roll in gas used for sale

Key data: 1600 KW, 400 V

MTU gas engine 2010 Running hours 50K from new All auxiliaries with the engine Cylinder Heads replaced at 44k in2022 Liners & piston replaced at 32k in 2021 Service report

Steam boiler Loos with Weißhaupt gas burner Type: U-ND 500 capacity: 500 kg steam/h Max. operating overpressure: 1 bar Test overpressure: 2 bar Water capacity full approx.: 770 l year of construction: 2003/2004 CE-marking: 0036 incl. hot water tank with condensate pump

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

Key data: 1451 KW, 2080 kVA, 400 V

AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: JENBACHER TYPE: JMS420 GS NL POWER RATING: 1451 KW FUEL: NATURAL GAS YEAR:2007 HOURS: 49.000 ALTERNATOR: AVK - STAMFORD ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET

Key data: 1600 KW, 1986 kVA, 400 V

AVAILABLE FOR SALE! USED GAS GENEARATORS SET. MAKE: CATERPILLAR TYPE: G3516C POWER RATING: 1600 KW FUEL: NATURAL GAS YEAR:2010 HOURS: 70.000 OVERHAULED BY 50.000 HOURS ALTERNATOR: CAT SR4B ,400V, 50HZ, 1500 RPM EXCELLENT CONDITION. SCOPE OF DELIVERY: ENGINE+ALTERNATOR CONTROL PANEL GAS STREET

The main components in this installation is the natural gas engine: - Jenbacher engine 620 - Year 2021 - Running hours: 2,981 hours. - Fuel: Natural gas The full list of the equipment included in the scope is the next: MAIN PARTS – ENGINE Jenbacher 620 F 3,358 kWe YEAR 2021 – 2,981 running hours – GENERATOR AVK 6,3KV 50HZ – WASTE HEAT STEAM BOILER: ERENSAN WHB-ESB 160 1600 KG/H – ABSORTION CHILLER: BROAD AIR CONDITIONING 1028 KW 7-12 ºC 177 m3/h – MAIN TRAFO: ABB 4,2MVA 6,3/33kV AUXILIARIES – HT and LT Exchangers – Chiller Unit and its Pumps/Motors – Cooling Tower – HT Radiator – LT Radiator – Chimney – Economizer – Dirty Oil Tank – Clean Oil Tank – Star Point Resistance – Fresh Air Fans – Monorail Crane – All pumps, fittings, pipes, etc. auxiliary equipment in the Engine / Boiler / Chiller system – Generator P ...

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2001, Scope of delivery: base frame and generator, as shown. Engine turns, intercooler, turbocharger, starter, ignition coils, spark plugs are missing. 1 available 1,365 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2203129 Power [KW]: 1.400 Year of construction: 2001 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00366141 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2001 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2002, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2203411 Power [KW]: 1.400 Year of construction: 2002 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00205114 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2002 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator (defective), as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205035 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00366141 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2004, Scope of delivery: Base frame and generator, as shown with missing parts – bushings defective. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205063 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0166189/02 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2004, Scope of delivery: as shown, generator defective with base frame. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205165 Power [KW]: 1.400 Year of construction: 2004 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 0132701/03 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2004 Weight [kg]: 3.700

Key data: 1400 KW, 1800 kVA, 400 V

Gas generator set from 2005, Scope of delivery: Base frame and generator, as shown with missing parts. 1 available 1,800 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2205551 Power [KW]: 1.400 Year of construction: 2005 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00145797 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2005 Weight [kg]: 3.700

Key data: 1344 KW, 1680 kVA, 400 V

Used CHP power plant, install in French hospital in Marseille Gas generator MWM DEUTZ Model TBG620V16K Power 1680 kVA year of manufacture 1996 Running hours 30.000 Natural gas supply with control panel Transformers 1600 kva Gas train Table cooler Heat exchanger Price 30.000 €

