128,430 used machines on RESALE, but how to find them? Machine Search
- Chip conveyor - SMW 315 3 chuck - 2 x Radial live tooling holders - 2 x Axial live tooling holders - Spindle bore 80 mm - BMT-Tooling system - Tool measuring probe - Spindle hours 6960 / 6270 Running hours
- Chip conveyor - SMW Front and Rear chuck 700 mm - Double revolver 6+8 positions - Big Bore 360 mm - Tailstock with power quill - Tooling package included with inserts and jaws
- Table length : 1900 - Table width : 1000 - Steady arm throath HOR : 670 - Steady arm throath VER: 940 - Stroke cylinder : 350 - Column diameter : 200
Used fluidised bed dryer mady by Bühler, model OTWG-280, new 1995. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.
OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold
2 pieces Revolver automatic lathes, Fabr. Index, Type OR with many accessories Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds: 10 pieces Minimum spindle speed 950 1/min Maximum rotation speed of the spindle 7500 1/min Weight of the machine 1 t (for more data see nameplate)
Specifications: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Wheel spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Tool holder inside ISO No. 50 DIN 2079 Tool holder outside ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds infinitely variable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step Jump 1:2 Constant power range 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x direction infinitely variable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y- and z- direction infinitely variable from 20-500 mm/min. Rapid traverse for y- and z-axis 1,00 ...
Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg
Voor een Afrikaanse klant hebben we een afrol- en op maat snijlijn opgeknapt en uitgerust met een eenvoudige, gebruiksvriendelijke Elgo-bediening.
Bofa AD Oracle iQ fume extractor, air filter, dust collector for laser or other. In new condition, with new filters. Manufacturer: Donaldson Bofa Type: AD Oracle iQ Voltage: 115-230V Unlimited airflow (+/- 10%): 410 m3/h Adjustable airflow range: 100-380 m3/h Pressure (+/- 10%): 95 mbar Dimensions (H x W x D): 975 x 455 x 505 mm Weight (+/- 5%): 65 kg Noise level:
Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.
Type: OPF600 Serial number: 1541 Year of construction: 2005 Belt width: 600 mm Power: 3 x 400V, 50Hz, 2.5kW Dimensions: 3000 x 1700 x 2100 mm Weight: 1025 kg
A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.
: max. 800 mm turning length: max. 800 mm chuck: ohne documentation: inkl. Control: weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)
0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 200 mm bore stroke: 105 mm table surface area: 360x340 mm Distance spindle/table max.: 540 mm turning speed range - stepless: 120-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 400 mm z-travel: 400 mm Control: INGERSOLL ANDRONIC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling center with 8 tool changer. Functional areas are still being built. Comes from research facility and is relatively little used.
Key data: 650 mm, 1500 mm
Manufacturer : Okuma Multus U 4000 1 SC 1500 Big Bore Control : OSP P 300 S with 3D-M-E kit; IGF Advance M-E kit Year of construction : 07/ 2014 Switch-on hours : approx. 19500 h Spindle hours : approx. 12500 h Availability : direct from location Specifications Turning Ø over bed: 650 mm Distance between tips: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum rotatable length: 1,500 mm Rod passage (main spindle): Ø 112 mm ( Pull tube 90 mm ) Spindle Nose (Type): JIS A2-11 Spindle speed: 45 - 3000 rpm Motor: 30/22 kW (30 min/cont) Max. torque : 955 Nm X-axis: 695 mm Z-axis: 1,600 mm Y-axis: 300 [± 150] mm B-axis: -30° to +210° (0.001° ) as full NC axis C-axis: 360° (0.0001° increment) Milling spindle: Tool holder : Capto C 6 Number of tools: 80 positions Spindle speed: 50 - 12,000 rpm Engine: 22/11 kW Dimensions and weights: F ...
A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.
BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
x-travel: 550 mm y-travel: 305 mm z-travel: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle:: turning speed range - main spindle: 10 - 10.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 70 / 48 Nm tool taper: BT 40 work table:: table surface area: 800 x 320 mm max. table load: 300 kg T-slots: 3x 14 x 100 mm distance spindle /table: 100 - 600 mm Tool-Presetter:: number of toolpositions: 12 pos. tool taper: BT 40 max. tool diameter: 70 mm max. tool weight: 6,0 kg change-time tool to tool: 7,0 sec feeds:: rapid traverse ( X / Y / Z ): 10 m/min feed speeds: max. 10.000 mm/min repeating accuracy: +/- 0,008 mm positioning accuracy: +/- 0,01 mm total power requirement: 15 kVA weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3,5 x 2,5 x 2,4 m Documents: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo ...
CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:
Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry Steam Cleaner Vapor pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used
An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.
Gastronorm, HACCP, 600/400, large quantities
Thermo pens, new and used insulated boxes, cooling and freezer boxes, warming boxes, HACCP, with AKKus, 600/400
Shot blasting machine Working pressure: 0.6 MPa, weight: 7,622 kg, modernized by: Bogdan Gacioch. The machine is complete and functional.
hollow: 4000 m3/h volt: 400 V Hz: 50 KW: 3 weight: 260 kg Electric air purifier The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment.
weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
halbautomatische korpusklemme für möbel modell ORMAMACCHINE PN 30 gebrauchte maschine Technische Daten : Manuelle Beladung maximale Nutzmaße mm.2200 x 600 x 1200 mindestnutzmaße mm.250 x 600 x 280 motorisierter horizontaler Querträger manuell verschiebbare vertikaltraverse n.6 vertikale zylinder n.4 horizontale zylinder Zylinderhub mm.70 installierte Leistung kW 0,30 gesamtmaße mm.3000 x 800 x 2100 h Gewicht kg 1200
SPECIFICATIONS: Work table size: 1000 x 310 mm Working depth: 130 mm Longitudinal stroke of the work table: 400 mm Transverse stroke of the work table: 150 mm Installed power: 2.95 kW EQUIPMENT: 02 Workpiece stop guides Accessories
Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg
Overview This palletizing and winding line consists of an Ocme palletizer and two Robopac Genesis stretch wrapping machines, both manufactured in 2014. The line was designed for handling shrink containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production output of 30,000 bottles per hour, depending on the format. The grouping of the layer formation is done by two Fanuc robots. There are two more Fanucs for the palletizing and the adding of an intermediate layer. The palletizing and winding is part of a complete line, from which some components have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450 Year of construction: 2014 Products processed: Shrink packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet Formats: Euro Pallet 800 x 1200 Chep Duesseldorfer 6 ...
Cylindrical adhesive applicator OSAM S2R-1300 + disc table OSMA TDM Working width 1300mm Maximum working height 100mm Manual adjustment of the working height 2 up-down glue rollers Disc table OSAMA TDM 1300-3000 Ce Year of manufacture of the set 2018 Total length of the set 560cm
pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 255 mm stroke: 165 mm dayligth: 475 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCM edgebander mod. Used OLIMPIC K1000 control panel with membrane keypad Technical data: Min. height of the panel 8 mm Max. panel height 55 mm Min. thickness of the edge in roll 0.4 mm Max. edge thickness in roll 3 mm Max thickness of wooden edge mm. 12 Composition: Strip edge stock Glue tank capacity kg. 1.5 with independent motor Nr. 4 counterpressure rollers with pneumatic thrust and 1st roller with independent motor Shear cutting edge in roll Trimming unit with 2 independent motors tilting 0-15° - each KW 0.35 - 12.000 rpm Overlapping trimming unit with 2 motors each KW 0.65 - 12.000 rpm - tools with reversible knives Tilting gleaning unit for flat-edge and radius finishing; r. 2 motors each KW 0.5 - 12,000 rpm with electro-pneumatic positioning - tools with reversible knives electropneumatic group override Glue scraper assembly ...
Komptech Multistar ONE Category: Star Screen Specification: Serial Number: 7322 Year of Make: 2021 Power: 80kW Max. flow rate: 250 m3/h Weight: 24 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Machine was reconditioned and equipped with new screen decks.
Printing line with Oce Variostream model 7170, serial number 37248 and Lasermax rewinder model RW 100. All in production ready condition and still under power.
Key data: 130 mm
Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Industri ...
Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.
chamfer lenght: Gesamt ca. 1750 mm Packing: ca. 1900 x 200 mm Shipping weight: 550 kg 7-piece bending tool Individual lengths approx. 100 / 155 / 180 / 245 / 255 / 300/ 510 Profile approx. 20 x 20 mm Height approx. 145 ( 165 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime ...
Key data: 3000 mm, 2000 mm, 1150 mm
X-axis: 3,000 mm Y-axis: 2,000 mm Z-axis: 1,150 mm Table dimensions: 2,800 x 1,500 mm Spindle mount: ISO 50 Spindle speed: 30 - 6,000 rpm Tool changer: 50 places CNC Control: OSP7000M Stand spacing: 2,050 mm Equipped with: - Angle milling head - Touch probe button - Double chip conveyors (recently renewed) - Cooling plant (recently renewed) -Operating instructions Country of origin: Japan Machine LxWxH: 9,000 x 3,500 x 3,500 mm +/- Machine weight: 27,500 kg
maximum number of results exceeded
please refine your search
