roll grinder used for sale

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: without drive -Roll width: 1150 mm -Rollers: Ø 82 mm -Roller spacing: variably adjustable -Dimensions: 2300/1350/H200 mm -Weight: 231 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Manufacturer: Bernardo, roller stand for hacksaw, band saw, cold circular saw -Roll height: 570 to 970 mm -Roll: Ø 52 x 355 mm -Dimensions: 500/420/H570 mm -Weight: 14 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with tiltable middle rail and end stop -Total length: 2000 mm -Roll width: 1000 mm -Rollers: Ø 80 mm -Roll spacing: 100 mm -Transport dimensions: 2390/800/H1580 mm -Total weight: 140 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll height: 445 to 565 mm -Roll: Ø 55 x 270 mm -Dimensions: 370/315/H445 mm -Weight: 22 kg

Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand -Roller stand: Roller stand for hacksaw, band saw, cold circular saw -Roll: Ø 65 x 240 mm -Dimensions: 325/65/H520 mm -Weight: 8.7 kg

roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block -Roller conveyor: non-driven, length 1.65 m on solid base frame, height adjustable -Roll width: 500 mm -Roll diameter: 80 mm -Roller spacing: 230 mm -Transport dimensions: 1480/720/H1020 mm -Weight: 134 kg

GAS TURBINE : 16 MW ROLLS- ROYCE-AVON 1534-102L Manufacturer Rolls Royce Avon 154-102L Year of manufacture 1978 Over hauled 2008 Operating Hours : 2800 Base load 10 MW Peak load 16 MW Fuel Condition Dual Fuel (Diesel and Natural Gas) Overhauled and Upgraded in 2008 Running hours 2580 hours since overhauled in 2008 GENERATOR Manufacturer Voltage GEC TURBINE GENERATOR LTD. 13.8Kv at 60 hz, 11.5 kV at 50 hz Phase Frequency 3 60 hz at 1800 rpm or 50hz at 1500 rpm Coolant Air cooled GEAR BOX Manufacturer Type GEC Marine and Industrial Gear Ltd. HSG28WH Frequency Speed ratio Single reduction type 6500/1800 TRAILER ENCLOSURE The Unit is packaged on heavy duty road design purpose trailer and can be setup quickly. It’s with weatherproof acoustic enclosure and enclosure is completely assembled and mounted over the trailer ...

Roller conveyor, conveyor belt, roller track, roller aisle -Roller conveyor: 2-part 3.24 m / 3.36 m / height adjustable -Roller width: 140 mm -Rollers: Ø 50 mm -Roller spacing: 140 mm -Price/Fee: complete -Dimensions: 3240/350/H1090 mm / 3365/350/H1090 mm -Total weight: 160 kg

Roller Conveyor / Conveyor / Roller - Gravity Schunk 16.7 meters Year of Make: 2013 Manufacturer: Schunk Model/ Type: Gravity Condition: used Total length: approx. 16700mm Total width: approx. 340 mm Roller/conveyor width: approx. 290 mm Roller diameter: approx. 40 mm Roller/center distance: approx. 50 mm Roller material: made of plastic Facility consists of: 3 x segments: approx. 4400 mm length 1 x segment: approx. 3500 mm length Frame: approx. 60 mm high, 20 mm wide Material: steel, galvanized Feet to be ordered separately, height adjustable Stock; 16.7 meters Price per meter The conveyor technology ran until dismantling. Internal Article Number: 2026071901 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are you ...

Roller conveyor, conveyor belt, roller track, saw roller conveyor -Roller conveyor: non-powered, length 3.0 m on a solid, height-adjustable base frame -Roller width: 200 mm -Roller diameter: 50 mm -Roller spacing: 140 mm -Transport dimensions: 3000/310/H890 mm -Weight: 44 kg

