roll lathe used for sale

Profile bending machine make ZOPF type ZB 70 / 2MMachine -No: 00475 built in 2000Technical specifications:Bending performance flat material: 60 x 10 mmor upright: 100 x 15 mmSquare material: 35 x 35 mmL profile: 50 x 50 x 6 mmT-profile: 60 x 60 x 6 mmShaft Diameter: 40mmRoller diameter: 152 / 162 mmShaft revolutions: 8.5 rpm.Drive power: 1.1 kWApprox. weight: 395 kgDimensions approx.: 900 x 600 x 1100 mmwith- CE marking- 7 sets of tools- 2 powered rollers- manual infeed of the upper rollerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

gebr. Roll press Fortuna fully automatic size 3, overhauled, for angular rolls, with 3 work plates, newly painted, 30-piece, weight of the dough pieces: 32 – 70 g, dough insert approx. 960 – 2100 g, 147 cm high, 69 cm wide, 80 cm deep, weight: 540 kg

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

SM74 - Damp friction cylinders - Chrome coated rollers - 2 x wet wet wipers are sold - suitable for Vario - wetlands - Dimensions: Diameter: 62 mm x Length: 760 mm - completely re-coated with water-friendly - available - immediately

Sheet thickness: 4,5 mm Bending length: 1000 mm Number of rolls: 3   Rolling width:                 1000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  3mm Top Roll Ø:                    110mm Bottom Roll Ø:                 110mm Side roll Ø:                   110mm Number of rolls:               3 Rolling speed:                 5 Power:                         4kW Length:                        1500mm Width:   ...

Currently, there are about 10 meters of traffic jam roller coaster in stock. Width: 900 mm Height: 500 mm The roller conveyors are about 3 years old and were never used. They are practically as good as new. The price is per linear meter.

For sale is only the now dismantled roller conveyor belt (not the shelves!). The roller conveyor consists of: 1 pc à 3m with 1 drive 1 pc à 3m with 2 drives 10stk à 2,8m 1 pcs of 2.4m 1 pcs of 1.6m 2 pcs of 1.4m each

Two-roll mill granite 300 mm working width 80 x 60 x 120 cm Approx. 300 kg

Nominal width: 750 mm Total length extended: 6,250 mm Total length inserted: 2,190 mm Conveyor roller, undivided, galvanized steel: 40 x 1.5 mm Roll division extended: 125 mm Smallest length of conveyed goods: 250 mm Number of double supports: Profile steel: 6 pieces Working height: 740 - 1,040 mm Swivel wheels End stop, lowerable (optional) at the acceptance end Partly with fixed plates diameter 125 x 36 mm Load capacity/linear meter 11 kg Scissors, profiled steel galvanized Paint supports: black matt

properties: Used Schrenrollenbahn Condition: used Material: Steel (galvanized) Incl. SEW motors (9 drive units) Incl. 10 feet, height adjustable Speed adjustable Expertly dismantled and packaged specifications Scissor roller conveyor of the manufacturer Schmid Systemtechnik GmbH Year of construction: 2018 Conveying width: 600mm Material: Steel Total length extended: 9.000mm Total length retracted: 4.950mm Conveying width: 1.000mm Roll diameter: 50 mm Head: 820mm to 1040mm Number of rolls: 91 pieces Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage ...

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

M. No.: T805L30030 Max. Laminating Width : 800 mm

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

Roll width 310 mm Roll diameter 130 mm Two-rolling mill was used for chocolate masses and marzipan Feed hopper in wood Intervention protection, limit switch secured

Roller conveyors, blue, approx. 10m, - used - : Price per meter ex location: only 65.-€ (net), dismantled and loaded! Manufacturer: Dematic Year of construction: unknown – probably 2008 Element width: approx. 75cm, Roll width: approx. 67cm Roll width approx. 5cm Element height: approx. 13cm Distance between the rolls varies, but mainly about 1.5cm Element lengths: different, but mainly 3m Condition: good Available: from now on Location: Frankfurt am Main – later Frankenberg warehouse (Saxony) suitable for this infiltration, curves and inclined roller conveyors RC 5710 = 90 degrees Inclined roller conveyors= 5502 approx. 3,50m

Separating table,stainless steel. standing on 4 legs,roller conveyor in the bottom,L 990 x W 570 mm

Layer-reeled solid wire for welding under inert gas in all positions. Shielding gas types: Ar, CO2 / Ar, CO2, O2 / CO2. Welding wire roll MAG wire electrode, unused, original shrink-wrapped in foil, ovp in cardboard! 15kg 1.2mm Manufacturer Union Type A600IG Probably for deposition welding Multiple available. For complete acceptance special price! Special price!

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 30 total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8,4 x 2,6 x 3,7 m Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using  ...

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Precision roller screw, RGTB 48.25.1500/2052, GSA AG, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Roller screw, type RGTB 48.25.1500/2052 R Kl.10 2AB, GSA (Gewinde Ziegler AG Switzerland) Roller thread diameter 48 mm, Lead 25 mm, Thread length 1500 mm Length of roller thread nut 113 mm, Max. Total stroke 1387 mm, Total length of spindle 2052 mm Diameter for coupling with motor 35 mm Diameter bearing seat A 40 mm, diameter bearing seat B 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand pa ...

