136,468 used machines on RESALE, but how to find them? Machine Search
Machine reamers, reamer, reaming tool, locating knife cutting set -Recordings: MK1/MK2/MK3 -partially with reversible inserts -various sizes as seen in photos -Sale: only complete set -Weight: 40 kg
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E -Power: 2.4 kW -Plate diameter: 790 mm -Transport dimensions: 1190/1000 / H1410 mm -Weight: 87 kg
de-de-de-grinding machine Cambio 66 with mechanization Diameter 660mm with centering table, block pull with drop. dismantled
ERMAKSAN LASERMAK 6000 6X2 laser cutter was produced in 2014. Technical parameters: – laser source: 6000 W CO2-laser GE Fanuc C6000i-Model C – RF-excitation: 2 MHz – power stability: ± 2% (power monitor) – laser wave length: 10.6 μM – beam mode: Fanuc Low Order Mode – laser shutter: mechanical safety shutter – laser gas composition: CO2 / He / N2 – gas consumption by laser: 20 l / h – cooling water flow rate: 250 l / min – maximum cutting capacity: mild steel 25 mm (during tests the maximum achieved: 30 mm), stainless steel 15 mm, aluminum 12 mm - machine activation time: 22899 h - working time: 10122 h - cutting time: 8429 h – total energy requirement: 100-120 kW – cutting head focal length: 5 -7” -10 inch – maximum worksheet size: 6150 x 2000 mm – maximum burden capacity: 4000 kg – machine axes: 5 axes [X, Y, Z, U (X2), V] – axis ...
Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel -Manufacturer: Noggerath, hand-held concrete smoothing machine type G 900 E -Power: 1.5 / 1.8 kW 1400/2850 rpm -Plate diameter: 835 mm -Transport dimensions: 1200/1000 / H1260 mm -Weight: 81 kg
Weibert NX 310 PRO-CE 5-speed station wagon Motor 3x 3,7 KW, 400V, 50Hz TERSA -Knife planing width 310mm Numerical display of the planing height Dressing tables swivel to the machine side Saw blade diameter 315 mm Cutting height 107mm to 90° Cutting height70mm to 45° Milling manduck 2900-4000 6000-7500 rpm D=30mm Sliding table 2100 x 320mm with extender Miter stop Eccentric tensioner Table extension with swing-off device for feed Weight 585kg G&RO-NX310-PRO
Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2015. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: right. Used in a 60.000 cph line (+30% overspeed). Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg
Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm
Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg
Handtmann VF 612 Filling - Portioning - Turning Off Year of construction 2009 Price on request
Handtmann VF 628 Filling - Portioning - Turning Off Year of construction 2009 incl. Wolf GD93-5
Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request
with feeding Filling - Portioning - Turning Off MC Control Price on request
Slicer Bizerba Year of construction 2000 Price on request
Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg
Milling machine, universal milling machine, tool milling machine, two-spindle milling machine, milling machine -Milling machine: Two-spindle milling machine for small parts -Dimensions: see photos -Drive: 0.37 kW each -Coolant device -Dimensions: 1000/850/H1360 mm -Weight: 352 kg
A used dough cradle W&P Parta U with stainless steel cladding is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP Parta U - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output: 925 to 1050 pieces - the dough divider is in baker's condition
gebr. Fork kneader AO 170, for 80 kg flour, stainless steel fork, stainless steel boiler, overhauled
Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
Automatic encrustation- confectionery and confectionery machine new Double filling machine with cutting rod function Standard mold size and weight: Popcorn Cookie 25g Diameter 45mm Rotating twist 50 g length 90mm Cyclone volume 30 g diameter 55mm Mochi mold 30 g directly 35mm Two-color strip cookie 40g length 60mm Moon cake 60 g directly 50mm Two-color cookie 30g diameter 40mm Encapsulated cookie 30g diameter 40mm Cwjbewkq Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 265 x 70 mm -Clamping depth: 285 mm -Dimensions: 620/300/H210 mm -Weight: 81 kg
Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.
Automatic horizontal packaging machines Model:NT-250 Voltage:AC 220/50 Film width:Max.250mm Power:2.4KW Bag length:65~190mm or 120~280mm Bag width:30~110mm Product height:Max.40mm Film diameter:Max.320mm Pack speed:60~120bags/min Machine size:37706701450mm Weight:480kg
Washing bath with conveyor, bath conveyor, swimming / sinking system, swimming / sink container with discharge belt, belt washer, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Bathroom approx. 3000 x 1000 x 1200 mm stainless steel Discharge belt with worm gear motor with control SEW / BONFIGNIOLIE DFT90L4/MM1S/BW1 MOVIMOT MM15C-503-00 1.5 kW 380 V Transverse band with gear motor MINOR ENGINE Y3-71B4B14F1 0.37 kW 380 V Total dimensions: approx. 4300 x 2300 x 2500 mm The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
Milling machine +6 mesh Mesh size 0.2/0.6/1.0/2.0/4.0/5.0mm Germany Wall Engine Updrive M1S-632-2 B3 Single-phase AC motor with start-up and operating capacitor, 0.25 kW, 2800 min-1, 230 V 1~, 50 Hz, IP 55, Iso F, S1, 40° C, Design B3 (foot 80 x 100 mm) Hpg28ilv Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856
Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg
Automatic dates/olive gutting machine Motor power: 1:5 kw operation mode: Automatic Weight: 350 kg Size : 100 x 1000 x 1000 Output : 150 kg/ Hour Power supply : 380 v Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856
Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Abutment: for milling machines -Dovetail: 220 to 165 mm -Bore: Ø 85 mm -Dimensions: tech. Drawing with the photos -Dimensions: 400/145/H290 mm -Weight: 13.5 kg
Automatic vegetable cutting machine Material: Stainless steel Dimensions: 13006001100mm Net weight: 100kg Voltage: 220V/380V Frequency: 50Hz Capacity: 200-700kg/h Diameter: 250 mm Power: 1500w Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856
Planing comb to Maag gear planing machine
TIG welding machine -Nimak electrode unit -Dalex converter -Hose package -ground cable
Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg
Automatic vegetable chopping machine Voltage: 220V Power: 1500w Weight: 10kg Dimension(LWH): 304369c Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Tecna, Spot welding machine: Type 4161 -Rated power: 31 kVA -Operation: via foot pedal -Dimensions: 780/250/H1500 mm -Weight: approx. 130 kg
machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg
Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg
Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.
Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.
Machine vise, heavy duty vise, drill press vise -Handover: in the current condition as seen -Base plate: See photos for damage -Machine vice: rotatable, clamping jaws 160 x 40 mm -Clamping depth: 185 mm -Dimensions: 445/225/H145 mm -Weight: 33 kg
Vacuum dough divider, German Technik Capacity: 1.800-2.400 pcs/h. Dimensions: 1370/1780x650x1600mm Weight: 420kg Electrical power: 1.75kW
Screw capping Zalkin with one closing head for aluminum screw cap running direction: right - left capacity: approx. 2,500 fl./h with sorting unit with safety housing
maximum number of results exceeded
please refine your search
