roll o matic used for sale

Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40  ...

Flatbed panel and panel machining center equipped with three, four or five CNC axes. These CNC machines are suitable for the processing of solid wood panels – HPL – laminate boards such as FUNDERMAX® – chipboard – MDF boards – plastic boards (e.g. – PVC / PE) – synthetic resin boards and other boards and panels that can be tensioned by vacuum. The machines of the PLANUS series are offered with two different clamping options. - In version 1 - the material tension is done by vacuum on a synthetic resin plate - in version 2 - the material tension is also carried out by vacuum, but the suction blocks are located on tensioner bridges that can be moved lengthwise. Drilling – milling – sawing, all with one machine. The machines can be configured according to the customer's requirements. - Milling spindle drive power 11 kW to 18 kW - Tool holder in the SK30/SK40  ...

Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 Memory Subrmodule Eprom, 32K -Type: 6ES5373-OAA41 -Dimensions: 55/15/H95 mm -Weight: 0.1 kg

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

In-line drilling rig with 8 height- and width-adjustable drilling spindles (optionally up to 12 drilling spindles and an extension to a drilling area of 4,000 mm x 240 mm – without moving the workpiece) VIDEO LINK on request Drive power 0.75 kW per drilling spindle (optionally, the system can be supplied with more powerful drilling spindles - 1 kW / 1.25 kW - 1.5 kW), drilling spindle speeds up to 12,000 rpm - infinitely variable via potentiometer and frequency converter - set speed can be read analogously, drill tension by collets ER25, largest drill diameter 12 mm, drilling feed speed infinitely adjustable, drilling depth of each drilling unit individually infinitely adjustable, largest drill slide stroke 80 mm - Adjustment range for angled holes +/- 30 °, smallest distance from drill center to drill center 110 mm, horizontal adjustment range of the beam of the drilling units  ...

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

1 of used capper for sports-caps, make Officine Ave, type TAR 8T Pick&Place, new 1997, operates from left to right. Used for 500 ml PET bottles.

0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

Automatic rebating machine / automatic cross-cutting machine 2 spindles

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, Eprom -Manufacturer: Siemens Simatic S5 EPROM memory module ovp -Type: 6ES5376-OAA21 -Number: 1x module available -Cardboard dimensions: 60/55/H15 mm -Weight: 0.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, double hydraulic pump -Manufacturer: Orsta, double hydraulic pump -Pump 1: Type A 6.3 R -Pump 2: Type C 16-2 R -Motor: VEM KMR 112 M4 5.5 kW / 1440 rpm -Total dimensions: 725/250/H290 mm -Weight: 65 kg

OKUMA MULTUS U4000 1SW 1500 Mfg. Year 2016, Installed 2018 OSP P300S control Movements: X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,600 mm W-axis: 1,554 mm B-axis: -30° to +210° max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Big Bore sub spindlel 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Milling spindle 22 kW, max. speed: 12,000 rpm Full B-axis Tool magazine for 80 tools High accuracy option C-axis on main and sub spindle Hydraulic steady rest, SMW Autoblok K4 - Clamping range: 30-245 mm Preparation for Multitool Renishaw System, RMP60 probe Renishaw TRS2 Tool Breakage detection swarf conveyor Mayfran MT10 20 bar high pressure pump API Library 2 One-Touch IGF Advance M-D Kit Helical turning function Z-axis automatic zero point offset by touch sensor main and sub spindle C-axis automatic zero offs ...

Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg

Washcloth changing stand OMS WM 1050; cleaned and tested; Working width 1050mm; 230V. Cloth changer OMS WM 1050; cleaned and checked; working width 1050mm; 230V.

mechanically switchable clutch, releaseable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling type 100110405 35-12 -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 405/212/H213 mm -Weight: 41 kg

mechanically switchable clutch, detachable clutch, power clutch, clutch -Manufacturer: Ortlinghaus, coupling without type designation -Translation: i= 1:1 -Shafts: Ø 24x60 / 24x55 mm -Dimensions: 310/212/H213 mm -Weight: 32 kg

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel

Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 -Pump: Nominal pressure 250 bar -Drive: Behncke QU FA 00L4B-41 -Power: 3 kW 1442 rpm -Dimensions: 620/300/H270mm -Weight: 50kg

hydraulic motor, oil motor, hydraulic pump, hydraulic valve -Manufacturer: Danfoss, hydraulic motor with: valve block -Manufacturer hydraulic motor Danfoss type: OMP 315 151-0033 7 -Valve block: Hawe SK.7356-160/160 -Shaft: Ø 25 x 40 mm -Dimensions: 240/130/H200 mm -Weight: 9.8 kg

CNC lathe Okuma Genos L300E-M incl. Samsys bar feeder M3000SL Control: OSP-P200L-R Turning length 1,250 mm Turning diameter 300 mm Spindle passage 70 mm Turret: 12 seats – all powered Speed: 45 – 4,500 rpm Tool holder: VDI 40 Accessories/Equipment -Conveyor - 3- Jaw chuck Ø 250 mm - Collet chuck Hainbuch - Touchsetter -Tailstock -Coolant pump - Samsys Multi 3000SL bar feeder - various accessories (see pictures)

Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Universal Kemper Model: Orion 60 Blender with stainless steel kettle Bowl capacity approx. 60 litres with tilt function 180 ° Capacity approx. 10 to 180 litres/hour Connection 400V, 6.5 kW, 16A-CEE plug Machine Many more bakery machines in stock!

Key data: 1000 mm, 950 mm, 1000 mm

Okuma MA-600 HB Space Centre Control OSP E 100M Pallet dimensions 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Travel of the Z-axis 1000 mm Indexation of Table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in Tool Magazine 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

Control: Siemens 840 D powerline Accessories: Tool holder bar loading magazine Fully functional and still under power, can be visited at any time

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

Solid-state relays, switchgear, switching components -Manufacturer: opto 22, solid state relay 6 pieces with heat sink -Type: 480D45-12 -Quantity: 2x assembly available -Price: per assembly -Dimensions: 300/200/H70 mm -Weight: 3.4 kg/pc.

Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Hydraulic pump, oil pump, gear pump, hydraulic unit -Manufacturer: ORSTA, hydraulic pump with clutch bell -Pump Type: A25R -Clutch bell: IWK 8420523 -Shaft: Ø 22 x 25 mm Recess: Ø 250 mm -Hole circle: Ø 300 x 18 mm -Dimensions: 285/285/H245 mm -Weight: 7.1kg

Key data: 200 KW, 250 kVA, 400 V

Make Olympian Model: GEH275-4 Year of manufacturing: 2014 Serial nr: OLY00000VMPN08908 Working hours (on servicemeter): 7899 Capacity (KvA) 275 hrs / 250 prp Capacity (Kw) 220 hrs / 200 prp Engine make Perkins Engine model 1300 series Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 397 Dimensions LxWxH (mm) 3050 x 1050 x 1850 Weight (Kg) ca 2500 Total quantity in stock 1 Country of origin United Kingdom Comments Fair used generatorset

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Opem Colibri 4 S bagging machine - Used for Senseo pads - Perfect working condition - Free immediately -

HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500

AUTOMATIC DOUBLE MITRE SAW model OMGA TR 2B N oleo second hand machine in Excellent working condition , like new for cutting wood, frames, pvc, aluminium, plastics and various materials CE compliant machine: YES oil pneumatic downstroke of the blade groups alternate or simultaneous blade descent inclination of cutting blade groups + / - 45° bimanual control from the control panel n.02 motors . power Hp 3 each one blades diam. mm. 350 max. useful cutting length mm.2800 min. useful cutting length mm.320 max. useful cutting width 90° mm. 170 x 102 H max. useful cutting width 45° mm. 110 x 102 H volt. 380/50 weigth kgs. 600