roll grinding machine used for sale

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

ORT 3RP10 PLC thread rolling machine, inverter (RPM), scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die., Number of rollers: 3

ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools

Key data: 63 t, 250 mm, 300 mm

Thread and Profile Rolling Machine Machine Type Cylindrical 2-Roll Thread Rolling Machine Max. Rolling Capacity (Force) 630 kN (63 tons) Workpiece Diameter (Min. / Max.) 25 mm / 200 – 250 mm Max. Diameter of Tools (Dies) 300 mm Spindle Diameter 110 mm Spindle Speed Range 10 – 100 rpm Spindle Drive Motor Power 22 kW Total Power Requirement (Connected Load) 26.5 kW Operating Rated Current 54 A Electrical Power Supply 380 V / 50 Hz (Three-phase current) Control / Auxiliary Voltage 110 V / 24 V Required Floor Space (Dimensions) 3072 × 2140 mm Total Machine Weight approx. 7500 – 8000 kg (7.5 – 8 tons) Design Features Twin-roller system: Works with a pair of cylindrical profile rollers. Materials: Suitable for working with high-strength steels, rods, and pipes. Application: Used in heavy engineering to create fasteners, shafts, and other components with i ...

Brevetti E. Gasparin 50COR 2, Baujahr 1999. Industrielle Flow-Pack-Verpackungsmaschine für den Einsatz mit Folie. Ausgestattet mit Temperatur- und Geschwindigkeitsregelung, manuellem und automatischem Modus sowie einer Lichtschranke. Technische Daten: 380 V, 50 Hz, 4 kW, Gewicht 735 kg.

diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 10-24 mm Forging power 7-20 to thread length plunge method 195 mm daylight 160 mm max. pitch 3,5 mm roller bore 80 mm roller width 235 mm roller length 195 mm

diameter range 1,8 - 4,2 mm shaft length under head 32 - 105 mm thread length 27 - 75 mm output pieces/min 2500

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, Overhaul 2026, 2026 Electronic overhaul and electronic retrofit with Siemens PLC (2026) The machine is visible under power in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA

diameter range 110 mm max. outside dia. of round pieces 110 mm kind of heating 335 KW

diameter range 8-16 mm shaft length under head 12-160 mm max. thread length 100 mm output pieces/min 115

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

diameter range 4-12 mm shaft length under head 150 mm max. thread length 130 mm output pieces/min 85-220

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

diameter range 6-12 mm shaft length under head 8-75 mm max. thread length 75 mm output pieces/min 1000

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

vibratory feeder diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 60 mm output - pieces/min 320

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

with washer assembly diameter range 10 mm shaft length under head 100 mm max. thread length 65 mm output pieces/min 180

vibratory feeder diameter range 3-8 mm shaft length under head 150 mm max. thread length 80 mm output pieces/min 400

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 58 mm output - pieces/min 250-480

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

with washer assembly diameter range 6 mm shaft length under head 80 mm max. thread length 62 mm output - pieces/min 450

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

sheet width: 2050 mm plate thickness: 4 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible.

Code: 0429 Brand: AGLA Model: 1200 Automatic 1-roll polishing machine for polishing polyester and polyurethane paints, wood, metals, marble and similar materials Technical specifications: Sturdy construction Work surface dimensions: 3600 x 1260 mm Working width 1200 mm Working height 300 mm Brush diameter 350 mm Motor 15 Hp Automatic work surface lifting 2 workpiece clamps Overall dimensions mm 3600 x 2180 x 1650 h Weight kg 1700

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details.

: 1050 mm : 5.5 mm : 5.0 mm roll diameter: 130 / 195 mm : 2.2 kW : 1050 kg : 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 420 mm grinding length: 2500 mm swing diameter: 870 mm centre distance: 2700 mm workpiece turning speeds: 1-164 U/min total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 5 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3400 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNIFY UM-20 ist eine Gewinderollmaschine für Präzisionsarbeiten, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Gewindedurchm. 4–20 mm, Steigung 1–3 mm, Rollen Ø max 118 mm, Breite 50 mm, Wellenabstand 100–135 mm, Wellendurchm. 40 mm. Technisch: bis 80 t/min, 50 Hz 3x380 V, 2 kW Motor, Gewicht ~750 kg, L1170×B740×H1050 mm. Zubehör: Satz Gewinderollen, Lampe, Satz Bedienungsschlüssel. Erzielt enge Toleranzen; geeignet für Automotive, Uhren, Werkzeugbau, Luftfahrt, Medtech. Technische Daten ohne Gewähr