137,237 used machines on RESALE, but how to find them? Machine Search
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® 0i-F Plus on Fanuc Touch CNC Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range - 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40 ...
This 3-axis HAAS GR-712 was manufactured in 2010. It features an impressive X-axis travel of 3,683 mm and Y-axis travel of 2,159 mm, providing a robust working area with table dimensions of 3,658 x 1,829 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and an ATC capacity of 20 stations. If you are looking to get high-quality milling capabilities, consider the HAAS GR-712 gantry milling machine we have for sale. Contact us for further details.
This 3-axis HAAS GR-510 gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 3,073 mm and Y-axis travel of 1,549 mm, with a robust table size of 3,099 x 1,346 mm. The machine has a maximum weight capacity of 2,722 kg on the table. If you are looking to get high-quality milling capabilities, consider the HAAS GR-510 machine we have for sale. Contact us for further details.
Travels X/Y/Z: 500mm/400mm/350mm, rotary table diameter: 400mm, spindle taper: SK40, spindle speed: 5000rpm, additional quill travel: 50mm, tool positions: 16, control: Philips 432, machine operating hours: 13400h. Including electronic handwheel and retrofitted LED monitor. The machine was used in single-shift operation. Documentation available. Inspection possible by appointment.
about 19500 meters Auction-ID: A1-50513-86
Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I
End mills GEFRA u.a. HSS end mills 12 to 40 mm 43 pieces used, tested ! Dimensions: 400 x 200 x 100 mm
Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW
Key data: 2500 mm, 1600 mm, 1000 mm
Stock number: 3949 CNC BED MILLING MACHINE Manufacturer: SORALUSE, Type: TL-25 Machine NO.: 101016, Year of manufacture: 1998 Specifications: Table size 2860 x 1000 mm Large table load 7500 kg Longitudinal movement (X) 2500 mm Transverse movement (Z) 1000 mm Vertical movement (Y) 1600 mm Spindle Taper 50 ISO Stepless spindle speeds 20-3000 rpm Spindle motor power 22 Kw Total power 38 kW Tool changer 30 stations Control Heidenhain TNC 426/430 CB Fabr. Controlled vertical head 2.5 degrees Spindle Hours 12272 Hours Rapid traverse 15 m/min Accessories: Cooling by spindle Chip conveyance. Cooling water system. Electronic handwheel Line measuring system Various accessories. Length: 9500 mm, Height: 3820 mm, Width: , Weight: Approx 25.000 kg
Angle milling cutters, indexable insert milling cutters WIDAX, HEINLEIN, WIDIA 01-000546-002-2 274.274.06.119.00 diameter: Ø 242 mm 6 cutting edges with 6 holders each for inserts bore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear) flange (rear) Ø 90 mm groove width (rear) 16 mm, Depth 10 mm New ! Dimensions: 250 x 250 x 90 mm
Drum diameter: 600mm, max. rotational speed: 1,500rpm, connected load: 30kW, made of stainless steel, movable on a steel frame, equipped with INDUR screens and HEW RF 10L/2 electric motor, manufacturer unknown, suitable for food products and spices.
This 7-axis DMG GILDEMEISTER MSL60/7 was manufactured in 2012. It features a spindle speed of 5,000 rpm and a spindle bore of 60 mm. The machine includes a counter spindle and driven tools, enhancing its versatility for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the DMG GILDEMEISTER MSL60/7 turn-mill centre we have for sale. Contact us for further details.
Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm
This 5-axis KIHEUNG Volmatec KNC U1050 was manufactured in 2021. It features a Heidenhain TNC 640 control unit and has a spindle operating time of 5,624 hours. The machine comes with two milling heads and various spare parts, ensuring versatility in operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG Volmatec KNC U1050 bed type milling machine we have for sale. Contact us for further details.
Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm
This 3-axis MORI SEIKI SL-250ASMC was manufactured in 1989. It features a Z-axis travel of 520 mm and a B-axis travel of 515 mm, providing versatile turning and milling capabilities. The machine is equipped with a chip conveyor and a bar feeder for enhanced productivity. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI SL-250ASMC turn-mill centre we have for sale. Contact us for further details.
This 3-axis KAOMING KMC-2000 SV gantry milling machine was manufactured in 2008. It features a generous X-axis travel of 2,230 mm, Y-axis travel of 1,700 mm, and Z-axis travel of 850 mm. The machine includes a substantial table size of 2,000 x 1,650 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the KAOMING KMC-2000 SV machine we have for sale. Contact us for further details.
Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm
1994 Hacoba USK S1000 KSER Cone Warping machine Model: USK S1000 KSER YOC 11-1994 Condition: ready for use Working range up to 1800 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 1200 mm, 600 mm, 500 mm
Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.
OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - .ucymachines/ Contact us at - sales@ucymachines
The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...
Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg
GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - .ucymachines/ Contact us at - sales@ucymachines
Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.
Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.
Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.
2007 Union Bielefeld BF 400 U2 Bed milling machine. Mechanically it is completely fine, but there is a defect in the control system. no Machine is no longer used at all. All motors are running and mechanically everything is fine. I cant say what exactly is wrong with the control system. Find more here - .ucymachines/ Contact us at - sales@ucymachines
2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - .ucymachines/ Contact us at - sales@ucymachines
For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...
Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used 5x axis 5k hours was used for Aluminum and stainless steel 48 place tool changer 8 meter travel table Find more here - .ucymachines/ Contact us at - sales@ucymachines
Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m
JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...
JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...
Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FANUC O1 Machine length : 1350 mm Machine width : 2760 mm Machine height : 2615 mm Machine weight : 3500 kg Control unit: Enac-I Spindle speed range : 10000 1/min Spindle motor power : 7.5 kW X-axis travel : 500 mm Y-axis travel : 400 + 210 mm Travel of the Z-axis : 300 + 80 mm Maximum table load: 500 kg Table dimensions: 700 mm x 400 mm
Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Reiden Model: BFSH Condition: used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 3200 × 1000 Table Size: 1000 × 1000 Control System: Heidenhain TNC 1550 Spindle Hub: 350 × 350 Tool Holder Spaces: 130 Travel (X, Y, Z): 3000 × 1000 × 800 Max Weight: 5000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
used
GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...
used
GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...
used
GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...
A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.
used
Year: 2018 - technically efficient, ready to work - after full service - motor: 2.2 kW - automatic hydro-pneumatic feed - pneumatic profile clamping - quick cutter change system - cooling-lubrication installation
Stairs router Auction-ID: A3-46142-11265
maximum number of results exceeded
please refine your search
50 € 
