roll mill used for sale

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper. Material 316/316L stainless steel Transport information Length 2300 mm Width 2000 mm Height 2000 mm Weight 1500 Kg Condition As is Made by Unknown

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Brandt, Type: Eckenkopierautomat, Year: ca.1995, Control: hand, Monting of the machine: 1 Fräsmotor mit tastung, Year :ca.1995

Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992

Manufacturer: Hobelkopf 4 Messer, Tool diameter mm: 1 Stück 180 X 140 X 35, Bore mm: 35, Number o knifes: 4,

Manufacturer: Hofmann Eckverbinder Maschine, Type: PU, Control: hand, Min.-max. workpiece height in mm: 150, Vertikal moulding unit: 1, Groove saw: Schwalbenschwanzfräser, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 115, Total power kW: ca.1000 watt,

Manufacturer: Homag Fräsständer Bündigfräsaggregat, Spare part from machine: KF Maschine, for right machine side: rechts, Number of motors: 2, kW-Leistung : 1,1, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: no, kW-output 2: 1,1/300,

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Homag , for left machine side: yes, for right machine side: yes, Number of motors: 2, Motor : Perske, kW-Leistung : 1-1,5, Volt/Hz : 220-380/50-100, Drehzahlen U/min : 2670/5710, Siko Anzeige : yes, Horizontal Rollentastung : no, Pneumatically controlled: no, Shaft dimensions L x D mm: 30, Slewable vertically: yes, Motor 2: Perske, kW-output 2: 1,5, Volt/Hz 2: 220-380/50-100, Speed rpm 2: 2670/5710, Silo indication 2: yes,

Manufacturer: Homag Eckenkopiergerät FK 03, Ersatzteil aus Maschine: Homag KF , für Maschinenseite links: yes, für Maschinenseite rechts: yes, Motorenanzahl: 12000, kW-Leistung : 0,55, Volt/Hz : 380/200, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: yes, pneumatisch gesteuert : yes, FREE TEXT: zum Bearbeiten der Kantenüberstände an der Werkstückober- und unterkante sowie zum Umfräsen der Werkstückvorder- und hinterkante,

Manufacturer: IMA, Ersatzteil aus Maschine: IMA Combima, für Maschinenseite links: yes, Motorenanzahl: 2, Motor : yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, Revolver Verstellung: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Manufacturer: IMA,

Manufacturer: Lehbrink , Type: WL 38, Year: 1991, Control: Programm, Work piece winding off lenth max. mm : 3000-550, Through running lenght (Cutting lenght) max. mm: 550, Work piece thickness min mm: 10, Angular adjustable saw supports: yes, Pneumatically going in/out: yes, Fräsmotore Stk: 4, Power of milling engines kW: 4,2, Fräsmotore U/min: 6000, Automatical foil glueing device: yes, Scoring unit for foil glueing: yes, Length stopper: yes, Year :1991

HBM Wotan WMO B105, CNC control system Siemens 820M

x-travel: 700 mm y-travel: 250 mm z-travel: 300 mm table-size: 1000 x 230 mm spindle taper ISO: 40 spindle turning speed range: 35- 1500 U/min quill stroke: mm total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slot counter spigot outside inside

SC3503.11.001 BB3503.11.001 68-92 mm further data on request

Tool used 320x24x58, n 5600 - 2300 HW, BLAA further data on request

Gear Hobbing Machine Pfauter P 400 With interchangeable wheels 

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

Gear hobbing machine horizontal Pfauter P160 With accessories

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661

Key data: 700 mm, 450 mm, 450 mm

Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Immediately available from location, CNC control Heidenhain TNC 155 Travel X: 600 mm Travel Y: 200 mm Travel Z: 150 mm Max. workpiece weight: 300 kg Table clamping surface: 800 x 300 mm Table height: 800 mm Spindle speeds infinitely variable 40-2000 rpm, Drive power 4 kW, Stepless feeds in all directions, Dimensions L x W x H: 2200 x 2700 x 2400 mm Weight approx.: 2000 Kg

The Continuous Galvanizing Line No. 3, built in 1983 by NKK-Hitachi, offers a production capacity of 300,000 tons per year, processing low carbon steel coils with widths ranging from 610 to 1,300 mm and thicknesses of 0.27 to 2.3 mm. The line operated until March 2019. This left-hand line includes advanced features such as a high-capacity furnace, air knife wiping system, and a skin pass mill for superior surface quality. The line's equipment is designed for maximum coil weights of 45,500 kg and speeds up to 200 mpm. Its robust configuration, including multiple bridle rolls, deflector rolls, and chemical treatment tanks, ensures efficient galvanizing. The line's modern furnace output reaches up to 50 tons per hour, making it a high-performance solution for large-scale steel galvanizing operations. Make: NKK-HITACHI Year of manufacture: 1983 Mothballed since: Ceased producti ...

1 pcs used tool milling machine Make of lid Model FP 3 A Control Dialog 11 Technical data: Travel X,Y,Z 400,300,400 mm Clamping area 700 x 400 mm Quill stroke 80 mm Spindle drive 3kW Speed 3150 rpm Spindle holder SK 40 Machine dimensions L x W x H 2400/2200/1900 mm Machine weight approx. 2500 kg, Accessories: Grundig Dialog 11, fixed angle table, electronic handwheel, documentation Errors of technical data and prior sale excepted

Batch ball mill made in Germany with a gross volume of 400 l., drive via V-belt and gear motor with 2.2 kW, iron-free lining (aluminium oxide), previous use: glaze production in the wet grinding process. Cleaned, repainted and restored. Available for an extra charge: iron-free grinding media (balls, alubit).

Key data: 630 mm, 500 mm, 460 mm

Speed range: 31.5 - 3150 rpm Control Heidenhain TNC 155 Feed speed: 1 - 3000 mm/min. in rapid traverse X -Y: 6000 mm/min. in rapid traverse Z: 4000 mm/min.

This grinder has 1 fixed blade and 3 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

: 585/600 mm : 465/480 mm : 385/400 mm : 900x500 mm : 1200x250 mm : 40-2000 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

British Rema classifier mill already dismantled.

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely re ...

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

Vertongen Tenoning Machine P04 year 1979 S/N 5811 in great condition from a vocational school in Finland Included with tools Automatically adjustable tenoning machine Saw unit, max cutting height 130mm, spindle 30 mm /3000rpm, 400mm diameter saw blade 2 horizontal cutter blocks diam 160mm, spindle diameter 40 mm /4500rpm 2 vertical spindles 40 mm working height 160mm, 4000rpm ( Top + bottom ) 1 vertical spindle 40mm, working height 160mm / 4000rpm all spindles are adjustable in the horizontal and vertical direction Tenoning carrige 1000x280mm Sliding guide 2400mm with manual pressure and fence Power 380V 3-phase 50Hz Extraction needs (dust collector) 2400 m3/h Weight approx.1100 kg technical information under subject for corrections

Ho Chun UH-1250A - CNC Bed Milling Machine - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods in all axes - Ball screws - Hydraulic tool feeder - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened membranes - Plastic-coated counter guide -Electromagnet. Main spindle brake - Automatic central lubrication - Integrated coolant system - Steel telescopic cover for transverse path - Steel telescopic cover for longitudinal travel - Work light - Year of construction 2011 Specifications Workbench: - Table clamping surface: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel: - X-axis longitudinal travel: 1250 mm - Y-axis transverse travel: 540 mm - Y-axis - transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and stand: 500 mm Stand: - Z-axis ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm   total height: 2700 mm   total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and vari ...

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

Tool diameter: mm sanding disc diameter: mm Motor output: 5 kW total power requirement: kw Weight: 1.500 kg Overall size: mm Control: cnc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: The mill is in overhauled condition. The machine housing has been completely overhauled. Rotor is equipped with new blow bars. Impact mechanisms and lateral wear plates are new. incl. three-phase motor 45kW, B3, voltage 400/690V, 50Hz, 1485/min. incl. hydraulic power unit, 3kW incl. V-belt pulleys for mill and motor Comprehensive spare parts package consisting of: - 3 pieces of rotor used (in good condition) - 1 piece rotor new - Various pallets with blow bars, wear pieces, impact mechanisms, etc. - Inlet hood

MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg