13113 results roll mill

Category: 107 sheet metal working
Latest update: 30.10.2025
approved
dealer
item-No.: 123413660

used

Location: Land-at

Category: 309 mills
Latest update: 23.06.2016
approved
dealer
item-No.: 16731031
New in: 1981

used

Location: Land-uk

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 137977976
New in: 1980

used

Location: Land-de

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Category: 109 other metal working machines
Latest update: 07.01.2026
approved
dealer
item-No.: 144603653
New in: 2015

used

Location: Land-vn

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 22405979
New in: 1968

used

Location: Land-de

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 78867737

used

Location: Land-de

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Category: 1300 other machines and plants
Latest update: 23.12.2025
approved
dealer
item-No.: 107284449

used

Location: Land-de

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Category: 109 other metal working machines
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 157485873
New in: 1989

used

Location: Land-de

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Category: 107 sheet metal working
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 157837383
New in: 1989

used

Location: Land-de

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Category: 1300 other machines and plants
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 159115567
New in: 1997

used

Location: Land-de

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Category: 1300 other machines and plants
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 124620568
New in: 2003

used

Location: Land-de

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

Category: 1300 other machines and plants
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 127547004
New in: 1993

used

Location: Land-de

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 127547006
New in: 1971

used

Location: Land-de

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Category: 1200 machines and plants for process engineering
Latest update: 12.01.2026
approved
dealer
item-No.: 132851972

used

Location: Land-de
VS

Several BÜHLER MDDK roller mills in different versions on sale. Any sort of feeding With or without inlet glass Scraper knifes, single or divided spout Plain rolls or corrugated rolls Size 1000 mm or 800 mm with roller diameter 250 mm Our specialists will provide a liable solution with used Buhler MDDK roller mills at good value.

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 136360125
New in: 2009

used

Location: Land-de

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 137539074
New in: 1969

used

Location: Land-de

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Category: 1300 other machines and plants
Latest update: 29.12.2025
approved
dealer
ankerimg
item-No.: 138192009
New in: 1976

used

Location: Land-de

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

Category: 1300 other machines and plants
Latest update: 12.01.2026
approved
dealer
ankerimg
item-No.: 164322428
New in: 1984

used

Location: Land-de

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

Category: 1300 other machines and plants
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 142605743
New in: 1962

used

Location: Land-de

Qty. 1 Second-hand Sendzimir rolling mill Mfc.: INNSE Type: ZR-22- 49” Built: 1960’s Strip width: 1270 mm Thickness Entry: 5.0 mm Exit: 0.4 mm Mill motor: 1640 kW, 2200 HP Qty. 2 Reel motors: 932 kW, 1250 HP Rolling speed: 0 – 163/288 m/min. Max. coil dia.: 1574 mm Winder mandrel dia.: 610 mm Coil weight: 21 Tons Max. tension: 300 kN Max. roll separating force: 6000 kN Work rolls dia.: 48-61 mm

Category: 1300 other machines and plants
Latest update: 27.10.2025
approved
dealer
item-No.: 167089228

used

Location: Land-by

Rieter Fine Rolling Mill - GSA 1,000800

Category: 702 breadmaking and confectionery machines
Latest update: 22.10.2025
approved
dealer
item-No.: 167407796

used

Location: Land-pl

Efficient

Category: 107 sheet metal working
Latest update: 06.04.2026
approved
dealer
ankerimg
item-No.: 153169162
New in: 1986

used

Location: Land-de

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Category: 702 breadmaking and confectionery machines
Latest update: 10.11.2025
approved
dealer
item-No.: 153869319

used

Location: Land-de

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Category: 109 other metal working machines
Latest update: 28.01.2026
approved
dealer
item-No.: 168245059

used

Location: Land-nl

FN Steel high‑capacity hybrid rolling mill - continuously modernized through major upgrades - delivers wire rod and bar‑in‑coil from Ø 5.5 mm to Ø 30.0 mm at speeds up to 100 mps. Combining technology from the three major OEMs, it offers speed, flexibility, and quality for the most demanding markets. ‘SMS-PRIMETALS-DANIELI’ High Speed Wire-Rod & Bar-in-Coil Rolling Mill Highlights Wire-rod (‘Morgan line’): Ø 5.5 –16.0 mm with pre-finishing and reducing sizing mills Bar in Coil (‘Garret line’): Ø 16.5 –30.0 mm with two coilers for higher output On-line Heat Treatment: water boxes and temperature-controlled cooling conveyor to achieve desired microstructures Capacity: > 400,000 tons per year Applications: High‑carbon, alloy, bearing, spring, cold‑heading steels Rolls & Guides’ Shop: Fully equipped workshops Spare Parts: L ...

Category: 307 rubber machines / Rolling mills
Latest update: 10.02.2026
item-No.: 168715466
New in: 1980

used

Location: Land-pl

Used Rubber Mixing Mill for Sale – C.M.P. 560 x 1500 We offer for sale a used rubber mixing mill manufactured by C.M.P., suitable for rubber compound processing in industrial applications. Technical details and equipment: Manufacturer: C.M.P. Roll size: 560 x 1500 mm Equipped with stockblender for improved mixing and compound homogenization Pneumatic rubber cutting knives Heavy-duty, robust industrial design The machine is in used condition and has been operated under standard production conditions. It is well suited for rubber processing plants and compound preparation lines. Please feel free to contact us for further information or to arrange an inspection.

Category: 1300 other machines and plants
Latest update: 06.04.2026
approved
dealer
item-No.: 159349157
New in: 2017

used

Location: Land-de

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 159511161

used

Location: Land-cz

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155195

used

Location: Land-it

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155197

used

Location: Land-it

Refer to code 1021 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155201

used

Location: Land-it

Refer to code 1022 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155207

used

Location: Land-it

Refer to code 1023 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155210

used

Location: Land-it

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 161297167
New in: 2023

new

Location: Land-de

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155212

used

Location: Land-it

Refer to code 1025 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155216

used

Location: Land-it

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155218

used

Location: Land-it

Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155221

used

Location: Land-it

Refer to code 1028 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155223

used

Location: Land-it

Refer to code 1029 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155225

used

Location: Land-it

Refer to code 1030 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155226

used

Location: Land-it

Refer to code 1031 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155227

used

Location: Land-it

Refer to code 1032 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155230

used

Location: Land-it

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161155234

used

Location: Land-it

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161229143

used

Location: Land-it

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 23.01.2026
approved
dealer
item-No.: 161229150

used

Location: Land-it

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 162710902

used

Location: Land-cz

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

Category: 107 sheet metal working
Latest update: 15.12.2025
approved
dealer
item-No.: 162738798
New in: 1964

used

Location: Land-de

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 163526827
New in: 1981

used

Location: Land-at

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 163708750
New in: 1988

used

Location: Land-de

Key data: 400 mm, 900 mm

available 35" Mill on Baseframe more details in attached description!

Category: 307 rubber machines / Rolling mills
Latest update: 10.11.2025
approved
dealer
item-No.: 163845923
New in: 1989

used

Location: Land-at

Key data: 340 mm, 700 mm

available 27" Mill Description Attached!

maximum number of results exceeded
please refine your search

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information