roll o matic used for sale

Used Used Shrink Wrapper Ocme Vega HT 150: Year: 2017 Condition: Good Used Shrink Wrapper Ocme Vega HT 150 Year: 2017 Speed: 150 cycle/minute Model: VEGA HT 150 Type: at film launch Suitable for packaging 330 Sleek cans Number of files: 8 Entrance tapes included Safety protections Code: F 75 More details: https://bottlingscout.com

EDM machine Ingersoll OPS 600

Milling machine Optimum Optimil F 105

Used Used Depalletizer Ocme pegasus 160m Pallet Wrapper Tosa: Year: 2011 Condition: Good Used Depalletizer Ocme pegasus 160m Pallet Wrapper Tosa: Model: Pegasus 160M Year: 2011 Speed: approximately 2.5 layers per minute Type of operation: layer by lifting (only boxes) Automatic interlayer remover system Empty pallet exit roller conveyor PALLET WRAPPER TOSA Model: 120 Year: 1995 Speed: 20 pallets/hour Wrapping by rotating arm Top sheet stretching device Pre-stretching PLC and operator panel replaced in 2018 Safety Protections Code: D 90 More details: https://bottlingscout.com

Used Used complete bottling vinegar line: Year: 2007 Condition: Good Used complete bottling vinegar line: Suitable for glass and pet bottles Speed: 6.000 BPH Direction: clockwise Ocim filler Year 1995 32 Valves Pal sterile filtration system with pre-filter (8 triple) + final filter (5 triple) Safety protections Bertolaso capper Year 1994 ? Overhauled 2010 5 heads Aluminum screw 31.5X18 Pressure plastic cap Cavagnino & Gatti labeler Year: 1994 ? Overhauled 2007 7 heads 2 glue stations for Front Back Printer by needles Formats included: Dorica 250ml. ? 48 mm. Toscano 500 ml. ? 57 mm. Marasca 500 ml. Side 57 mm 1 lt. Glass ? 85 mm. 1 lt. Pet ? 82 mm. Cylindrical format ? 66 mm. Sotemapack wrapping machine Year 2007 Packs of 12 bottles (4X3) Sealing bar Bundles with layer Devider included Code: NP 665 More details: https://bottlingscout.com

1.0 pcs, gebr. Automatic closure machine Manufacturer: OPITZ Type: GO 758 S Year of Make: 2016 Control: SIEMENS SIMATIC Air connection 6 bar Equipment: -Wet bonding -Width and height adjustment via control

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

Key data: 1500 KG, 2700 mm, 3600 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction 2021 Shelf width 2,700 mm Shelf load 1,500 kg Field load 1,500 kg Articulation length 1,850 mm Frame height 3,600 mm Number of stands available 64 pieces Number of trusses available 102 pieces Max. running length approx. 179 m Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used pallet rack, manufacturer Galler, type OMEGA, without goods, only the pallet rack We would be pleased if this pallet racking warehouse is interesting for you. Your service team Mertens & Frowein GmbH

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

Perkins Olympian GEH 200 kVA Supersilent generatorset, With:, - 400 Ampère breaker, - Supersilent canopy, - Internal fuel tank with a capicity off 500 liters, - Auto start and manual start, - Oil drain pump, - Intercooler, - Turbo, - Engine protection, - Battery charger, - Control panel, - Internal exhaust system, Motor Brand : Perkins, Type : 1300 Serie, Cooling : Watercooled, Cilinders : 6, Rpm : 1.500 rpm, Generator Brand : Olympian, Type : GEH200, Capicity : 200 kVA, Phase : 3, Cos phi : 0,8, Voltage : 230/ 400 Volt

- Complete machining with twin spindel, upper and lower turrets - Kitagawa 3 chuck left and right - Tool holders with driven tools axial and radial - Large jaws cabinet with inserts - OGL Gantry loader with ca 10 Kg load capacity - Chip conveyor - Paper Filtration Pressure Tank

Cylinder 63/28/630 ORSTA TGL 10906/7 W 63 mm Shaft 40 mm. Stroke 630 mm. M22 x 1.5 thread. D hole 40 mm. Length one 85 cm 2 x M22 x 1.5 mm Pressure 165 bar All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

TECHNICAL DATA: Saw blade: Ø 500 mm Installed power: 5.5 kW Accessories: 01 Infeed roller conveyor: 3000 mm (idle) 01 Discharge roller conveyor: 1600 mm (motorized)

Code: 0317 Brand: OSAMA Model: S4R-P - CE Standard Automatic 4 rollers gluing machine with 2 motors for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Technical data: Working width mm 1400 Working height mm 0-100 Work surface height mm 890 Spreading roller diameter mm 250 Overall dimensions mm 2450 x 1300 x 1600 h Weight kg 830

Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Key data: 6000 mm, 2 mm

to sell on behalf of: Hydr. CNC Long Bending Machine OEMB H200.60 Bending capacity 6000 x 2 mm (aluminium 3 m m) With hydr. Adjustable upper beam (adjustment sheet thickness / radius) With hydr. Roller shears with parallel stop with CNC control approx. 6500 kg

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

TECO Office 600 All FUll time surge protection

This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details.

internal diameter: - mm grinding depth: - mm swing diameter: - mm : 220 mm : ja total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis HUBER OCT-3020 NA die-sinking EDM machine was manufactured in 2006. It features a travel of 300 mm in the X-axis, 200 mm in the Y-axis, and 350 mm in the Z-axis, accommodating workpieces up to 460 x 210 x 200 mm. If you are looking to get high-quality die-sinking capabilities, consider the HUBER OCT-3020 NA machine we have for sale. Contact us for further details.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.

plate thickness: 4 mm roll diameter: 125 mm throat: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Pre AOI - Automated Optical Inspection System Koh Young Pre AOI systems use high-resolution optical imaging and advanced inspection algorithms to verify component presence, placement accuracy and solder paste coverage on PCBs prior to reflow. Integrating a Pre AOI station into an SMT line significantly reduces defect rates, rework costs and scrap by catching errors at the earliest possible stage in the assembly process. Find more here - / Contact us at -

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Post AOI - Automated Optical Inspection System Koh Young Post AOI systems use high-resolution 3D optical imaging and intelligent inspection software to verify solder joint quality, component placement and board integrity after reflow soldering. A Post AOI station is an essential quality gate in any high-reliability SMT production line, preventing defective boards from advancing to final assembly, test or customer delivery. Find more here - / Contact us at -

Manufacturer: Opelka Model: MB 50 VTEI Year of Manufacture: 2016 Machine Type : Deep Fryer Power: 9 kW Voltage: 3 x 230V Oil / fat tank capacity: 52 litres Weight: 220 kg Dimensions (L x W x H): 1200 x 900 x 1650 mm Construction: Stainless steel, on castors Find more here - / Contact us at -

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

turning diameter: 340 mm turning length: 950 mm control: OSP P300L turning diameter over bed: 580 mm turning dia. over face-slide: 470 mm Workingspindle:: power capacity - main spindel: 22/15 kW turning speed range - main spindle: 45 - 5000 U/min spindle diameter: 120 mm spindle bore: 80 mm max. bar capacity: 72 mm spindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nm travel -z axis: 1010 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min x - axis: travel -x axis: 260 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min y-axis: 120 mm total power requirement: 31,7 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,2 x 1,8 x 1,8 m â½ing and milling centre equipped with: - CNC control OSP P300L - NC tailstock - 12-position turret with driven tool station (BMT 60 ...

Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t

Product protection workbench with horizontal, low-turbulence displacement flow. ISO Class 5 with UV-Light.

Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

B&A REF: 9242 TON: 270 SCREW DIAMETER: 65MM SHOT WEIGHT: 840 STROKE VOLUME: 8063CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 860 X 860MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 630MM MAX DAYLIGHT: 1360MM EJECTOR STROKE: 220MM CONTROLS: SEF100 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 20KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Fully automatic. syringe labeling machine for 1ml long syringes with reject system. Output: up to 24,000 syringes/h. The labeller is in line with: Denester INOVA/ OPTIMA, Renester INOVA/ OPTIMA, inspection plant SEIDENADER. The machine includes a wide range of accessories.

A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.

Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fiber laser cutter OTINUS 1500x3000 3 kW with covered cutting head

Fiber laser cutting machine OTINUS 1500x3000 12 kW closed with exchange table

Hydraulic press brake 120x3100

Fiber laser cutting machine for profiles and pipes 3kW 230x6000 mm

Hydraulic guillotine shears 6 × 2500 mm

The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...

UV printing machine Type: Colorado 1640 Manufacturer: Océ Year: 2018 Printed: approx. 29,400 m² Canon UVgel technology – high quality, speed and durability of printing Suitable for banners, stickers, posters and other applications Low operating costs and stable results ONYX RIP software Find more here - / Contact us at -

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The GEA decanter is sold together with the PLC control system and was used in oil production. The decanter has a central lubrication system and has been running for more hours.

This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine.

This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine.

OPTREL PWL, SEMI-AUTOMATIC INSPECTION MACHINE Semi-automatic inspection machine for small volumes and products requiring inspection. Particles and imperfections are visually checked by an operator with a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS Wide product range (ampoules, vials and cartridges for injectable liquid products) Change parts optimized for quick change over and small footprint (size: 2250 x 1750 x 2100 mm) Output: 100 units/min Working height: 900 ± 25 mm

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories