW Cooling capacity: 55 kW / 15.64 tons (13/18 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MG100LC-F-H3-CML3A, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 700 kg. Condition: Good

Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

grinding length: 600 mm grinding width: 400 mm workpiece height: 400 mm total power requirement: kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3592 x 3519 x 2203 mm Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter sys ...

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

- Tooling package with Tool Holders - Axial driven live tools holders - Radial driven live tools holders - Kitagawa B210 3 Power Chuck

x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm table-size: 820 x 320 mm tool adaptor: BT 40 turning speed range: 10000 U/min power requirement: 11 kW Control: Sinumerik Steuerung 828D rapid traverse Z-axis: 1500 mm/min rapid traverse X- and Y-axis: 1500 mm/min workpiece weight: 300 kg no. of tools in the magazine: 12 Stück dimensions: 2164 x 1860 x 2200 mm weight of the machine ca.: 2800 kg immediately available - Siemens Sinumerik control 828D with 15.6 inch touch display - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high payloads - High-torque servo drives, directly connected to the ball screw in all three axes three axes - Precision-ground, preloaded high-performance recirculating ball screw (á 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopi ...

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

TECHNICAL DATA: Roller length: 1300 mm 02 rollers Ø 190 mm Installed power: 0.75 kW EQUIPPED WITH: Glue tray Roller protection grille Safety Foot Switches

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

OTT Tornado R + PU PLC Comp. Control 7" TFT-Touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit - joining Full car. Role magazine Full car. Edge magazine Flush caps pneum. 0-3° Flush Milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounds Radius scraper blade Wing Scraper Soundproof booth with room extraction Cleaning set with 4-fold spraying device, fine buffing device and lubricant spraying device First delivery 2006 Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch

Bread slicer / table model Lebema Orion Small Product description Manufacturer: Lebema GmbH Type: Orion Small Year of construction: 2014 Material: stainless steel Condition: used, functional, bakery condition Circular knife machine Manual operation via rotary control Bread dimensions max: 300 x 280 x 160 mm (LxDxH) Cutting thickness: 4-25 mm Cutting width adjustable For all types of bread Ideally suited for use in bakery branches and large kitchens Connection: 400 V / 50 Hz Outdoor dimensions B.: approx. 60 cm, D.: 70 cm, H.: approx. 60 cm For details, see pictures.

Pullers 160cm deep for deck ovens NEUNew pullers / puller apparatus for deck ovensPullers made of ALUAspullers for 160cm deep ovenPuller dimensions : W: 194cm D: 58cm H: 4cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Attachment hook at the bottomideal for pizza, rolls, small bread, baquettes, croissant etc.

Pullers with pullers for 160cm deep furnace NEWused pullers good condition stainless steel on rollers with 15 pieces  New ALU pullersTrolley Outer dimensions : W: 203cm D: 62cm H: 190cmPullers for 160cm deep ovenPuller dimensions : B: 194cm D: 58cm Height : 4cmthe price is for 15 pullers and trolleysWe have different large pullers in stockDetails see picture

Pullers ALU for 160/180cm deep furnace NEWAductors made of ALUApullers for 160/180cm depth furnacePuller size : W: 200cm D: 58cmWe have various large pullers in stockDetails see picture 

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Drawer printer with possibility of loading up to 4 rolls of 150 m with a maximum width of 42 (106 cm). Print with Pearl Océ Crystal Point toner technology that guarantees valuable results in both CAD and color with a print speed of 30 seconds for A0 size

Omron Solid State Relay Item number: G3PB-225B-VD INPUT 12 – 24 V DC LOAD 50/60 Hz 100 – 240 V AC, 25 A switching load for switching temperature loads Mint condition !

Table dimensions X/Y: 900mm/350mm, magnet dimensions X/Y: 600mm/350mm, max. workpiece height: 375mm, max. table load: 300kg. Machine dimensions X/Y/Z: 3200mm/2600mm/2400mm, weight: approx. 400kg. Documentation available. An on-site inspection is possible.

Pullers for deck ovens 80cm deep NINEew pullers / pullers for deck ovensPullers made of ALUAspullers for 80cm deep ovenPuller dimensions : W: 115cm D: 58cmDeck shop oven, deck ovenfits for Miwe, Wachtel, Friedrich and Wiesheu Fastening hook belowideal for pizza, rolls, small bread, baquettes, croissant etc. do we have various large pullers in stockDetails see picture 

Grecon Dimter OptiCut 304R Optimizer Length of entrance timber min. 900 mm when loading on a cross chain conveyor Wood width min./max. 40-200mm Wood thickness min./max. 15-80mm Lowering, cutting and accelerating: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Wood cross-sections max. 200×25 mm, 170x50mm, 80x80mm, 140×60 mm Saw blade diameter 400 x 30 mm Saw blade speed 4200 rpm. Feed max. 170 m/min Material pick-up conveyor with 6 dodgehammers Cutting Modes: 1.Cut to fixed length 2. optimization of board length to maximize efficiency, 3. removal of wood defects with chalk marking of defects Length of the entire line 21m Year of manufacture 2000

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

Heidelberg OHT SNR: 133501N Year: 1961 Size: 26 x 38 cm Equipment: chases (2) - Heidelberg print-autoplaten - sheet formats min 40x70mm / max 260x380mm - print-/ cutting format max 260x350mm - max speed = 5.500 sph - equipped with ink unit - oil drip tray - weight = 1.100 kg - W168 x D124 x H158cm - 380V/400V - 50Hz - 1.3 kW

Used line for the production of yellow cheese from Obram. Capacity 10,000 kg/day.

