129,827 used machines on RESALE, but how to find them? Machine Search
Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough ...
Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right
Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.
Rated load capacity: 5t, clamp pressure/working pressure: 18/16MPa, front overhang: 575mm, center of gravity Px/Py: 480/810mm, weight: 2.1t. An inspection on site is possible.
Parasol base metal approx. 80x80 cm rollable, with 4 exposed concrete slabs
Card stand steel rollable, grey, with wall shelves, 2 pcs.
Disinfectant dispenser metal base rollable, without Euro bottle
Magazine rack rollable grey approx. 100x45x192h cm
Equipped with conveyor belt 1000x400 mm with Foenix FX label / marking machine, discharge roller conveyor 400 mm wide, approximately 11 meters long Auction-ID: A1-45771-15
Includes: sanding roll, paper roll, foil, foam, etc. Auction-ID: A1-45979-164
Curves roller conveyor; Height approx. 800mm; Depth approx. 1600mm; Width approx. 3200mm; Condition as is.
Not-working Machine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 70 Serial number: H1520786 Year of manufacture: 2011 Engine: Deutz BF4M 2011 diesel engine Engine power: 60 kW Operating weight: 7,265 kg Basic weight: 6,765 kg Max. weight: 9,900 kg Drum type: Double smooth drum Cab: Enclosed operator cabin Manufacturer location: Germany Remarks: - CE marked machine - Original HAMM identification plate available - Engine information plate visible (Deutz engine) - Operating hours reading approx. 5,566 h (analog meter) - Typical wear on drums and body consistent with age - Machine from Wirtgen Group production Auction-ID: A7-45990-8
Machine type: Tandem vibratory roller Manufacturer: DYNAPAC Model: CC224HF Year of manufacture: 2010 Product identification number: Y10000311C0A00474 Engine: Cummins QSB 3.3 Technical data: Power: 60 kW Operating weight: 8,120 kg Gross weight: 10,700 kg Max axle load (front/rear): 4,600 / 6,700 kg Equipment: - Double steel drum - Vibratory system - Open operator platform with canopy (ROPS) - Water spray system - Articulated steering - Lighting system Condition: - Used condition - Visible wear and corrosion on drums and body - Paint damage and surface rust - Interior intact with normal wear - Functional condition not tested Remarks: - NOT-working - Suitable for asphalt and soil compaction - Robust and reliable model - Made in Sweden Own mass: approx. 8,120 kg Auction-ID: A7-45990-35
Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43535-16521
4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43535-16520
MCB2522 4 roll hydraulic plate bending machine Make Davi Italy - year 03/95 Plate width 2500 mm Plate thickness 10 mm Prebending 8 mm top roll size 220 mm Electric power Hp 7,5 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital readouts -Extended rolls front shafts -Predisposed with additional hydraulic circuitry to connect a side support or top support ---- Cleaned lubricated , tested Machine refurbished in working conditions ready for use. CE quality certification made in Italy . Manuals and schematics with the machine.
3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton
equipped with safety fencing Auction-ID: A1-41997-53
Equipped with drive! Approx. 2 to 4 tons; remote control included; Auction-ID: A1-41997-96
Width per section: 2.70 meters Number of sections: 4 pieces Total width: 10.8 meters Depth per section: 3 meters Number of levels per section: 4 floors Surface per level: 10.8 × 3 = 32.4 m² Number of levels: 4 Total area: 32.4 × 4 = 129.6 m² Auction-ID: A1-40113-10
galvanized steel; equipped with 4x tube; maximum foil width 1600 mm; equipped with forklift fork slots; Auction-ID: A1-46651-510
well functioning, equipped with: pin 35mm tension, mechanical support leg, control box, stabbing pick-up, Trelleborg 600/55-26.5 tires, foil wrapper, output with support wheel, LED lighting, lubrication system, Auction-ID: A1-40139-34
2 shelves with tube Ø60mm, including foil and accessories Auction-ID: A1-46623-77
A Bürkle combined roller coating machine with a UV unit is available. Working width: 1300mm, pass-through height range: 3mm-80mm, working height range: 880mm-920mm, workpiece length range: 300mm-1500mm, workpiece width range: 200mm-1250mm, workpiece thickness range: 3mm-30mm, feed rate: 12m/min, max. coating speed: 10m/min, processing sides: 1, UV unit type: TRUV 1300, arc length: 1420mm, lamp output: 120W/cm, coating roller diameter: 238mm, dosing roller diameter: 174mm, smoothing roller diameter: 238mm, roller width: 1300mm. UV module length: 1500mm, machine length SAS 1300: 1050mm, control cabinet dimensions X/Y/Z: approx. 1600mm/2200mm/500mm, weight SAS 1300: approx. 2100kg, control system: Siemens S7-200. Documentation available. An on-site inspection is possible.
Roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with pull-off conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor -Roller conveyor: completely electrically movable -Telescope: extendable to 10,620 mm -Roll width: 800 mm -Length: 5230-10,620mm -Load capacity: up to 50 kg/m -Working height: 1615 mm -Transport dimension: 5230/1320/H2170 mm -Weight: about 2000 kg
Consisting of: a.o. Approx. 6 mounting frames Protect 120/ 7 rungs Approx. 2 mounting frames Protect 120/ 4 rungs Approx. 2 horizontal struts 180 Approx. 4 diagonal struts 180 Approx. 4 rolls Approx. 4 Tower Protect 180 platforms, 3 of which with hatch incl. pallet, pack size approx. 3000x1400x800 mm Auction-ID: A1-47009-45
Top-mounted roller shutter, electr., new, orig. packaging, W 920 x H 2360mm Box dimension W 920mm x H 220mm x D 255mm SO001136 Auction-ID: A1-46973-215
Top-mounted roller shutter, electr., new, orig., W 930 x H 2130mm Box dimension W 930mm x H 225mm x D 255mm SO001135 Auction-ID: A1-46973-214
Consisting of: a.o. Approx. 3 mounting frames/ 7 rungs Approx. 1 solar frame Approx. 9 railing frames Protect 180 Approx. 4 diagonal struts 180 Approx. 4 triangular booms type B Approx. 2 platforms platforms, 2 of them with hatch Approx. 4 rolls Approx. 1 basic profile for material lift Approx. 2 profiles long Approx. 1 profile short Approx. 1 material lift box Approx. 1 bracket for material lift incl. SELF-MADE pallet rack, pack size approx. 3000x1620x1500 mm Auction-ID: A1-47009-30
Top-mounted roller shutter, electr., new, orig. box W 2440 x H 1300mm Box dimension: W 2440mm x H 190mm x D 220mm SO001132 Auction-ID: A1-46973-212
Top-mounted roller shutter, electr., new, orig., W 1450 x H 1200mm Box dimension: W 1450mm x H 185mm x D 220mm SO001134 Auction-ID: A1-46973-213
Top-mounted roller shutter, electr., new, orig. box W 2940 x H 1430mm Box dimension W 2940mm x H 190mm x D 220mm SO001131 Auction-ID: A1-46973-211
Top-mounted roller shutter, electr., new, orig. box W 830 x H 2360mm Box dimension: W 830mm x H 220mm x D 255mm SO001130 Auction-ID: A1-46973-210
Surface-mounted roller shutter, electric, new, orig. packaging W 1450 x H 1200mm Box dimension W 1450mm x H 190mm x D 220mm SO001129 Auction-ID: A1-46973-209
used
Er worden 3 rollen aangedreven - directe transmissie geharde rollen digitale uitlezing conische buiging permanente smering Planetaire beweging: minimaliseert contact en wrijving tussen de onderdelen, waardoor de buigprestaties verbeteren. gt; Directe overbrenging: versnellingsbakken gekoppeld aan de rollen, lagers en Hydraulische motoren om het energieverbruik te verminderen en de sleepkracht te verbeteren. gt; Permanente smering: alle onderdelen zijn voorgesmeerd en levenslang afgedicht. gt; Rolbuiging: bi-conische vormgeving om ton- of spoeleffect te voorkomen gt; Bewegingscontrole en rolparallellisme gt; Conisch buigsysteem Number of rolls: 3 rolls Roll capacity cold: 3100 x 20 mm Roll dia upside: 340 mm Dia under roll - side rolls: 320 mm Power needed: 11 kW Weight: 9 ton
Conveyor - Ref 3847 Manufacturer: SOCOSYSTEM Belt width: 510mm Overall dimensions [min-max] (LxWxH): 1450x570x[720-1220]mm Auction-ID: A1-47051-144
Roller conveyor - Ref 6780 Overall dimensions (W x D x H): 1230 x 610 x 780 mm Roll dimensions: 550 mm Equipment weight: 50 Kg Roll diameter: Ø 50 Auction-ID: A1-47051-171
Roller Conveyor - Ref 6785 Overall dimensions (W x D x H): 3300 x 1500 x 1300 mm Roll width: 60 mm Roll diameter: 45 mm Weight: 100 kg Incoterm: FCA Auction-ID: A1-47051-173
Roller Conveyor - Ref 6383 Overall dimensions (W x D x H) folded: 800 x 520 x 670 mm Overall dimensions (W x D x H) unfolded: 2360 x 520 x 670 mm Weight: 60 kg Incoterm: EXW Auction-ID: A1-47051-116
Multivac thermoformer with film roll holder, type: R535, machine number: 140005, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 67/80 A, 27 A, dye: (8x) 160 mm x 120 mm, film width: 530 mm, index: 360 mm, total dimensions: 13700 mm x 1300 mm x 2300 mm and 1500 mm x 1200 mm x 600 mm.
Viewing by appointment Auction-ID: A1-43891-34
Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-43891-32
material width:180 mm coil weight:0,75 t material thickness:2,0 - 6,0 mm coil external diameter:400 - 1250 mm no. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/min power requirement:4,0 kW weight:2,8 t dimensions (WxDxH):1,4 x 2,45 x 1,85 m snubber roll:pneumatic
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:2,8 t Dimensions (WxDxH):1,6 x 2,2 x 2,3 m
material width:850 mm material thickness:0,3 - 1,5 mm no. of straightening rolls:8 straightening roll diameter:40 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm material thickness with 600 mm material width:1,9 mm material thickness with 400 mm material width:2,3 mm speed:5 - 25 m/min min. material width:200 mm weight:3,1 t Dimensions (WxDxH):2,2 x 1,5 x 2,8 m
material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m
material width:250 mm material thickness:0,4 - 3,5 mm no. of straightening rolls:9 straightening roll diameter:30 mm speed:3 - 15 m/min material thickness at 250 mm material width:3,0 mm material thickness at 200 mm material width:3,5 mm power capacity:1,8 kW weight:0,9 t Dimensions (WxDxH):1,45 x 1,4 x 1,55 m
maximum number of results exceeded
please refine your search
7 € 
