roll in gas used for sale

Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container rotating device -Roller spacing: 215 to 1470 mm -Rollers: Ø 200 mm -Load capacity: about 2000 kg -Number: 1 piece available -Dimensions: 1720/500/H500 mm -Weight: 136 kg

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 1200 meters overall width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Colour: Green & Grey Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available from August 2023 1200 meters in stock Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are  ...

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

used rack ovens Miwe Rollin e + RI 1.0610-TXXL from year 2020, 2019 and 2017 immediately available in stock for sale. Two pieces are from 2020, one piece from 2019 and one from 2017. The stoves are equipped with oil burners. -Miwe Rollin e+ -Type: RI 1.0610-TXXL -Sheet size 58x98cm -Fuel: Fuel oil -with exhaust hood including fan -with ramp -Door hinge on the right -with Miwe TC control -400/230 V 3/N/PE

-Rotary oven Baking cabinet Miwe Rollin -for 60x80cm sheets -with exhaust hood -with gas burner / oil burner -Nominal consumption 2.6 kW -Nominal heat load. 85 kW -3N- PE- AC 400V 50Hz -with ramp -Year of construction: 2007 -External dimensions approx. 153x160cm and 282cm high

MAJA PART NUMBER : 515-0422 TRANSPORT SCRAPER ROLLER Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

- Manufacturer: A. Fritsch KG - Type: Rollfix - Belt width 61cm

Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...

Air cooler, evaporator, cold storage, refrigerated container, cold room -Number: 2x fans 0.58 kW 1200 watts -Weight: 16 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1- 2 inch -Weight: 6.5 kg

FRITSCH cone winding machine 250 T, used, technically tested, function tested, partially overhauled with new Teflonized adjustment roller/feed shaft

ID3299 MAN 16.170 year/Baujahr 1984 23,000 km (real!) ROLLAND Conic compost spreader (built 2009) on MAN 16.170, Truck has cross and longitudinal lock and PTO gearbox for roller drive Compost spreader ROLLAND Conic (built in 2009) on MAN 16.170, truck has cross and longitudinal lock and PTO drive for roller drive

Year of construction 2023 Anilox roller with 120 lines/cm suitable for Heidelberg XL 106 Anilox roller with 100 lines/cm Scoop volume 10 ccm hexagonal Angle 60° Delivery date: immediately Price on request. We deliver and install worldwide!

ROLL WASCH Slitting line for wastewater Sludge centrifuge Model No.: RFC-20 400 V

Roller Conveyor/Rollers 13.76 meters by BITO Manufacturer: BITO Condition: used Year of Make: 2013 Model: Gravity Overall length: approx. 13760 mm Total width: approx. 400 mm Conveyor width: approx. 370 mm Wheelbase: approx. 75 mm Roll diameter: approx. 60 mm Frame: approx. 80 mm high Material: Steel/Galvanized Facility consists of: 2 segments, approx. 3180 mm length 2 segments, approx. 2700 mm length 1 segment, approx. 2000 mm length Price per meter Internal Article Number: 2026051506 Conveyor technology – reliable and immediately ready for use - The conveyor technology offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with usual signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and packed safely for transport Pick-up address:  ...

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

We have MIWE roll-in stoves for sale Price 2 000euro

used rack oven Miwe Rollin RI 1.0608 TL for a rack trolley with exhaust hood and ramp for sale. -Rack oven Miwe Rollin -Model RI 1.0608 TL - for 60x80cm trays -with oil burner -Built in 2007 and 2009 -400/230V 3/N/PE -50 Hz -Door hinge on the right -with exhaust hood -with drive-on ramp - 2 pieces available in stock

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Curve/Conveyor Curve/Rollers 70 Degree Vanderlande with Drive Year of manufacture: 2023 Manufacturer: Vanderlande Model/ Type: Rollers, 70 degree curve Condition: used (as good as new) Total length outside: approx. 2040 mm Total length inside: approx. 1120 mm Total width: approx. 870 mm Conveyor width/roller width: approx. 740 mm Roller spacing/centre distance: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Steel frame Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.75 KW Stock: 12 pieces Price per piece The conveyor technology ran until dismantling. Submission of an offer only with a valid imprint, sale only to commercial customers. Internal Article Number: 2026071904 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high lo ...

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

Used Used Krones labeller Roll-Fed 12.000 bph: Year: 1995 Condition: As Is Used Krones labeller Roll-Fed 12.000 bph: Model: Contiroll Year: 1995 about Speed: 12.000 BPH Direction: Clockwise 15 heads Mechanical cam plate 1 station Type of station labeling: roll fed Safety protections Code: EA 665 More details: https://bottlingscout.com

Used Used labeller Sasib Roll-Fed 54.000 bph: Year: 1999 Condition: As Is EA 630 | LABELLER SASIB ROLL FED Year: 1999 Speed: 54.000 Bph Model: ROLLQUATTRO F45 ? 36T / SR / HH3 S1 E1 Direction: counterclockwise American type Number of heads: 36 Number of stations: 1 ROLLFED Bottle formats: 33 CL /45 CL/75 CL/90 CL/ 1L/120 CL Safety protections Code: EA 630 More details: https://bottlingscout.com

Used Used labeller P.E. Roll-fed PET: Year: 2007 Condition: As Is Used Labeller P.E. Roll Fed | PET Year: 2007 Speed: 30.000 BPH Direction: American (Parallel) Model: ROLLMATIC N Number of heads: 24 Heads Nr.1 Roll Fed Station Bottle formats: 0.5 LT | 1.0 LT | 1.5 LT Safety protections Code: EA 581 More details: https://bottlingscout.com

Used Used Krones 18T 1S Roll Feed Labeller: Year: 2020 Condition: As Is Model: Contiroll - Checkmat Year: 2020 Speed: 30.000 bph 0.5 lt format Type: Rotary labelling machine Direction: Counter-clockwise Plates: 18 carousel plates with belt drive 1 roll-feed station for wrap-around OPP labels Inspection: Carousel label inspection via Krones Checkmat Safety protection Code: EA 708 More details: https://bottlingscout.com

Roller press, Make Swift, Model roller press 61, Year 1980´s ?, Width 610 mm, Available Direct, Width: 610 mm

Roller press, Make Swift, Model Roller press 76, Year 1980´s ?, Width 760 mm, Available Direct, Width: 760 mm

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.