130,758 used machines on RESALE, but how to find them? Machine Search
Attention, without drive! Approx. 30 tons Auction-ID: A1-41997-95
sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebrauchtmaschine, price: 4000 Euro ohne Transport
Key data: 550 mm, 1500 mm
Rolling mill 60" See attachment for details!
Transnorm roller conveyor with ejector 6200-700-640 RA2278 Make: Transnorm Running direction: both directions Roller width (RB): 640 mm Nominal/outer width (NB): 700 mm Length: 6200 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, RF27 DT80N4/MM07/BW1 Electrical data: V 380, kW 0.75/S1 Frame height: 120 mm Total of 2 dischargers Conveying speed: please contact us Optionally available: Supports Side guides on one and both sides Frequency inverter for stepless speed control Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 380-500V condition: very good (used) Conveying length in mm: 6200 Nominal / outside width in mm: 700 Roll width in mm: 640 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / ...
Attention, without drive! Approx. 30 tons Auction-ID: A1-41997-97
Transnorm accumulation roller conveyor 24V 2333-670-655 RA2148 Make: Transnorm Running direction: both directions Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 2332mm, 4 pieces in stock Roller diameter: 50 mm Roller spacing: 60 mm Roller conveyor motor: SEW roller motor 24V Electrical data: 220V AC supply line drive, via loop-through to each motor controller, 24V light reflector Frame height: 100 mm one element has 3 storage spaces with a size of approx. 800 mm Conveying speed: adjustable in steps with roller drum motor Optionally available: Supports Side guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 220V Conveying length in mm: 2333 Nominal / outside width in mm: 670 Roll width in mm: 655 Roll division in mm ...
Key data: 400 mm, 900 mm
available 35" Mill on Baseframe more details in attached description!
Lippelt Rustica Mini Square Bread Roll Line - with 3 cutting rollers - with moistening and seed sprinkling - Poppy Rumo - Both machines are mobile on castors - Completely clad in stainless steel - 1.0 kW - Built in 1999
-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010
21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)
Mecalux transfer roller conveyor slider 90° 915-1410-870+445 RA1915 Make: Mecalux Running direction: both directions Roller width (RB): 870 to 450 mm Nominal/outer width frame (NB): 960 and 540 mm Total width: 1410 mm Length: 915 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 2x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 725 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides Features: Construction year: 2017 condition: very good (used) nominal voltage: 400, 24V angle: 90° Conveying length in mm: 915 Nominal / outside width in mm: 540, 960, 1410 Roll width in mm: 870 Roll division in mm: 75 Driven: YES Engine type: Lenze Getriebemotor, ITOH-Deki 16936/010 24 ...
Key data: 340 mm, 700 mm
available 27" Mill Description Attached!
Key data: 190 mm, 450 mm
available Lab Mill! Description attached !
Key data: 305 mm, 550 mm
available 22" Mill Decription attached!
Fortuna semi-automatic bread roll press size A4 Bakery condition Ball knob repaired with duct tape two press plates as good as new Knife in very good condition, as not used for sourdough absolutely neat and smooth running Video about test run and more pictures available
Plate rolling machine manufactured in 2022. This FACCIN 4HEL-2017 features a bending length of 2000 mm and a maximum bending capacity of 6 mm for mild steel. It is capable of handling plate thicknesses up to 6 mm without prebending at specific conditions. If you are looking to get high-quality bending capabilities, consider the FACCIN 4HEL-2017 machine we have for sale. Contact us for further details.
Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: Bitte wählen Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...
Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...
Minakuchi NWT-300 CNC Cylindrical (ROLL) Grinder, I.D. Spindle, Fanuc O-GC, 30HP, New 1990 Machine Overall Capacity: 32" x 120" Swing: 32" Distance Between Centers: 120" Max. Swing over Table: 32" Max. Grinding Diameter: 30" Max. Work Piece Weight: 20000 LBS. Estimate at 32" x 120" Grinding Wheel: 24" x 1.968" x 10" Max. Grinding Wheel Width: 1.968" Spindle Speed: 1410/1530 RPM Spindle Wheel Motor: 30 HP Machine Weight: 30000 Lbs. Approximately Equipped with: Control: Fanuc Series O-GC (Parameters need to be reloaded) Fanuc Remote Hand Wheel Machine control functions: Coolant On/Off Switches, MODE: Off/Auto/Jog/Handle/Zero, Over Ride: 0-150%, Buttons: PRC, HIX, Spindle Inching, OTR on/off Switch, Cycle Start, Spindle Off, RT, Return, Feed Hold, Grind Off, ZRN, Emergency Stop Button Taper or Crowning Grinding Wheel Head Motor Work Head Work Rest Supports Extra Wh ...
Roller table for transferring crates or trays or similar
Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) angle: 90° Construction year: 2003 nominal voltage: 380-500V Conveying length in mm: 1397, 1750 Nominal / outsid ...
Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
material width:150 mm material thickness:1,5 mm power requirement:3,0 kW no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:4 weight:0,67 t Dimensions (WxDxH):1,3 x 1,1 x 1,6 m
material width:300 mm material thickness:- 3,0 mm no. of straightening rolls:7 Stück straightening roll diameter:60 mm weight:0,8 t Dimensions (WxDxH):0,9 x 1,5 x 1,4 m
used
1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²
Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...
material width:380 mm coil weight:1,0 t material thickness:2,5 mm coil external diameter:1000 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:90 mm weight:0,8 t Dimensions (WxDxH):0,8 x 1,3 x 1,7 m
Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...
material width:500 mm material thickness:0,6 - 1,6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 inlet roll diameter:60 mm max. material thickness:2,0 mm material thickness at 150 mm material width:2,0 mm material thickness at 500 mm material width:1,6 mm weight:0,5 t dimensions (WxDxH):0,8 x 1,0 x 1,2 m
material width:300 mm material thickness:0,6 - 2,5 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mm max. material thickness:3,5 mm material thickness at 30 mm material width:3,0 mm material thickness with 300 mm material width:2,5 mm weight:0,3 t Dimensions (WxDxH):0,9 x 1,0 x 1,1 m
Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...
material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m
material width:120 mm material thickness:0,4 - 4,0 mm no. of straightening rolls:19 straightening roll diameter:24 mm material cross-cut:120 mm² :40 mm bending speed:5 - 25 m/min weight:0,85 t dimensions (WxDxH):1,2 x 1,7 x 1,6 infinitely variable drive:Stöber
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...
Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...
material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m
material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m
Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal ...
material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002
material width:200 mm material thickness:0,5 - 3,0 mm no. of straightening rolls:6 straightening roll diameter:70 mm number of draw-in rolls:2 diameter of draw-in rolls:160 mm power requirement:3,1 kW weight:1,1 t dimensions (WxDxH):1,5 x 1,2 x 1,9 m
material width:310 mm no. of straightening rolls:5 straightening roll diameter:25 mm dimensions (WxDxH):0,4 x 0,6 x 1,15 m
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!
maximum number of results exceeded
please refine your search
500 € 
