roll machine used for sale

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

Pastec pasta machine used with pasta trays and corresponding tray trolley. The machine is equipped with 5 dies and cutters with 3 different blades. The base frame has extendable storage bars for the trays and is mobile. The lid is slightly damaged (see picture) and the potentiometer of the cutter would have to be changed, as it cannot be finely adjusted. Video of the test run available, can be sent via Whatsapp. It is a very heavy and powerful machine for professional use. In addition to the dies for spaghetti and tagliatelle as well as pasta sfoglia (dough sheets or wide dough sheet for lasagna), there is also a die for croissants or a special shape. The mixing shaft can be removed without tools and the stainless steel screw can be pulled out to the front. Machine must be thoroughly cleaned before use Video of the test run and more pictures available

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

Travel X-axis 600mm Y-axis 400mm Z-axis 300mm U-axis ±50mm V-axis ±50mm Max. workpiece dimensions 990 x 620 x 295mm Max. table load 550Kg Max. Konik ± 21º / 100 mm Machine weight 3700Kg Machine height 2210mm Machine dimensions 2480 x 2980mm Standard Wire Diameter 0.15 to 0.3mm Max. Weight of Wire Spool (kg) 10 kg (P10) Surface quality Ra 0.35 Capacity of the water system (l) 1000 Machinery equipment Transformer Windows CE Touch Screen Controller Auto Wire Threading (AWT) SD Master Tubular Linear Actuator Collision protection X/Y/Z/U/V axles 0.1 μm linear scale resolution PC Acrylic Filter Tank Cover Standard Remote Box Water Chiller Float Gun Safety door lock 3 Filters Water Tank Design CE Conformity Configuration Clean water tank

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

Sweeper station wagon, probably ex Carraro consisting of front mounted sweeper, PTO drives with its own hydraulics, 3 disc brooms, coupling triangle holder, height-adjustable support wheel. Semi-trailer suction container, hydraulically operated, hydraulic tipping emptying, with elbow, without connecting hose and with semi-trailer chassis. The station wagon is from municipal pre-ownership, not tested and is sold as available as defective.

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

Operating voltage: 3x 380V, frequency: 50Hz, rated current: 40A, fuse protection: 50A, control voltage: 220V, DC voltage: 215/323V, an on-site inspection is possible.

Rated voltage: 380V AC, rated power: 2.4kW, rated current: 12A, components: grinding wheelhead, workpiece headstock, internal grinding attachment, machine bed, longitudinal slide, coolant system, collection tray, pneumatic system, swiveling grinding head, grinding wheel guard, metal protective covers. An on-site inspection is possible.

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Rated current: 14A, rated power: 5.4kW, weight: 920kg, with documentation. An on-site inspection is possible.

Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment.

Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment.

End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment.

TRUMPF TRUMATIC L 3030 – CNC laser cutting machine – built in 1999 For sale is a TRUMPF TRUMATIC L 3030 CNC flatbed laser cutting machine from 1999. Basic technical data: Manufacturer: TRUMPF Model: TRUMATIC L 3030 Year of Make: 1999 Machine Type: CNC Laser Cutting Machine Laser type: CO₂ laser Working range: 3,000 × 1,500 mm Travel Z-axis: approx. 115 mm Maximum workpiece weight: approx. 710 kg Control: Siemens Laser power: 3,800 W Operating hours: 73,392 h Other information: Machine condition: used Functionality: defective / has various error messages Accessories: automatic pallet changer, extraction and filter system, cooling, cutting heads Location: 35708 Haiger Viewing possible by prior arrangement.

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...

General Description CNC cordon (weld seam) cleaning machine manufactured by URBAN GmbH & Co. , model SV 530 . Designed for automatic removal of excess weld material from PVC window and door frames after welding. Suitable for integration into automated PVC window production lines. Technical Details Manufacturer: URBAN GmbH & Co. Model: SV 530 Machine type: CNC cordon cleaning machine Machine No.: 530659 Power supply: 230/400 V, 50 Hz Installed power: 3.5 kW Control voltage: 24 VDC Protection class: IP54 Original URBAN CNC operator panel Automatic profile handling table Pneumatic system with pressure gauges Cleaning enclosure Integrated conveyor system Cable chain Automatic weld seam cleaning stations Condition Good used industrial condition. The machine appears complete with CNC control console, conveyor system, cleaning stations, pneumatic equipment and sa ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...

GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...

This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details.

Reference Num.: 4480 Brand: Heidelberg Type: SM 52-6-P3+L Construction year: 2002 Impressions: 152 mio Available: 15.01.2027 Status: In production Location: Europa Printing units: 6 Equipment: - Lackiersystem - CP 2000 - Wendung 2:4 / 6:0 - Alcolor - Wascheinrichtung - IR Trockner

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

Reference Num.: 4481 Brand: Polar Type: N 92 PLUS Construction year: 2020 Available: 15.01.2027 Status: In production Location: Europa Cutting Size: 920 mm Equipment: - Programm - Lichtschranke - Lufttisch - Seitentische - Polar Rüttler - Palettenheber / Stapelheber

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

Tetra Pak TCAP/21 1000 ml ReCap 3 applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction 2004 - in very good condition - optimally maintained Subject to prior sale

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

x-travel: 8000 mm y-travel: 1500 mm z-travel: 2500 mm Control: Heidenhain Itnc 530 total power requirement: 96 kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Brand: CORREA/ANAYAK Typ: HVM 80 Build in : 2014 travel X/Y/Z 8,000 x 1,500 x 2,500 mm, Spindel : max. 6000 Rpm Spindelpower 28 Kw as extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW, table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T- slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min, Total power 96 Kw machine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagn ...

• Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left-hand side in the direction of travel Production Capabilities: • Three-side-sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 μm Equipment: • Parent-roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom-gusset s ...

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine was built by the Chinese brand FOSHAN OCPACK PACKAGING MACHINERY CO.,LTD. in 2021. Reliable and easy to operate machine, performs the process of automatic packaging of a wide range of products i.e. food, medicines and cosmetics into cardboard boxes with maximum dimensions of 130x80x210 mm. The items are transported by conveyor belt to a designated area, where they are stacked and pushed inside the box. A microcomputer together with a photocell controls and ensures that the packing process is performed accurately. The automatic carton box packaging machine is equipped with an OMRON HMI panel and an emergency stop button. The total weight of the machine is approx. 1300 kg. Technical specifications of the FOSHAN OCPACK PACKAGING MACHINERY OC-420AZ packaging machine - HMI panel: OMRON - maximum box dimensions (L x W x H): 1 ...

Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134

Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

C - Arc X-ray machine - Year of construction 2014 - possibly with video printer - DICOM prepared

This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.