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generators from 1997 with 54,430 operating hours, complete with control and heat exchangers. 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4099 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 Exhaust gas flow [kg/s]: 5.7 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial number:– Power [kVA]: 3294 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1997

Key data: 3240 KW, 3294 kVA, 10500 V

Electricity and heat generator from 1998 with 61,000 operating hours, BSService at 50,000, then another 10,000 operating hours, complete (still installed). 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4008 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial Number: 106824 Power [kVA]: 3300 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1998 Weight [kg]: 10.970

Caterpillar G3412 - Overhauled - 419 kW - 6ZM

Key data: 260 KW, 400 V

GUASCOR FGLD180 Natural Gas Generator Set for sale. Make and Model: Guascor FGLD180 Operating hours: 31,284 Year of manufacture: 2010 Rated power: 260 kW V: 400 Hz: 50 Fuel type: Natural Gas Components: Engine and generator set, control panel and control unit, power panel, thermal recovery system consisting of a plate heat exchanger and thermal module for recovering exhaust fumes, containerized. The company decided to stop the plant because they were no longer in need of it.

Caterpillar G3516C - Unused - 1555 kW - G7E

Key data: 1548 KW, 1935 kVA, 11 V

Jenbacher J420 GS-B25 Rated power: 1500 kw Year of manufacture: 2015 Frequency: 50hz Rated voltage: 10500v Performance class: G2 Hours aprox: 55.000 Diane XT4 control panel Stamford generator: 1548kw / 1935 kva 50hertz rpm 1500 Voltage 10.500 volt Scope: Engine Generator stamford Diane XT-4 Control panel Engine panel Gasline Battery loading place: Netherlands

Recon Part Number: RMG 985B-200/100 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Key data: 727 , 400

MWM TCG2016 V16C Biogas Generator Set. Make and model: MWM TCG2016 V16C Capacity: 727 kW Fuel: Biogas Year: 2008 / new engine block 2019 Hours: 10,000 HZ: 50 V: 400 Scope of supply: Engine, Alternator (Marelli - 2017), Cooling Unit (Hitema), Control Panel (TEM EVO), Gas Line, Transformer, Container, Radiator. In 2019, New Engine, Turbo, Intercooler, Electrical equipment (sensors etc), were installed. Alternator is from 2017. Price: Please Apply

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Key data: 2700 , 11000

Jenbacher 620 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 14,000 Capacity: 2.7 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. This generator has an issue with the coupling. Dismantling is the responsibility of the buyer.

Complete 10MW Jenbacher 6 Series natural gas power plant. These engines have been maintained by the official Jenbacher distributor. Capacity: 10MW Fuel: Natural Gas Year: 2001 Hours: 12,000 - 14,000 V: 11,000 HZ: 50 Scope of supply: 3 x Jenbacher J620GSE01 11Kv 12,100 - 14,100hrs 1 x Jenbacher J616GSE01 11Kv 14,000 4 x external cooling tables 4 x upgraded Comap control panels 4 x engine cell ventilation including louvres and filters 4 x 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board (one per gen plus main) 11/33 15MVA export transformer 11/414 import transformer Waste and fresh oil tanks Plus all other controls and cabling.

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Caterpillar G3516 - Used - 1000 kW - 4EK

Key data: 999 , 400

4 x MTU 8V4000 GS MIP + MMC for sale. Series 4000 four-stroke turbocharged gas engine with mixture cooling - compact, high performance, reliable, maintenance-friendly and extremely economical. Lean mixture technology, state-of-the-art electronic ignition system with individual ignition timing and automatic ignition power control, anti-knock control as well as highly responsive mixture and load control ensure economical and safe genset operation with optimum use of the energy input. Island operation capability. Make and Model: MTU 8V4000 GS MIP Capacity: 999kW Hours: 0 Year: 2023 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator (Stamford), Base frame, MIP (MTU Interface Panel), MMC (MTU Module Control - The MMC contains the cogeneration control system including mains monitoring, visualization and user interface). Price: €285,000 each Plea ...

Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

For sale is an AvK DIG 140 i/4 generator, which bears the serial number 84 27519 A101. This model was originally paired with a Jenbacher 620 engine with the design number B227. The generator is characterized by its high power of 3400 kVA, which is generated at an output voltage of 10,000 V and a frequency of 50 Hz. This model was manufactured in 2005 and has clocked up 75,000 hours since then. An important aspect to keep in mind is that this generator has been completely overhauled, including Unitrol. This ensures that it is still in optimal condition despite its intensive use. The price of this generator is 29,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us

For sale is a Stamford HVSI 804 R2 generator with serial number 0856607/01. This generator was coupled to a Jenbacher 420 engine with the design number H719. The generator delivers an output of 2167 kVA at an output voltage of 10,500 V. It was manufactured in 2010 and has since clocked up 85,200 hours of operation. An important aspect to keep in mind is the careful maintenance history of this generator. At 60,000 operating hours, maintenance was carried out by Baumüller and at 70,000 operating hours, a comprehensive overhaul was carried out. The price of this powerful and well-maintained generator is 18,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

LORCH HR 918 REMOTE CONTROL LORCH HR 918 remote control As new. For details see Lorch With conversion kit to CAN bus (if this is not already on your machine) Price: €500 ex VAT

Jenbacher JGS416 GS-N.L Complete Containerised Plant with Steam Boiler Hours: 30,604 Year: 2011 Capacity: 1,189 KW Fuel: Natural Gas Voltage: 400 Volts HZ: 50 Top end service was done at 27,000 hours by Jenbacher. Inspection Notes: Engine seen running – good condition. Scope of supply: complete Containerised Plant with Steam Boiler comprising of Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3), Gas Line, Radiator, Synchronisation panel, etc. Price €250,000

CUMMINS 2,000 kW Natural Gas Generator Set Condition: Low Hour 990 Hours Since New Engine: Brand: Cummins Model: QSV91-G3 Serial#: 66302908 Date of Manufacture: 10/02/2013 Fuel Type: Natural Gas Governor: Electronic Air Cleaner: Dry Type Flywheel Hsg. Size: N/A Cooling: Radiator Cooled Alternator: None Starter: 24 Volt Electric Starter EPA Tier Rating: No Tier Rating Package: Brand: Cummins Model: C2000 N6C Serial#: K13K591216 Control Panel: with Autostart and Safety Shutdowns Breaker: No 0 Amp Enclosure: None Fuel tank: Battery Charger: No Battery(ies): No Block Heater: Yes Muffler(s): No Trailer/Chassis: No Trailer Title Available: No Notes: Rated Continuous Prime Power Generator: Brand: Newage Model: MVS1804R2 Serial#: P13J026650 kW: 2,000 kVA: 2,500.00 Rating: Continuous Volts: 2400/4160 Amps: 347 Phase: Three Phase Power Factor: 0.8 Temp. Rise: 125° Frame Size: 51 # ...

Key data: 588 V, 400

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 5,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine,Alternator, Frame, Control panel, Switch panels, Dual gas lines, Radiators and other accessories. Price: Please Apply Various Original Jenbacher conta ...

NATURAL GAS THERMAL POWER PLANT CONSISTING OF 3 CUMMINS 1750GQPB GENERATOR SETS (QSV91-G ENGINE) Fully equipped natural gas thermal power plant. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251030), comprising Cummins QSV91-G Engine (66300362) and PCS; with 7695 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251410), comprising Cummins QSV91-G Engine (66300363) and PCS; with 8746 operating hours. 01 CUMMINS manufactured generator set, Gas, model 1750GQPB (E02K251420), comprising Cummins QSV91-G Engine (66300359) and PCS; with 8061 operating hours. Electrical panels and controls for the respective equipment; DMC 300 (paralleling equipment); QTA (Automatic Transfer Switch); Noise attenuators; 02 Water towers, pumps, and associated cooling system pipes; 01 small transformer, switches, and cable trays; Maintenance switches and ...