Brand new, never used. Belt size (mm): 600 x 1300

Eight segments available

SPECIFICATIONS: Machining width: max. 1300 mm Processing thickness: max. 80 mm Installed power: 9 kW 01 Low Pressure Pump 04 Painting units COMPOSITION: AGGREGATE I Dosing Unit Steel roller Speed adjustable via the CN control Power: 0.75 KW Speed: 1400 rpm AGGREGATE II Applicator Roller: Ø 250 mm rubber Power: 0.75 kW Speed: 1400 rpm AGGREGAT III Filler Steel roller Power: 0.75 KW Speed: 1400 rpm AGGREGAT IV Dosing Unit Steel roller Power: 0.75 kW Speed: 1400 rpm Control: SORBINI

0: 2000 mm Working width: 1800 mm Wheel width: 200 mm 4 pcs. roller conveyors 2000 x 200 x 1800 mm for internal and external processing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor, steel frame, steel rollers, roller width: 390 mm, total dimensions: 3020 mm x 450 mm x 730 mm.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Spiked roller WEHRMANN for better gluing on solid wood / plywood

Manufacturer: Transport Rollengang, Working length mm: 2500, Working widht mm: 800, Durchmesser Rolle mm: ca 80, Anschlaglineal link und rechts (ohne verstellung): yes, : ohne Antrieb,

Manufacturer: Rollenbahn, Driven: yes, incl.control: ohne Steuerung, Length-width mm: 1110x1745, Working widht mm: 1500, Total hight mm: 880 -+ 50, Roller pitch mm: 90, roller diameter: 80, Drive power kW: 0,5, FREE TEXT: Ein Fuss muss nachgerüstet werden,

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Manufacturer: Giardina, Type: Rollbahn, Year: ca.2005, Driven: yes, driven: yes, Length-width mm: ca.980, Total hight mm: 890 +/-, Adjustable: yes, Roller pitch mm: ca.220, Conveyor speed m/min: 10-25, Year :ca.2005

Manufacturer: Cefla, Type: Rollgang, Year: ca.2003, Working length mm: 1350, Working widht mm: 920, Ex-schutz: yes, UV-Band: ca220, Total hight mm: 80, Belt width: Schiene, Frequency converter: 3-5, Own controller: yes, Total power kW: ca.3000, Working length mm: 1350, verriegelungskontakt vor Maschine: 1600, Year :ca.2003

Manufacturer: Rollenbahn, Year: ca.1990, Driven: no, Length-width mm: 2500/und Teillängen, Working widht mm: 500, Width total mm: 550, Total hight mm: ca.290, Adjustable: no, FREE TEXT: vorhanden ca 300-400 Meter/Preise ist für einen Laufmeter, Year :ca.1990

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

pressure: 0,2-40 t max. workpiece diameter: 70 mm threading length: 120 mm Control: total power requirement: 29 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a used, reconditioned WP bunroll line type Rollmeister Basic Line SC 37 (without head machine) for sale. - line complete stainless steel design - The following products can be made: sliced rolls, round / smooth dough pieces, baguette rolls, hot dogs, ribs - Capacity range: approx. 3,650 pcs/h - Weight range: - round dough pieces (sliced) 40gr. – 65gr. - long-rolled dough pieces (cut and uncut) 40gr. – 65gr. - 3-row operation: 40gr. – 85gr. - round / smooth dough pieces over pretzel discharge 40gr. – 85gr. A WP Multimatic head machine can be offered on request. Price on request.

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

pressure: 20 - 300 kN adjustment of rolling slide: 50 mm diameter of rolling spindle: 120 mm roll spindle height over machine bed: 200 mm Control: SIN 840 taper length of the roll spindle: 200 mm rolling spindle turning speeds: 0 - 50 1/min torque per rolling spindle: 2700 Nm power capacity: 2 x 8,4 kW distance between rolling spindles: min. 271 / max. 368 mm rolling tool outer diameter: max. 300 mm total power requirement: 26 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling Promot loader cell Complete housing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric roll Bending Machine 3 rolls Capacity: 800 mm x 3 mm Rolls diameter: Ø 105 mm Motor: 4 CV New electrical panel Front/back rotation Voltage: 220 V Tri (possibility of reversing the motor in 380 V) Equipped with: Emergency stop Equipped with: Protective cover Dimensions (L x W x H): 2000 x 1300 x 1300 mm Weight: approx 1,5 T

Welding Width: 900 mm // Bag Length (Max): 10000 mm

General SKU248T375 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10208388 Year of construction1996 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical >  ...