The OR-M 510 is a high performance strapping machine perfect for high volume use from light to medium tension applications. Description Specifications: frame size B650 mm x H500 mm up to 65 strapping cycles a minute for PP () straps 9 or 12 mm wide and 0.55 mm thick, touch-panel operation automatic strap insertion, strap ejected if nothing strapped compact, can be used almost anywhere strap dispenser integrated in the machine Made in Switzerland

Key data: 300 °C, 12 kW

1.0 St. gebr. Temperature control unit Manufacturer: TOOL - TEMP Type: TT - OIL 300, 12 kW Year of manufacture: Medium: OIL Temperature: 300° C Heating capacity: 12 kW

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

A continuous glass capping machine VTB with gas flushing for twist-off lids is available. Glass volume: 225ml/380ml, capping capacity: 10-60lids/min, product material: stainless steel 1.4301, machine dimensions X/Y/Z: approx. 3000mm/1000mm/2300mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Expected to be available August 2026.

Model: Backsaver ST Year: 1999 Condition: Used Serial Number: 990216-3 Stock Number: 3253 Tipping height: 980 mm With rechargable battery and CTEK MXS 7.0 charger Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz Dimensions 1400 x 1350 x 1150 mm Weight: 300 kg

Size: 1250 x 2500 mm Impression: 5118 Mio. Equipments: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Total weight: 1,410 kg

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 KW, 450 kVA, 380 V

Brand Mercedes Benz - Stamford Model: 450 KvA diesel generator Year of Make: 1988 Serial Number: On request Operating hours (read) Unknown Capacity (KvA) 450 Capacity (Kw) 360 Engine brand Mercedes Benz Engine model OM444A Fuel Diesel Alternator brand Stamford Alternator model HC534C Voltage 220 - 380 Frequency (Hz) 50 1500 rpm Amperes (A) 684 Dimensions LxWxH (mm) 3200 x 1340 x 1800 Weight (Kg) approx. 3500 Quantity in stock 1 Made in Germany Comments Really good optic condition, running hours unknown, twin turbo

bushing cut-off , PKO in 2nd and 3rd diameter range 14 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 100 mm shaft length under head 90 mm output - pieces/min 100 press power 120 to

bushing cut-off , PKO diameter range 8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

bushing cut-off , PKO diameter range 7-15 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 10-160 mm shaft length under head 15-130 mm output - pieces/min 130 press power 150 to

PKO diameter range 3-8,5mm number of dies 2 number of stations (incl. cut off) 4 cutting length 60 mm shaft length under head 55 mm output - pieces/min 250

bushing cut-off , PKO diameter range 3-8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

bushing cut-off , PKO diameter range 8,5 mm number of dies 2 number of stations (incl. cut off) 3 cutting length 100 mm shaft length under head 80 mm output - pieces/min 300 press power 30 t

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

available from July/August 2026, in operation for 225 and 380 ml jars with TO 58 and 66, The machine is currently operating with nitrogen blanketing (no steam), which drives the oxygen out of the headspace., For sale is a VTB Glass seal machine (Model VM 105 Twist Off) in good, used, and fully functional condition., The machine is currently still in operation and can be inspected at any time by arrangement. It is ideal for the Food industry (e.g., canned foods, sauces, jams) and convinces with its robust stainless steel construction as well as reliable sealing technology., Inline sealing machine for twist-off closures, Integrated Lid sorting for 58 and 66 closures, Gas purging system (optional, usable) for longer shelf life, Pressure rollers for reliable sealing, Transport belt with adjustable side guides, Height adjustment for different glass formats, Operator panel rotatable and swivel ...

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Handover: in its current condition as inspected -Housing: Damage/corrosion, see pictures -Manufacturer: Ohio Electric Motors, Permanent Magnet Motor -Type: C-561339X8829 -Power: 0.74 kW -Speed: 2200 rpm -Voltage: 36 V -Transmission: Browning Part No. 20QC56L -Translation: 7.5 :1 -Shaft: Ø 19 x 35 mm/Ø 25 x 30 mm -Dimensions: 395/210/H195 mm -Weight: 21 kg

Servo motor, gear motor, electric motor, three-phase motor -Manufacturer motor: Bautz type M256D-ON101-7000-0-EC -Voltage: 330 V. -Torque: 0.53 Nm -Speed: 5800 rpm -Gearbox manufacturer: Neugart PLE 60 -Translation: i = 3 -Shaft: Ø 14 x 30 mm -Design: B14 -Price: per piece -Number: 3 pieces -Dimensions: 260/55/H80 mm -Weight: 2.4 kg

OMGA Radial 700 Radial Saw Cutting width 90° max 700mm Cutting height max 110mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.61kw main motor Pneumatic feed of the cutting deck Net price