Key data: 170

Schnell CHP plant Bio with Scania Engine Brand: Scania Model: DC9 Dual Fuel Power: 170kw Hours: Engine 40000h, Alternator 20000h, whole plant 99000h Year: Engine 2018, Alternator 2020, whole plant 2010 Fuel: Biogas Scope of supply: Complete CHP NOT containerised with Engine, Baseframe, Alternator, Comap Control System, Gas Exhaust Heat Exchanger, Radiator, Gas line, Electrical Control Cabinet, Oil filtration block, Activated Carbon Filter, Gas Booster. Maintenance information: The engine block requires liner change (2 out of 5 are less than 6 months old, the other 3 are 5 years old). Price: 50,000€

Capacity 1500 kw Gas type : Biogas With container Engines not used

Offer 22437 Specifications: - Welding current max. 450 A / 36 V 60% ED - 350 A / 32 V 100% ED - Welding current adjustable in 2x 18 switch levels 60 - 450 A - 2 bar + 4 bar – regulation, points, interval - 2 roll wire feeders, infinitely adjustable in separate - Wire feeder case CLOSS , CK 68 C - Intermediate package machine – wire feed approx. 6 m - Hose package water-cooled approx. 4 m - Ground cable -Reducer - Connection 400 V / 19 KVA - Space requirement approx. W 490 x H 1200 x D 1100 mm - Weight approx. 180 kg

For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ

We are also happy to send you videos of how it works. Shipping possible by arrangement for an extra charge. If you have any questions, just get in touch. PLEASE NOTE: This offer is non-binding and subject to availability. The indicated price is per piece, net, plus 19% VAT. free loading from DE-83395 Freilassing.

CAT G3516B YOM: 2006 Natural gas Power: 1085Kw Always maintenanced under CATERPILLIAR contract full service. Scope of supply: Complete package Genset Control panels Gas train Silincer Mufller Coolers Oil system

UK Power Generators Ltd is selling the Caterpillar G3516B with 1.1 MW and 2004 is the year of manufactured. This is a containerized package, with the following specification details: Machine Model G3516B Year of Manufacture 2004 Power Output 1100 kw Fuel Gas Condition Used RPM 1500 RPM Frequency 50 Hz Voltage 400 V Location United Kingdom Containerized Complete Containerized Package If you are looking for a great reliable source of energy to enhance your business, production and lighting people homes with affordability. Choose us, for your energy needs to be sorted. The container has very high specs, and the transformer is included in the containerized package. The transformer is Step up 400-11000 V. Contact us with your company details and further information at: Infoukpowergeneratorsltd

UK POWER GENERATORS is offering Box Package powered by Gas Fuel Manufacturer: MWM Duetz Model: TBG 620 V12 K Sr No: 620 12 000 295 Engine: Rated Output Power: 1050 kw Speed: 1500 RPM Frequency: 50 Hz Voltage: 400 V Stamford Alternator: Rated Output: 1330 Kva Speed: 1500 RPM Voltage: 400/231 V The genset has only done 21,824 running hours, which is very low. It has only been running in winters for CHP operations. It has been maintained throughout its life according to manufacturer approved service provider, as per the manufacturer recommendations. Following is the scope of supply: Everything inside the container as per the pictures attached. Engine and alternator mounted on skid Engine and breaker panel. Table cooler and radiator Exhaust Silencer In order to get more detailed information please emai ...

UK Power Generators Ltd, have pleasure to present gas unit by Caterpillar G3516A for sale. Attached are the pictures for the genset, containerised package Machine Model Caterpillar G3516A Year of Manufacture 2000 Rated Output Power 1030 kw Fuel Gas Condition Used Speed 1500 RPM Frequency 50Hz Voltage 400 volts Location United Kingdom The containerised package is a complete plug and play unit. All life maintained by manufacturer approved service provider and available on request. Fully major overhauled been completed just now. Great For site visit, pricing and booking information, feel free to contact us at: Infoukpowergeneratorsltd ~ UK Power Generators Ltd

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...