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a used roll bar of the manufacturer Bito for sale. Included in delivery are: 01x roll strip, used Manufacturer: Bito Material color frame: galvanized Material color rolls: similar. Cream Segment length: approx. 1,580 mm Segment width: approx. 38 mm Roll width: approx. 25 mm Pitch: approx. 25 mm Roll diameter: approx. 20 mm Frame height: approx. 25 mm Material rolls: plastic Shipping costs on request

Dear customers currently we offer you a new oscillating roller grinding machine for model and mold making of the Swiss brand BMT. Here are the technical data: Length of sanding rollers: 130 mm Sanding rollersØ: 20 – 30 – 40 – 50 mm Oscillation (stroke): 12 mm and 56 strokes per minute Speed grinding spindle: 2800 rpm Machine table dimensions: 400 x 400 mm Table inclination can be swivelled forward by max. 35° Engine power: 0.25 kW at voltage 400 V (3-phase) 50 Hz Suction nozzle Ø 50 mm Weight 46 kg The scope also includes a set with grinding sleeves Inner diameter grinding sleeves: Ø 12 – 20 – 30 – 40 – 50 mm Outer diameter grinding sleeves: Ø 15 – 23 – 33 – 43 – 53 mm Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact u ...

We offer you here a used roll bar of the manufacturer Bito for sale. Included in delivery are: 01x roll strip, used Manufacturer: Bito Material color frame: galvanized Material color rolls: similar. Cream Segment length: approx. 2,060 mm Segment width: approx. 38 mm Roll width: approx. 25 mm Pitch: approx. 25 mm Roll diameter: approx. 20 mm Frame height: approx. 25 mm Material rolls: plastic Shipping costs on request

We offer you here a used roll bar of the manufacturer Bito for sale. Included in delivery are: 01x roll strip, used Manufacturer: Bito Material color frame: galvanized Material color rolls: similar. Cream Segment length: approx. 2,460 mm Segment width: approx. 38 mm Roll width: approx. 25 mm Pitch: approx. 25 mm Roll diameter: approx. 20 mm Frame height: approx. 25 mm Material rolls: plastic Shipping costs on request

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 47,3 t dimensions of the machine ca.: 6,8 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 10 mm pre-bending: 8 mn number of rolls: 4 Walzen diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,45 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 4 mm pre-bending: 3,5 mm diameter of upper rolls: 120 mm total power requirement: 2,2 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2500 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm pre-bending: 3 mm number of rolls: 4 Walzen diameter of upper rolls: 150 mm roll diam. bottom roll: 130 mm speed: 6 m/min total power requirement: 3,3 kW weight of the machine ca.: 2,47 t dimensions of the machine ca.: 3350 x 1200 x 1210 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 30 mm pre-bending: 25 mm diameter of upper rolls: 420 mm roll diam. bottom roll: 400 mm speed: 1,15 - 5 m/min total power requirement: 37 KW weight of the machine ca.: 19,04 t dimensions of the machine ca.: 5,25 x 2,3 x 2,35 mm Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2570 mm plate thickness: 16 mm pre-bending: 13 mm diameter of upper rolls: 320 mm roll diam. bottom roll: 300 mm speed: 1,15 - 5 m/min total power requirement: 22 KW weight of the machine ca.: 11,0 t dimensions of the machine ca.: 5,15 x 2,0 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kannegiesser roller curve conveyor 90° roller conveyor 60 cm The Kannegiesser roller curve conveyor is in very good condition. The roller conveyor has a motor, with frequency converter to regulate the conveying speed. The supported supports shown can also be used as support feet for standing use. Roller curve conveyor 90° Roll width: 600 mm Total width: 680 mm incl. support feet H = 635 mm +/- 50 mm adjustable Connection voltage: 400V Engine Conveying speed (v m/s): adjustable upwards and downwards with frequency converter More items - new and used - can be found in our shop! International shipping costs on request!

sheet width: 3000 mm plate thickness: 4 mm pre-bending: 3 mn number of rolls: 4 Walzen diameter of upper rolls: 200 mm roll diam. bottom roll: 180 mm speed: 6,0 m/min total power requirement: 5,5 kW weight of the machine ca.: 4,85 t dimensions of the machine ca.: 4,9 x 1,39 x 1,4 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 20 mm pre-bending: 16 mn number of rolls: 4 Walzen diameter of upper rolls: 350 mm roll diam. bottom roll: 260 mm speed: 1,5 - 5 m/min total power requirement: 23,5 kW weight of the machine ca.: 13,3 t dimensions of the machine ca.: 5,45 x 1,95 x 2,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Properties: Condition: fully functional, with traces of use Feet to be ordered separately Color: Blue Material: Steel Ideal for fast material transport Expertly dismantled and packed 5 segments Specifications: 2u7g7cji Dimensions of the roller conveyor Total length: 16175 mm Segment length: 3235 mm Total width: 525 mm Conveying width: 455 mm Roll diameter: 50 mm Axle distance: approx. 85mm (adjustable) Propulsion: Gravity Frame Height: 125 mm Width: 30 mm Stock: 16,175 meters Roller conveyor Due to the excellent workmanship of the roller conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to prepare your indiv ...

impact length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 73 kg length in width: 620 mm length in total: 2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.