137,153 used machines on RESALE, but how to find them? Machine Search
Copy lathe Manufacturer: Hempel Model: CKS-12 For the production of moulded turned parts in small series Without the use of moulded steels Scanning via sheet metal template or wooden model Turning length max.: 1200mm Rotary diameter max.: 250 mm Spindle motor: 5.5 KW Hydraulic motor: 2.2 KW
Type: ST-700 Sealing length: 4 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day
Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper
Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible.
A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available
Hohner Economy 25/40 wire stitching machine; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with the clamp folded down, 40mm with the clamp not folded down; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.
Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery
JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE
Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS
Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts
HEBÖ SSB-3 scroll bending machine was manufactured in 2015 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ SSB-3 is a professional bending machine for the production of decorative elements used in artistic blacksmithing. The machine is designed to bend steel rods and flat bars, enabling the creation of spirals, arches and other decorative elements. Machining is performed by means of interchangeable work heads, which gradually shape the material, ensuring high accuracy and repeatability of the finished parts. Continuous speed adjustment within the range of 1 to 50 rpm enables precise adjustment of operating parameters to the type of workpiece being machined. The machine also features a large work table, an integrated tool cabinet ...
HEBÖ STM-5VDZ wrought iron machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which a single workpieces were produced. The HEBÖ STM-5VDZ is an excellent choice for artistic blacksmithing workshops. It enables the efficient production of decorative elements, which are used, amongst others, in fences, balustrades and metal furniture. The standard HEBÖ STM5 unit is designed for twisting bars with a cross-section of 35×35 mm and a maximum length of 1250 mm. The continuous speed adjustment enables the machine’s operation to be precisely adjusted to the type of part being produced, whilst the 8 kW drive ensures stable operation even during the most intensive use. Thanks to additional attachments, it is possible to perform many different operations a ...
GEKA BENDICROP 50 ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.L.U. The machine, designed for the comprehensive machining of steel parts, enables a wide range of operations to be performed in one place. This solution significantly improves the production process and reduces the need for additional machines. The GEKA BENDICROP 50 is equipped with 5 work stations for punching holes, bending flat bars, and shearing flat bars, angle bars and steel bars. Each station features high-quality, quick-change tools, which allow the machine to be adapted to current production requirements. The design, based on a rigid, durable frame, ensures high operational stability even during intensive use. As a result, the GEKA BENDICROP ironworker machine is an excellent choice for production plants and locksmith workshops. The total weight of the machine is approximately 1000 kg. Te ...
Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment
FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The ...
This 5-axis LICON LiFLEX II 766 i3 DT B22 was manufactured in 2016. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 96 tools. The machine is equipped with advanced i³ technology, allowing independent control of the X, Y, and Z axes for both spindles. If you are looking to get high-quality machining capabilities, consider the LICON LiFLEX II 766 i3 DT B22 horizontal turning machine we have for sale. Contact us for further details.
This 3-axis HARTFORD Infinity HSA-2215AD gantry milling machine was manufactured in 2007. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 780 mm. The machine includes a robust table size of 2,200 x 1,400 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the HARTFORD Infinity HSA-2215AD machine we have for sale. Contact us for further details.
Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer
1 SANTONI seamless circular knitting machine type SM8-EVO4, cylinder diameter 16", 1216 needles, gauge 24, year 2006, creel for 24 bobbins. This machine was bought for development and has not more than 300 real working hours
A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.
Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014
1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter, ...
GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!
1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected
Capacity: 900 to 3.000 bottles/hour Wirehood: Four-wire closures Bottle height: approx. 235 - 360 mm Magazine capacity: 1.600 corks
This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.
CNC Slant-Bed Turning Center manufactured in 2005. This CMZ TBI-520 features a maximum swing over bed of 520 mm and a maximum turning length of approximately 1,100 mm. It is equipped with a 12-station turret and a hydraulic 3-jaw chuck with a diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the CMZ TBI-520 machine we have for sale. Contact us for further details.
Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes
This 3-axis Bystronic Bysprint 3015 CO₂ laser cutting machine was manufactured in 2006. It features a working area of 3,000 × 1,500 mm and includes an automatic table changer and two cutting heads. The machine has a maximum cutting capacity of 12 mm for stainless steel and 20 mm for mild steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic Bysprint 3015 machine we have for sale. Contact us for further details.
Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.
1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7
TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.
1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch
Migatronic PI 200 DC HP TIG/TIG Welding Machine The PI 200 DC HP is an easy-to-use 200 TIG inverter for welding steel and stainless steel and others, materials that can be welded with direct current (DC), with pulse function. MMA welding is also possible with the device. TIG-A-Tack™ - Synergy Plus HF (ignition with HF) LIFTIG® (ignition without HF) Current range 5-200 A Duty cycle 100 %/20 °C (TIG) 170 A | 160 A Duty cycle 60 %/20 °C (TIG) 200 A. Mains voltage 230 V Synergy Plus: Synergy Plus is a special pulse function for TIG DC welding, in which the machine dynamically controls all higher-level pulse parameters. TIG-A-Tack®: With the TIG-A-Tack® function, you can create extremely small and precise tack welds on stainless steel without forming gas. They significantly reduce the risk of weakening the metal's anti-corrosion properties or its shape and strength. ...
SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!
Sales due to lack of space LSM500 Turnkey complete system built in 2021 - PC+touch screen - Including labeling software - Compact free-standing booth laser protection class 1 - Viewing window with laser protective glass - Manual access door with safety switch - Light indicators "Laser in operation" - Key switch to activate the laser - Electric height adjustment (tap mode) - Pilot laser - High life expectancy - High beam quality - Gray value labeling - Barcode scanner can be connected - With connector for extraction - Clamping surface with T-slot plate - USB port Technical data: - Labeling field approx. 100 x 100 mm - Laser power pulsed 20 W - Wavelength 1060~1085 nm - Polarization Random - Single pulse energy 20kHz 1.0 mJ 20kHz - Beam quality
Reference Num.: 4462 Brand: Ryobi Type: RMGT 970PF-8 Construction year: 2025 Impressions: 8 mio Available: directly Status: In production Location: Europa Printing units: 8
Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg
round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.
ECKERT AGAT SPEED 6000x2000 oxy-fuel cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for the precision oxy-fuel cutting of sheet metal, enabling the production of high-precision and repeatable components. Machining is performed by a HARRIS oxy-fuel torch based on pre-programmed cutting programmes. A support with a capacitive distance sensor maintains the correct torch height above the workpiece, ensuring a stable process. The 6000 x 2000 mm work space enables the machining of larger workpieces, whilst the machine’s open design ensures convenient access to the work area from all sides. The ECKERT AGAT SPEED is operated via the intuitive ECS 872 CNC controller with a touchscreen. The machine is also equipped with CAD/CAM software, which streamlines project preparation and the management of the sheet metal cutting process. Technical specif ...
Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:
A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.
The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.
Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
maximum number of results exceeded
please refine your search