General SKU248T376 MakeBühler TypeSDVE-1300 No.10208386 Year of construction1996 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food  ...

General SKU319M527 LocationBarneveld MakeLehmann TypeWD-13 No.09442 Main Features Motor55 KW Inlet diameter400 mm Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400mm Roll width1300mm Rolls placed inclinedcheck Motor+/- 55KW Hydraulic roll adjustmentcheck Rolls can be cooledcheck With inlet hoppercheck With scrapercheck MaterialMild steel General Year of construction1990 Floorspace2,7x1,7 M Total height1,8 M Weight5900 KGThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicLehmannMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food ...

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

Dimensions (L/W/H): 1650x460x120 mm Weight: 31 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Roller conveyor / roller conveyor with drive Condition: Used Model: Drive: Flat Belt Year of Make: 2013 Total length: approx. 33500 mm -consists of 12 parts: 1x approx. 1500 mm, 1x approx. 2000 mm, 10x approx. 3000 mm -result in 4 different systems: 1x 6500 mm, 3x 9000 mm Total width: approx. 650 mm Conveyor width: approx. 595 mm Roll diameter: approx. 50 mm Roller spacing/ center distance: approx. 50mm/ 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Colour: green Including SEW motor (0.25 KW) Price per meter Feet to be ordered separately Internal Article Number: 2026021101 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent pa ...

General SKU248T369 MakeBühler TypeSDVE-1300 No.10294318 Year of construction1998 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food  ...

General SKU248T371 MakeBühler TypeSDVE-1300 No.10188335 Year of construction1996 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm Motor75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2,6x1,7 m Total height1,6 m Weight4452 kgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Food  ...

General SKU248T372 MakeBühler LocationBarneveld TypeSDVE-1300 Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General No.10294316 Year of construction1998 Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food  ...

General SKU248T370 MakeBühler TypeSDVE-1300 No.10294314 Year of construction1998 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2,5x1,7 m Total height1,6 m Weight4452 kgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Fee ...

General SKU248T377 MakeBühler TypeSDVE-1300 No.10208385 Year of construction1996 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt With variable speed drive1800 rpm Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2560x1700 mm Total height1600 mmThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & sur ...

General SKU248T373 MakeBühler TypeSDVE-1300 No.10270830 Year of construction1996 LocationBarneveld Main Features Motor75 KW Width1300 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width1300 mm MotorLandert, 75 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialStainless steel General Floorspace2560x1700 mm Total height1600 mm Weight4452 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Feed > Foo ...

General SKU248T380 MakeBühler TypeSDVE-900 No.74873 Year of constructionunknown LocationBarneveld Main Features Motor55 KW Width900 mm Specified Features - Three roll mill Three roll millcheck Roll diameter400 mm Roll width900 mm MotorLandert, 55 kW, 400 Volt Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialMild steel, Stainless steel General Floorspace2400x1700mm Total height1600mm Weight4200 KgThree roll millsPaints & coatingsPowdered foodsCatalysts & fillersFeed additivesDetergent & surf.Food additivesAnimal feedDyes & pigmentsMinerals & inorganicBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Food & Fee ...

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Key data: 1000 mm, 450 mm

Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel

Roller / roller for pastry lineProduct description:Manufacturer: RheonType: 818Condition: used, not testedOuter dimensions: 95 x approx. 100 x 33 cm (WxDxH)Details see pictures

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor on: wheels -Roll diameter: 60 mm -Roll distance: 160 mm -Roll width: 400 mm -Roll height: 290 mm -Transport length: 800 mm -Dimensions: 1120/580/H340 mm -Weight: 42 kg -Total height of roller conveyor: approx. 285 mm -Transport dimensions: 1990/1015/H285 mm -Weight: 130 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, -Ideal for: band saw, cold circular saw, ... -Execution: difficult -not powered -Roll width: 410 mm -Transport length: 2000 mm -Roles: Ø 48 mm -Roll distance: 390 mm -Total height of roller conveyor: 660 mm adjustable -Transport dimensions: 2000/680/H660 mm -Weight: 214 kg